AKX040 GPM Aluminum wheelie bar with wing mount for Arrma Kraton / Outcast 8S

€89.90*

Available

Product number: gpm_akx040

EAN: 4058575139270

Product information "AKX040 GPM Aluminum wheelie bar with wing mount for Arrma Kraton / Outcast 8S"

Genuine GPM spare/option part.

Milled 6061T6 aluminum wheelie bar with wing mount for Arrma Kraton / Outcast 8S.
Significantly stronger than the stock part, it also offers an adjustment option for the angle of the wing.

Double ball bearing 55 mm diameter wheels made of Delrin with replaceable O-rings as "tread".

Contents:

1 set

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

Display reviews in current language only.

No reviews found. Share your insights with others.

Similar products

AKX054 GPM aluminum a-arms front upper for Arrma Kraton / Outcast 8S

Genuine GPM spare/option part. GPM front upper aluminum a-arms for Arrma Kraton / Outcast 8S, CNC- machined from 6061-T6 aluminum. More torsion-resistant than the standard plastic parts and with an exchangeable plastic bushings for the wishbone pin.Comes complete with wishbone pins (direct replacement for original sets ARA330561 and ARA330564).Contents:2 pieces

€39.90*

AKX008 GPM aluminum hinge pin brackets front suspension, lower, for Arrma Kraton / Outcast 8S

Genuine GPM spare/option part. Milled 6061T6 aluminum additional heat sink from GPM with larger 12 volt fan (60 x 60 x 15 mm) for Arrma Kraton / Outcast 8S. The additional heat sink also serves as an adapter plate to mount the larger fan on the original heat sink. A machined contact guard for the intake side of the fan is also included.The fan is connected to the EC5 connector of a 3S or 4S drive battery using an adapter cable (included). Thus, the operating current does not have to be provided by the ESC's BEC.The overall height of the unit, measured from the bottom of the additional heat sink is about 30 mm.Contents:2 pieces

€29.90*

AKX005 GPM Closed wheel nuts for Arrma Kraton/Outcast 8S

Genuine GPM spare/option part. Closed wheel nuts made of 6061T6 aluminum from GPM, suitable for Arrma Kraton/Outcast 8S.Secure hold of the rim due to large flange with 34 mm diameter and serrated surface.Wrench size: 24 mmThread size: M18x1,0Thread depth: 9 mmContents:4 pieces

€19.90*

AKX056 GPM rear lower aluminum a-arms for Arrma Kraton / Outcast 8S

Genuine GPM spare/option part. GPM rear lower aluminum a-arms for Arrma Kraton / Outcast 8S, CNC- machined from 6061-T6 aluminum. More torsion-resistant than the standard plastic parts and with an exchangeable plastic bushing for the wishbone pin.Comes complete with outer wishbone pins (replaces original sets ARA330590 and ARA330564).Contents:2 pieces

€59.90*

AKX055 GPM front lower aluminum a-arms for Arrma Kraton / Outcast 8S

Genuine GPM spare/option part. GPM front lower aluminum a-arms for Arrma Kraton / Outcast 8S, CNC- machined from 6061-T6 aluminum. More torsion-resistant than the standard plastic parts and with an exchangeable plastic bushing for the wishbone pin.(Direct replacement for original set ARA330589)Contents:2 pieces

€59.90*

AKX181F/RS GPM CVD drive shafts for Arrma Kraton / Outcast 8S

Genuine GPM spare/option part. GPM CVD drive shafts for Arrma Kraton / Outcast 8S, completely made of hardened steel; fits front and rear.These are complete drive shafts, including wheel shafts and CVD center parts. (Replaces original sets 2x ARA310926, 1x ARA310932 and 1x ARA310933)Contents:2 pieces

€59.90*

Details

MAKX021 GPM Aluminum front spindles, Arrma Kraton / Outcast 8S

Genuine GPM spare/option part. Front spindles from GPM for Arrma Kraton / Outcast 8S, machined from 6061 aluminum. Extremely torsion-resistant and robust.Contents:2 pieces

€64.90*

AKX009 GPM aluminum hinge pin brackets rear axle, lower, for Arrma Kraton / Outcast 8S

Genuine GPM spare/option part. GPM aluminum lower hinge pin brackets rear axle for Arrma Kraton / Outcast 8S, CNC- machined from 6061-T6 aluminum. With this set, the multi-part front bracket is replaced by a one-piece design with plastic bushings.(Replaces original sets ARA330555, ARA330588 and ARA330557)Contents:2 pieces

€29.90*

AKX018 GPM additional heat sink with fan for Arrma Kraton / Outcast 8S

€39.90*

AKX022 GPM rear uprights for Arrma Kraton / Outcast 8S

Genuine GPM spare/option part. GPM rear uprights for Arrma Kraton / Outcast 8S, CNC machined from 6061-T6 aluminum. More torsion-resistant than the standard plastic parts and with a more secure fit for the ball bearings.Comes complete with wishbone pins and screws (directly replaces original sets ARA330565, ARA330564 and ARA723430)Contents:2 pieces

€64.90*

AKX028 GPM front shock tower for Arrma Kraton / Outcast 8S

Genuine GPM spare/option part. GPM front shock tower for Arrma Kraton 8S, CNC- machined from 6061-T6 aluminum. More torsion-resistant than the standard plastic parts.The scope of delivery also includes the necessary screws!Direct replacement for original part ARA320475.Contents:2 pieces

€49.90*

MAKX015FA Front Brace Mount CNC Aluminum Kraton / Outcast 8S

Genuine GPM spare/option part. Same effect as Arrma option part ARA320615, but for a fracture of the price!Contents:1 piece

€13.90*

Customers also viewed

TR4E FG electric truggy 4WD 200A / 8S, used

The vehicle is being sold as used on behalf of a customer. The original price is 1339 euros! The FG TR4E Truggy 4WD has only been run for 10 minutes and is in as good as new condition ! It is delivered without transmitter set. A powerful 55KG steering servo provides sufficient steering power. A TopTuning 700KV 4 pole brushless motor and a 200A Beast Pro speed controller are installed. You need a transmitter set, 2x4S batteries and a charger, then you're ready to go. Take a look at the photos. No matter where you perform with it and where you use it - with the FG TR4E you will be at the front of the pack! The E stands for electric power, the 4 for all-wheel drive. Extremely fast, powerful torque and all without noise. The TR4 is equipped with a powerful brushless motor and a controller. The electric power means extremely high torque, high top speed and all without engine noise. The Sportsline models are equipped with a powerful brushless motor and a brushless controller. Thanks to the built-in all-wheel drive, the models can be easily manoeuvred through any terrain without getting stuck. The controller can be easily adjusted via the transmitter or optionally via a programming card.

€990.00*

Configure now

y0042 Brake cleaner 500 ml, 1 pce.

Fast and thorough cleaning action, acetone-free!Removes lining abrasion, grease, oil, brake fluid, dirt and more. Cleans metal, glass, ceramics a.s.o.. Prevents dispersal of harmful abrasive dust. Spray parts until dirt and grease are washed away or wipe with a clean cloth.Also for degreasing gluing spots ...Content: 500 ml spray can.

Content: 500 Milliliter (€15.00* / 1000 Milliliter)

€7.50*

y1445/01 MadMax MAXI PIN tires for FG/Smartech & Co (18mm wheel square)

MAXI PIN 185 x 75 with black colored MadMax Extreme rims, 20-fold screwed, very tough, with 18 mm square drive and with reinforced orange beadlock rings for FG, Smartech and many more. The MadMax MAXI PIN tires come with strong special tire inserts which allow transferring the power without canting, even on heavy cars. MadMax MAXI PIN tire was developed specifically for astro turf tracks! The special tread design with 480 studs per tire provides excellent grip, but also a high load on tire and rim! To stabilize the tire, the outer shoulder features radial ribs which minimizes the tilting under load and counteract the shear forces during cornering. Furthermore, the MAXI PIN tire has studs positioned on the outside shoulder, which support the steering in corners. All together the MAXI PIN tires provide maximum grip, which made it necessary to upgrade the beadlock screws on these MadMax EXTREME wheels. So they come with 3.0 mm screws instead of the usual 2.5 mm ones! Nevertheless, tires and beadlocks should be checked after every run. Dimensions: Outer diameter: 185 mm tire width at bead: 70 mm Tread width: 75 mm Reinforced 18 mm square wheel drive Some off-road tires knowledge can be found here!The video shows the 18 mm square drive version. Also available with 24 mm hex.

From €129.90*

Details

Fully assembled alloy diff incl. reinforced diff. tube and bevel diff. gearwheel for FG 2WD/4WD + Carson/Smartech 2WD

y0570 Typ: y0571 For Carson cars

Genuine HT spare/option part. Fully assembled Alloy differential including reinforced differential-tube and "inner-workings", such as original planetary gears, differential bevel gears, bevel differential wheel axles, sealed bearings, differential shafts with needle bearings (high-speed needle bearing).You only have to insert your full-floating axle (halfshafts). Since the FG and Carson are having different internal teeths by the planetary gears, different versions for FG and Carson/Smartech 2WD are available.Even on heavy off-road use and especially on jumps there are often problems with the original plastic differential. Noticeable is also the relatively thin differential-tube of the serial-equipping. Therefore our special offer for the complete Alloy differential including extra reinforced differential-tube.Set includet:8486 Alloy differential housing6068 Bevel differential gear axle6066/01 Differential bevel gear A, spline drive 6067 Differential bevel gear BFG ball bearings, sealed, y19610-rsReinforced differential tube for FG buggy differential, y09028498/01 Needle bearing for alloy differentialContents:1 set

€189.90*

ARA409003 ARRMA Outcast 8S Body Color 1/5 painted

Genuine ARRMA spare/option part. Contents:1 pieces

€129.99*

y0897 Wheelie bar with suspension for 2WD + 4WD models - 1pce.

Wheelie bar with double ball raced wheel, cnc-machined from high strength alloy. The arm has a rubber suspension unit, the height is infinitely adjustable. The suspension allows for a maximum deflection of 30 degrees and is dirt- and mud-proof. The wheel bearings are sealed.The unit fits FG Monster Truck, Monster Beetle and Marder BigFoot, except for Monster Buggy Off-Road WB535 4WD. Installation on other models will be possible, but requires modifications to the chassis, mainly to accept the bolt pattern. The Carson Attack already has the correct pattern.

€89.90*

ARA310915 ARRMA Diff Case for Kraton / Outcast 8S

Genuine ARRMA spare/option part. Contents:1 piece

€19.99*