MAKX024N GPM Aluminum servo saver with spring, 25T, with servo adapter frame, Arrma Kraton / Outcast 8S

€44.90*

Available

Product number: gpm_makx024n

EAN: 4058575140900

Product information "MAKX024N GPM Aluminum servo saver with spring, 25T, with servo adapter frame, Arrma Kraton / Outcast 8S"

Genuine GPM spare/option part.

Servo saver machined from 7075 T6 aluminum by GPM for Kraton / Outcast 8S. Much stronger than the stock plastic part.
Fits servos with 25T spline shaft.

Comes with a 6061 aluminum adapter frame for installation of a small steering servo (40/20/20 size).

Note: due to the replacement of standard servo, the center point of servo is slightly offset, so the length of the servo linkage needs to be adjusted.

Contents:

1 set

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

No reviews found. Share your insights with others.

Similar products

AKX054 GPM aluminum a-arms front upper for Arrma Kraton / Outcast 8S

Genuine GPM spare/option part. GPM front upper aluminum a-arms for Arrma Kraton / Outcast 8S, CNC- machined from 6061-T6 aluminum. More torsion-resistant than the standard plastic parts and with an exchangeable plastic bushings for the wishbone pin.Comes complete with wishbone pins (direct replacement for original sets ARA330561 and ARA330564).Contents:2 pieces

€39.90* €49.90* (20.04% saved)

AKX040 GPM Aluminum wheelie bar with wing mount for Arrma Kraton / Outcast 8S

Genuine GPM spare/option part. Milled 6061T6 aluminum wheelie bar with wing mount for Arrma Kraton / Outcast 8S.Significantly stronger than the stock part, it also offers an adjustment option for the angle of the wing.Double ball bearing 55 mm diameter wheels made of Delrin with replaceable O-rings as "tread".Contents:1 set

€84.90*

AKX055 GPM front lower aluminum a-arms for Arrma Kraton / Outcast 8S

Genuine GPM spare/option part. GPM front lower aluminum a-arms for Arrma Kraton / Outcast 8S, CNC- machined from 6061-T6 aluminum. More torsion-resistant than the standard plastic parts and with an exchangeable plastic bushing for the wishbone pin.(Direct replacement for original set ARA330589)Contents:2 pieces

€59.90* €74.90* (20.03% saved)

AKX056 GPM rear lower aluminum a-arms for Arrma Kraton / Outcast 8S

Genuine GPM spare/option part. GPM rear lower aluminum a-arms for Arrma Kraton / Outcast 8S, CNC- machined from 6061-T6 aluminum. More torsion-resistant than the standard plastic parts and with an exchangeable plastic bushing for the wishbone pin.Comes complete with outer wishbone pins (replaces original sets ARA330590 and ARA330564).Contents:2 pieces

€59.90* €74.90* (20.03% saved)

AKX005 GPM Closed wheel nuts for Arrma Kraton/Outcast 8S

Genuine GPM spare/option part. Closed wheel nuts made of 6061T6 aluminum from GPM, suitable for Arrma Kraton/Outcast 8S.Secure hold of the rim due to large flange with 34 mm diameter and serrated surface.Wrench size: 24 mmThread size: M18x1,0Thread depth: 9 mmContents:4 pieces

€19.90*

AKX028 GPM front shock tower for Arrma Kraton / Outcast 8S

Genuine GPM spare/option part. GPM front shock tower for Arrma Kraton 8S, CNC- machined from 6061-T6 aluminum. More torsion-resistant than the standard plastic parts.The scope of delivery also includes the necessary screws!Direct replacement for original part ARA320475.Contents:2 pieces

€49.90*

MAKX021 GPM Aluminum front spindles, Arrma Kraton / Outcast 8S

Genuine GPM spare/option part. Front spindles from GPM for Arrma Kraton / Outcast 8S, machined from 6061 aluminum. Extremely torsion-resistant and robust.Contents:2 pieces

€64.90*

MAKX187R GPM shocks for Arrma Kraton / Outcast 8S, f/r

Genuine GPM spare/option part. These GPM shocks are basically the same as the piggyback version, just without the piggyback. This allows for a more budget-friendly price.Shocks come in pairs including all-metal lower ball joints, spring perches and two pairs of springs with 2.6 mm and 2.8 mm wire diameter. Reinforced shock shafts with 6 mm diameter.Fits Arrma Kraton 8S rear as well as Outcast 8S front and rear applications!Length extended/compressed (center-to-center of mounting points): approx. 190 mm/131 mm.Contents:2 pieces

€69.90*

MAKX015FA Front Brace Mount CNC Aluminum Kraton / Outcast 8S

Genuine GPM spare/option part. Same effect as Arrma option part ARA320615, but for a fracture of the price!Contents:1 piece

€13.90*

MAOX025 GPM chassis struts for Arrma Outcast 8S Vers.2

Genuine GPM spare/option part. GPM chassis struts front / middle / rear for Arrma Outcast 8S version 2 (chassis struts), one-piece design for greater rigidity, without screwed-on plastic heads.(Replaces original struts ARA320550 / ARA320560/ ARA320595/ ARA320596 with heads ARA320477)Contents:1 set

€69.90*

AKX018 GPM additional heat sink with fan for Arrma Kraton / Outcast 8S

Genuine GPM spare/option part. Milled 6061T6 aluminum additional heat sink from GPM with larger 12 volt fan (60 x 60 x 15 mm) for Arrma Kraton / Outcast 8S. The additional heat sink also serves as an adapter plate to mount the larger fan on the original heat sink. A machined contact guard for the intake side of the fan is also included.The fan is connected to the EC5 connector of a 3S or 4S drive battery using an adapter cable (included). Thus, the operating current does not have to be provided by the ESC's BEC.The overall height of the unit, measured from the bottom of the additional heat sink is about 30 mm.Contents:1 set

€39.90*

AKX048 GPM steering assembly for Arrma Kraton / Outcast 8S

Genuine GPM spare/option part. GPM steering assembly for Arrma Kraton / Outcast 8S, CNC- machined from 6061-T6 aluminum and with 8 ball bearings. More torsion-resistant, less slack and friction than with the standard plastic parts.The scope of delivery includes replacements for original parts ARA320474, ARA340153, ARA340160 as well as ball bearings and screws.The standard steering posts ARA340159 will be re-used!Contents:1 set

€89.90*

Customers also viewed

y1570 CYS S0650 large scale servo with Double sided alloy servoarm, 55 kg/0,11 sec

CYS S0650, a digital large scale servo with very robust steel gears. It offers a lot of power at good speed. Its a direct fit for cars like Losi 5ive and DBXL, UFRC Growler GX1, FG and so on.Technical data: Operating voltage: 6V-7.4V Operating speed (6.0 V): 0.13 s / 60 degrees Operating speed (7.4 V): 0.11 s / 60 degrees Holding torque (6.0V): 470 Ncm holding torque (7.4V): 539 Ncm Cable: Universal/JR connector, approx. 300mm Gear material: 1st stage brass, all others steel Bearing: 2 x ball bearing Size: 66 x 30 x 56mm Weight: 204 grams Double sided servo arm 68mm length Guide sleeve 4 pieces Mounting screws 4 pieces Mounting screws for servoarm 1 piecesContents:1 piece

€69.90*

MAKX024 GPM Aluminum servo saver with spring, 25T, with servo adapter frame, Arrma Kraton / Outcast 8S

Genuine GPM spare/option part. Servo saver machined from 6061 T6 aluminum by GPM for Kraton / Outcast 8S. Much stronger than the stock plastic part. The splined section for installation on the servo is machined from 7075 aluminum for increased strength.Fits servos with 25T spline shaft.Comes with a 6061 aluminum adapter frame for installation of a small steering servo (40/20/20 size).Note: due to the replacement of standard servo, the center point of servo is slightly offset, so the length of the servo linkage needs to be adjusted.Contents:1 set

€37.90*

ARA340165 ARRMA Servo Saver Plastic Parts Set for Kraton / Outcast 8S

Genuine ARRMA spare/option part. Contents:1 set

€15.99*