AKX013 GPM gear box f/r for Arrma Kraton / Outcast 8S
Product number:
gpm_akx013
EAN:
4894538341874
Product information "AKX013 GPM gear box f/r for Arrma Kraton / Outcast 8S"
Genuine GPM spare/option part.
GPM gear box for Arrma Kraton / Outcast 8S, CNC- machined from 6061-T6 aluminum. More torsion-resistant than the standard plastic parts, with a more secure fit for the ball bearings and constant backlash even under high loads.
Fits front and rear.
(Direct replacement for original set ARA310935)
Contents:
GPM gear box for Arrma Kraton / Outcast 8S, CNC- machined from 6061-T6 aluminum. More torsion-resistant than the standard plastic parts, with a more secure fit for the ball bearings and constant backlash even under high loads.
Fits front and rear.
(Direct replacement for original set ARA310935)
Contents:
- 1 set
Login
Similar products
Genuine GPM spare/option part. GPM front upper aluminum a-arms for Arrma Kraton / Outcast 8S, CNC- machined from 6061-T6 aluminum. More torsion-resistant than the standard plastic parts and with an exchangeable plastic bushings for the wishbone pin.Comes complete with wishbone pins (direct replacement for original sets ARA330561 and ARA330564).Contents:2 pieces
Genuine GPM spare/option part. Milled 6061T6 aluminum wheelie bar with wing mount for Arrma Kraton / Outcast 8S.Significantly stronger than the stock part, it also offers an adjustment option for the angle of the wing.Double ball bearing 55 mm diameter wheels made of Delrin with replaceable O-rings as "tread".Contents:1 set
Genuine GPM spare/option part. GPM front lower aluminum a-arms for Arrma Kraton / Outcast 8S, CNC- machined from 6061-T6 aluminum. More torsion-resistant than the standard plastic parts and with an exchangeable plastic bushing for the wishbone pin.(Direct replacement for original set ARA330589)Contents:2 pieces
Genuine GPM spare/option part. GPM rear lower aluminum a-arms for Arrma Kraton / Outcast 8S, CNC- machined from 6061-T6 aluminum. More torsion-resistant than the standard plastic parts and with an exchangeable plastic bushing for the wishbone pin.Comes complete with outer wishbone pins (replaces original sets ARA330590 and ARA330564).Contents:2 pieces
Genuine GPM spare/option part. Closed wheel nuts made of 6061T6 aluminum from GPM, suitable for Arrma Kraton/Outcast 8S.Secure hold of the rim due to large flange with 34 mm diameter and serrated surface.Wrench size: 24 mmThread size: M18x1,0Thread depth: 9 mmContents:4 pieces
Genuine GPM spare/option part. Front spindles from GPM for Arrma Kraton / Outcast 8S, machined from 6061 aluminum. Extremely torsion-resistant and robust.Contents:2 pieces
Genuine GPM spare/option part. These GPM shocks are basically the same as the piggyback version, just without the piggyback. This allows for a more budget-friendly price.Shocks come in pairs including all-metal lower ball joints, spring perches and two pairs of springs with 2.6 mm and 2.8 mm wire diameter. Reinforced shock shafts with 6 mm diameter.Fits Arrma Kraton 8S rear as well as Outcast 8S front and rear applications!Length extended/compressed (center-to-center of mounting points): approx. 190 mm/131 mm.Contents:2 pieces
Genuine GPM spare/option part. Same effect as Arrma option part ARA320615, but for a fracture of the price!Contents:1 piece
Genuine GPM spare/option part. GPM chassis struts front / middle / rear for Arrma Outcast 8S version 2 (chassis struts), one-piece design for greater rigidity, without screwed-on plastic heads.(Replaces original struts ARA320550 / ARA320560/ ARA320595/ ARA320596 with heads ARA320477)Contents:1 set
Genuine GPM spare/option part. GPM steering assembly for Arrma Kraton / Outcast 8S, CNC- machined from 6061-T6 aluminum and with 8 ball bearings. More torsion-resistant, less slack and friction than with the standard plastic parts.The scope of delivery includes replacements for original parts ARA320474, ARA340153, ARA340160 as well as ball bearings and screws.The standard steering posts ARA340159 will be re-used!Contents:1 set
Genuine GPM spare/option part. GPM front shock tower for Arrma Kraton 8S, CNC- machined from 6061-T6 aluminum. More torsion-resistant than the standard plastic parts.The scope of delivery also includes the necessary screws!Direct replacement for original part ARA320475.Contents:2 pieces
Genuine GPM spare/option part. Milled 6061T6 aluminum additional heat sink from GPM with larger 12 volt fan (60 x 60 x 15 mm) for Arrma Kraton / Outcast 8S. The additional heat sink also serves as an adapter plate to mount the larger fan on the original heat sink. A machined contact guard for the intake side of the fan is also included.The fan is connected to the EC5 connector of a 3S or 4S drive battery using an adapter cable (included). Thus, the operating current does not have to be provided by the ESC's BEC.The overall height of the unit, measured from the bottom of the additional heat sink is about 30 mm.Contents:1 set
Customers also viewed
Genuine ARRMA spare/option part. Contents:2 pieces
BUILD YOUR OWN ORIGINAL,AUTHENTIC HPI BAJA 5BHPI large scale fans, we have heard you! The one and only original HPI Baja 5B is BACK and ready for you to build from the ground up! The HPI SBK collection of Self Build Kits grows with the addition of not just one, but TWO 1/5th scale HPI kits! Fans of large scale off-road RC will be super excited to build their own gas-powered 1/5th scale Buggy with the HPI Baja 5B Self Build Kit!When the HPI Baja 5B buggy was first introduced, large scale RC was very expensive and quite difficult for the average RC hobbyist to experience. Using highly durable parts and innovative design features, HPI brought large scale off-road to new enthusiasts and ushered in a new, BIGGER era of RC!Now, YOU can build and own the legend! Experience the thrill and excitement of building a car which ends up being over 80cm (nearly 32 inches) long and weighing nearly 10kg (over 21 lb)! Just install your own engine and electronics as you build the HPI Baja 5B and you'll be ready for any adventure that comes your way!With extra-tough drivetrain parts like the viscous torque differential, super-durable composite spur gear with internal damping and all-metal drivetrain, the HPI Baja 5B is ready for your 23-32cc 2-stroke engine so you can experience the joy of gas-powered RC and up to 30-minute runtimes!The HPI Baja 5B is also equipped with extra-big and super-tough suspension parts, featuring awesome HPI durability! With its expertly designed molded composite suspension plus extra-long adjustable HD shocks, and massive high impact nylon 3-piece beadlock wheels, the Baja 5B is ready for full-speed racing on any off-road circuit!The 4mm thick 6061 aluminum monocoque chassis gives the HPI Baja 5B the classic desert racing buggy look. Precisely bent into shape for maximum strength, the chassis provides the mounting points for the engine and suspension, forming the backbone of the car. Precise steering is provided by a dual-bellcrank rack and cam-type servo saver. Aluminum parts are anodized in cool gunmetal and the classic Baja desert racer clear polycarbonate body is included in the SBK kit, ready for your custom racing scheme!The Baja 5B SBK is a great addition to your HPI collection, as well as a fabulous introduction to large scale buggies!RACING CHASSIS DESIGN & LAYOUTThe narrow channel chassis made from rigid 4mm 6061 aircraft aluminum and gives the HPI Baja 5B a classic desert racing buggy look and extreme stiffness and durability. The U-shaped chassis is protected at the rear with a thick plastic skid plate for extra protection to the motor and drivetrain.The tube roll cage is made of high impact nylon and topped with a real aluminum roof to carry on the classic looks. The roll cage is fully functional and protects the motor and internals from crash damage. The roll cage, radio box, body panels, wing, undertray and gear case are all mounted with fast access clips for easy maintenance. To finish you need: Engine with clutch and exhaust Remote control with servos and receiver battery Charger Two cans of Lexan paint Features Summary Unassembled 1/5th scale electric-powered Off-Road Buggy Ready for your 6S or 8S LiPo electronics Streamlined HPI Baja 5B Flux body design Adjustable motor mount Adjustable HD shock absorbers Monocoque chassis Low CG for superior handling Long travel suspension Viscous torque oil-filled gear differential All-terrain tires Beadlock wheels with metal insert hubs Aluminum rear shock tower Hard plastic skid plates Adjustable rear wing Quick access to all critical maintenance points Dual bellcrank steering Cam type servo saver Hex socket hardware Gunmetal anodizing Full set of rubber-sealed ball bearings Enclosed receiver box Chassis Specifications Overall Length 817mm Height: 255mm Width: Front - 460mm; Rear - 480mm Tire Track (to center of tires): Front - 395mm; Rear - 400mm Wheelbase: 570mm Ride Height: 76mm Suspension Travel: Front - 95mm; Rear - 100mm Weight: 9.6kg (21.3lb) Adjustable Camber: front - shims; rear - screw Front caster: adjustable with shim 22 / 25.5* / 29 degrees (* stock) Toe-in: Front adjustable with tie rod; Rear adjustable with inserts 0-4 degrees (3 degrees stock set-up) Aircraft aluminum 6061 T6 monocoque chassis Double wishbone suspension with adjustable roll center F/R Drive system: HD metal gears with sealed gear box (8.382:1 gear ratio) Differential: viscous torque control with 4 pinion gears; sealed diff case with silicone oil Shock absorber: HD Aluminum coilover shock absorber with fully adjustable preload collar Wheel type: 3-piece beadlock design, high impact nylon material with inset heavy-duty metal hex hub
This model is fitted with numerous aluminium parts: front and rear side bulkheads, rockers, engine mount, suspension arm ends...Steel made Uniball sockets all possible enable all adjustments of the front and rear suspensions.The transmission made with a gearwheell drive offers outstanding reliability and smooth operation.Just like all other FG Competition models the FG Formula 1 Competition is the most successful model of the past years. The experiences we gained from numerous competitions have all influenced this version. The FG gearwheel drive which is extremely smooth running and cares for more power reserves. Surely FG Modellsport has created a competitive model for the next years with this version which will seamlessly follow up on the past successes. Highlights Alloy wishbones FG gearwheel drive Alloy rear axle plate FG alloy shock absorbers 04 Ball-bearing alloy servo saver 26 ccm Zenoah-Engine Airbox Tuned pipe Front- and rear brake 5 mm Chassis Lexan body shell Technical description of the FG Formula 1 Competition ki:The undercarriage of the FG Formula 1 Competition is built on an 5mm alloy chassis. All screws at the bottom of the chassis are countersunk.Front and rear axle mounts as well as the engine unit are connected over the complete length of the chassis, therefore we achieved almost the stiffness of a monocoque chassis. The quick fix system of the engine makes a fast changing of the engine possible. The drive to the rear axle is carried out over several easy-running front gearwheels and an FG ball drive at the rear axle. A separate flange bearing holds the clutch bell in order to relieve the crankshaft. Front and rear axle with their various adjusting possibilities as king pin angle, castor a.s.o. consist of alloy delta wishbones below. Solid alloy rear axle plates reduce the wear at the rear axle and give an enormous driving stability. 4 oil-pressure shock absorbers controlled by a pushrod suspension as well as stabilizers guarantee an optimal ground contact.We deliver the chassis selectively with tuning bowden cable brakes for front or respectively rear axle. The model is powered by a high-capacity 26 cm³ engine with airbox and Tuning pipe.Equipment of the FG Formula 1 Competition kitCNC-cut 5mm alloy chassis with lateral carbon fiber inserts, 26 cm³ engine, inlet silencer, Tuning pipe, FG gearwheel drive, ball drive, complete rear and front axle carrier unit with integrated engine quick-fixing device, double alloy wishbone fastenings, lower alloy delta wishbones at front and rear axle, front and rear alloy uprights, ball-bearing servo saver, steering stops, pushrods, 4 oil-pressure shock absorbers with alloy damper pistons, mechanical Tuning brakes at front and rear, stabilizer for front and rear axle, 10mm alloy balls, rear spoiler, polycarbonate body shell, polyamide front spoiler, receiver box, competition tires with tire inserts.We deliver the models as a kit including mounting instruction. The body parts are made of clear polycarbonate for your own painting. FG stickers and writings are enclosed.For the final assembly of the models you need further: radio control system (transmitter, receiver), 1 large steering servos (each approx. 40 - 50 kg), 2 servo for throttle brake (approx. 20 - 30 kg), batteries and charger.These parts are not included and must be supplied or ordered separately when the rc installation option is selected! Includet Zenoah 26cc engine Clear bodyshell and polycarbonate spoiler Mechanical brakesDimensions Length: 960mm Width: 440mm Height: 230mm Wheelbase: 620mm Formular 1 models in action!
Genuine GPM spare/option part. GPM front lower aluminum a-arms for Arrma Kraton / Outcast 8S, CNC- machined from 6061-T6 aluminum. More torsion-resistant than the standard plastic parts and with an exchangeable plastic bushing for the wishbone pin.(Direct replacement for original set ARA330589)Contents:2 pieces