AKX181F/RS GPM CVD drive shafts for Arrma Kraton / Outcast 8S

€59.90*

Available

Product number: gpm_akx181f_rs

EAN: 4058575131946

Product information "AKX181F/RS GPM CVD drive shafts for Arrma Kraton / Outcast 8S"

Genuine GPM spare/option part.

GPM CVD drive shafts for Arrma Kraton / Outcast 8S, completely made of hardened steel; fits front and rear.

These are complete drive shafts, including wheel shafts and CVD center parts. (Replaces original sets 2x ARA310926, 1x ARA310932 and 1x ARA310933)

Contents:

2 pieces

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

Display reviews in current language only.

No reviews found. Share your insights with others.

Similar products

AKX005 GPM Closed wheel nuts for Arrma Kraton/Outcast 8S

Genuine GPM spare/option part. Closed wheel nuts made of 6061T6 aluminum from GPM, suitable for Arrma Kraton/Outcast 8S.Secure hold of the rim due to large flange with 34 mm diameter and serrated surface.Wrench size: 24 mmThread size: M18x1,0Thread depth: 9 mmContents:4 pieces

€19.90*

AKX055 GPM front lower aluminum a-arms for Arrma Kraton / Outcast 8S

Genuine GPM spare/option part. GPM front lower aluminum a-arms for Arrma Kraton / Outcast 8S, CNC- machined from 6061-T6 aluminum. More torsion-resistant than the standard plastic parts and with an exchangeable plastic bushing for the wishbone pin.(Direct replacement for original set ARA330589)Contents:2 pieces

€59.90*

AKX056 GPM rear lower aluminum a-arms for Arrma Kraton / Outcast 8S

Genuine GPM spare/option part. GPM rear lower aluminum a-arms for Arrma Kraton / Outcast 8S, CNC- machined from 6061-T6 aluminum. More torsion-resistant than the standard plastic parts and with an exchangeable plastic bushing for the wishbone pin.Comes complete with outer wishbone pins (replaces original sets ARA330590 and ARA330564).Contents:2 pieces

€59.90*

AKX054 GPM aluminum a-arms front upper for Arrma Kraton / Outcast 8S

Genuine GPM spare/option part. GPM front upper aluminum a-arms for Arrma Kraton / Outcast 8S, CNC- machined from 6061-T6 aluminum. More torsion-resistant than the standard plastic parts and with an exchangeable plastic bushings for the wishbone pin.Comes complete with wishbone pins (direct replacement for original sets ARA330561 and ARA330564).Contents:2 pieces

€39.90*

AKX040 GPM Aluminum wheelie bar with wing mount for Arrma Kraton / Outcast 8S

Genuine GPM spare/option part. Milled 6061T6 aluminum wheelie bar with wing mount for Arrma Kraton / Outcast 8S.Significantly stronger than the stock part, it also offers an adjustment option for the angle of the wing.Double ball bearing 55 mm diameter wheels made of Delrin with replaceable O-rings as "tread".Contents:1 set

€84.90*

AKX025F GPM front chassis strut for Arrma Kraton / Outcast 8S

Genuine GPM spare/option part. GPM chassis strut front for Arrma Kraton (version 1 and 2) / Outcast 8S, one-piece design for greater rigidity, without screwed-on plastic heads.(Replaces original strut ARA320550 with heads ARA320477).Contents:1 piece

€24.90*

AKX038 GPM center gear box for Arrma Kraton / Outcast 8S

Genuine GPM spare/option part. GPM center gear box for Arrma Kraton / Outcast 8S, CNC- machined from 6061-T6 aluminum. More torsion-resistant than the standard plastic parts, with a more secure fit for the ball bearings and constant backlash even under high loads.(Direct replacement for original set ARA310930)Contents:1 set

€129.90*

AKX030 GPM rear shock tower for Arrma Kraton / front and rear Outcast 8S

Genuine GPM spare/option part. GPM rear shock tower for Arrma Kraton / front and rear Outcast 8S, CNC- machined from 6061-T6 aluminum. More torsion-resistant than the standard plastic parts.The scope of delivery also includes the necessary screws!Direct replacement for original part ARA320476.Contents:1 piece

€49.90*

AKX162 GPM all-metal steering rods for Arrma Kraton / Outcast 8S

Genuine GPM spare/option part. All-metal steering rods from GPM made of 6061T6 aluminum and stainless steel for Arrma Kraton / Outcast 8S. Thanks to clamping device on the ball cups, no lock nuts are required.Contents:1 set

€39.90*

AKX160S/SH GPM steering rods / camber rods for Arrma Kraton / Outcast 8S

Genuine GPM spare/option part. GPM steering rods / camber rods for Arrma Kraton / Outcast 8S made of stainless steel. (Replaces 2x original set ARA340156)Contents:4 pieces

€27.90*

MAKX024N GPM Aluminum servo saver with spring, 25T, with servo adapter frame, Arrma Kraton / Outcast 8S

Genuine GPM spare/option part. Servo saver machined from 7075 T6 aluminum by GPM for Kraton / Outcast 8S. Much stronger than the stock plastic part.Fits servos with 25T spline shaft.Comes with a 6061 aluminum adapter frame for installation of a small steering servo (40/20/20 size).Note: due to the replacement of standard servo, the center point of servo is slightly offset, so the length of the servo linkage needs to be adjusted.Contents:1 set

€44.90*

AKX022 GPM rear uprights for Arrma Kraton / Outcast 8S

Genuine GPM spare/option part. GPM rear uprights for Arrma Kraton / Outcast 8S, CNC machined from 6061-T6 aluminum. More torsion-resistant than the standard plastic parts and with a more secure fit for the ball bearings.Comes complete with wishbone pins and screws (directly replaces original sets ARA330565, ARA330564 and ARA723430)Contents:2 pieces

€64.90*

Customers also viewed

Carburetor Walbro WT 1107 with choke normal/ball-raced

Walbro Vergaser WT1107 with choke Standard carburetor for Zenoah G320. Typ: Walbro WT1107This is the stock carburetor used for the G320RC engine, and will also work on all Zenoah, Chung Yang (CY), Losi, HPI und PT (Smartech/Carson) engines from 23 cm³ up to over 30 cm³. Dimensions:Bore: 15,88 mmVenturi: 13,5 mmIndependent tunable high and low speed jets.The carburetor fits all Zenoah, Chung Yang (CY), Losi, HPI und PT (Smartech/Carson) engines from 23 cm³ up to over 30 cm³.

€69.90*

Configure now

500304032/E Carson 1:5 Wild GP Attack Brushless 2.4GHz RTR, 160A / 700kV / up to 8S

The Carson Wild E Attack is basically the same as the GP version, but instead of the gas engine, a brushless drive unit provides propulsion. In addition to the other motorization, a different receiver box which also carries the drive battery well protected is used.The car comes with completely installed Carson 2.4 GHz remote control, incl. transmitter alkalines, brushless motor with ESC and 35 kg steering servo, as well as a tool set.Motor and esc both allow the use of batteries up to 8S. However, we recommend 6S, as there is a very good compromise between driving performance and run time. One should not forget that the motors performance with 6S is already significantly higher than that of the gas-powered version and that much power needs to be mastered in a comparatively lightweight 2WD car. Motorization Spektrum 160A ESC 56112/700 TT Monster Brushless Motor 700kV Technical details: Up to 80 km/h depending on the battery Differential with steel gears Aluminium shocks, dust protected Bead-lock rims with off-road tires Aluminium wheel hex drives Ajustable rear wing Completely ballraced 2WD drivetrain Water protected receiver box Aluminium chassis Driving batteries and a charger are still required for driving

€999.99* €1,142.00* (12.44% saved)

ARA310937 ARRMA Assembled Diff Set F/R for Kraton / Outcast 8S

Genuine ARRMA spare/option part. Contents:1 pieces

€134.99*

Details

MAKX187R GPM shocks for Arrma Kraton / Outcast 8S, f/r

Genuine GPM spare/option part. These GPM shocks are basically the same as the piggyback version, just without the piggyback. This allows for a more budget-friendly price.Shocks come in pairs including all-metal lower ball joints, spring perches and two pairs of springs with 2.6 mm and 2.8 mm wire diameter. Reinforced shock shafts with 6 mm diameter.Fits Arrma Kraton 8S rear as well as Outcast 8S front and rear applications!Length extended/compressed (center-to-center of mounting points): approx. 190 mm/131 mm.Contents:2 pieces

€69.90*

ARA340183 ARRMA HD Servo Saver Spring Set Kraton 8S EXB

Genuine ARRMA spare/option part. This Heavy Duty Servo Saver Spring Set provides ideal parts for your ARRMA vehicleFeaturesConstructed from strong and durable spring steel for long-lasting performance - Precision manufactured for consistent operation in extreme conditions - Includes servo saver, inner and outer springs - Springs are 13% stiffer than #ARA340168Contents:1 piece

€11.99*

ARA320596 ARRMA Chassis Brace Bar 209mm for Outcast 8S

Genuine ARRMA spare/option part. Contents:1 pieces

€14.99*