Skip to main content Skip to search Skip to main navigation
EXTRA 20% off Outlet*. Use Code: EXTRA20 at checkout!!
+49 2151 820200 Mon-Fri 9 am - 6 pm, Sa 9 am - 1 pm

6250/05 FG Front tuning disk brake for 1:6 Off-Road models - set

Product information "6250/05 FG Front tuning disk brake for 1:6 Off-Road models - set"

Tuning disk brake for front axle. Suitable for Marder and Beetle.

With the tuning disk brake you get a higher brake action.

0 of 0 reviews

Average rating of 0 out of 5 stars

Leave a review!

Share your experiences with other customers.


Accessories / Spare parts

Average rating of 0 out of 5 stars

y1337 Epoxy P-R-M Race brake discs for FG / Smartech / Carson
Top quality epoxy P-R-M Race brake discs with 10 dirt slots for removing dirt and abrasion, which will be transferred to the outside by the discs rotation. The epoxy P-R-M Race brake disc provides an optimal deceleration of the car without the unwanted fading (poor braking performance due to increased heat buildup)! The best braking action when using the epoxy P-R-M Race brake disc is achieved by the combination of the epoxy brake discs and steel brake pads (8456 or y19218). The epoxy P-R-M Race brake discs fit mechanical front and rear brakes on FG / Smartech / Carson cars with brake pads 8456 recommended for these applications.1 pair (2 pieces) Dimensions: Outer diameter: 60 mm Thickness: 2 mmsocket for 18 mm square wheel drive

€22.90*

Average rating of 0 out of 5 stars

8457/03 FG Competition brake lining glued for FG and HPI disc brakes
Genuine FG spare/option part. New competition brake lining with good braking characteristics and low wear. Glued on a steel plate.Spare part for: 6250/05, 6250/06, 8450/05, 8452/05, 10452, 10453 and y0056 HT - Baja 5B/SS premium front disk brake.Measures:Length approx. 50 mmWidth approx. 10 mmThickness approx. 5.5 mmMounting hole distance 40 mmContents:4 pieces

€44.50*

Average rating of 0 out of 5 stars

6020 FG Collet 2,1 mm
Genuine FG spare/option part. Necessary for all throttle and brake linkages.Dimensions:Outer diameter: 7 mmWidth: 5 mmContents:5 pieces

€5.95*

Average rating of 0 out of 5 stars

6107 FG Wheel square 9,5mm/M6
Genuine FG spare/option part. Square wheel driver in high-strength alloy material with M6 fixing thread. Essentially higher retention force. Suitable for all models.Dimensions:Square: 9,5 mm Width: 17 mmBore: 8 mmContent:1 pieces:

€16.90*

Average rating of 0 out of 5 stars

6730/05 FG Allen Grub screw M5x5 mm, 15 Stück
Genuine FG spare/option part.Part is delivered in silver or black color from vendor!Content:15 pieces

€3.40*

Average rating of 0 out of 5 stars

6738/03 FG Self-locking hexagon nut M3, 15 pcs.
Genuine FG spare/option part.Part is delivered in silver or black color from vendor!Content:15 pieces

€2.80*

Average rating of 0 out of 5 stars

8093 FG Brake cable bracket - 1pce.
Spare part for , , , , and .

€5.50*

Average rating of 0 out of 5 stars

8448 FG Stud bolt for brake lining - 4pcs.
Stud bolt with double sided thread for well-running brake linings, no jamming of the brake linings possible. Suitable for all mechanical disk brakes.

€13.90*

Average rating of 0 out of 5 stars

8455 FG Alloy brake caliper for front disk brake - 1pce.
Spare part for , , , , , , , , , , and .

€27.90*

Average rating of 0 out of 5 stars

8458/02 FG Tuning Brake disk lasered
Spare part for , , , , and .Diameter 60 mm18 mm squareContent:2 pieces

€45.90*

Average rating of 0 out of 5 stars

8459/01 FG Brake shaft - 2pcs.
Spare part for , , , , , , , , , , and .

€27.90*

Average rating of 0 out of 5 stars

8461 FG Brake lever and servo rods - 2pcs.
Spare part for , , , , , , , , , , and .

€6.30*

Average rating of 0 out of 5 stars

8461/01 FG Brake lever for disk brake front/rear - 2 pcs.
Spare part for , , , , and .

€8.90*

Average rating of 0 out of 5 stars

8462/05 FG Balance
Genuine FG spare/option part. Spare part for:6250/016250/026250/056250/068450/018450/0584528452/0510450104511045210453Content:2 pieces

€6.90*

Average rating of 0 out of 5 stars

8464/01 FG Bowden cable flexible for front disk brake - 1pce.
Cable: 305 mmSheath: 220 mmSpare part for , , , , and .

€18.90*

Average rating of 0 out of 5 stars

8465 FG Collet set
Genuine FG spare/option part.Dimensions:Inner diameter: 2 mmCollet outer diameter: 7 mm x width 5 mmOuterdiameter: 5 mm x width 8 mmContents:4 pieces

€8.50*

Average rating of 0 out of 5 stars

8466 FG Front axle 65 mm
Genuine FG spare/option part. Dimensions:Length: 65 mmThread length: approx. 12 mmLength from thread to clip: approx. 47 mmSpace between clips: approx. 4 mmDiameter: 8 mmContents:1 piece

€13.90*

Average rating of 0 out of 5 stars

8468 FG Screw set for disk brake front/rear
Genuine FG spare/option part. Spare part for 6250/01, 6250/02, 6250/05, 6250/06, 8450/01, 8450/05, 8452, 8452/05, 10450, 10451, 10452 and 10453. Contents:1 set

€4.30*

Average rating of 0 out of 5 stars

8469 FG Guiding plate ball-beared
Alloy guiding plate for brake disk, ball beared.Substitute for , , , , and .Content:2 pieces

€39.80*

Average rating of 0 out of 5 stars

8469/01 FG Ball bearing flange for guiding plate
Genuine FG spare/option part.Spare part for , , , , and .Dimensions:Outer diameter 5 mmInner diameter 8 mmWidth 2.5 mmContent:2 pieces

€17.90*

Average rating of 0 out of 5 stars

8474/06, FG Alloy bowden cable holder long new, 2 pcs.
Revised alloy bowden cable holder long with longer brake lever distance according to the sinking of the pressure spring.Hole center distance 19 mm

€23.90*

Average rating of 0 out of 5 stars

8479 FG Steel bush for brake caliper - 2pcs.
Hardened steel bushes for all caliper of the front and rear disk brakes. In combination with a ball-beared guide plate optimal position of the brake eccentric.Substitute for , , , , and .

€7.90*

Customers also bought

Average rating of 0 out of 5 stars

6135 FG Engine mount large Zenoah/Marder 2WD
Genuine FG spare/option part.Fits all FG off road cars except Leopard and Leopard race.Contents:1 piece

€15.90*

Average rating of 0 out of 5 stars

6431 FG Steel pinion 16 teeth
Genuine FG spare/option part.For combination with 48T main and differential spur gear.Diameter: 26.7 mmBore: 10 mmTotal width: 16 mmTooth width: 9.5 mmModule: m=1,5Contents:1 piece

€26.90*

Average rating of 0 out of 5 stars

6071 FG Alloy rear axle brace
Genuine FG spare/option part. Suitable for all FG models except Formula 1 and Evo. Mounting holes for 4 mm bolts.Contents:1 piece

€17.90*

Similar products

Average rating of 0 out of 5 stars

8450/01 FG Front disk brake for 1:5, 1:6, Off-Road Buggy 2WD, all 4WD - set
Low priced retrofitable front axle disk brake for all FG 1:5, 1:6, Off-Road 2WD and all 4WD models. also suitable for the 2-damper front axle and the Mono-Shock axle. The disk brake prevents a breaking-out of the rear, has a very sensitive adjustment and is optically very effective. You are able to run this disk brake with the gas servo, but make sure the servo has a minimum regulating power of 6kg. We deliver the disk brake without uprights. Link to the part scout!Content 6020 8093 6105/05 8455 8457/02 8458 8459/01 8461 8461/01 8462/01 8462/02 8462/06 8462/07 8462/05 8463 8464/01 8465

€112.95*

Average rating of 0 out of 5 stars

8452 FG Rear disk brake - set
Low-priced retrofitable disk brake for the rear wheels. Suitable for all 1:5 and 1:6 models and Race-Trucks. In connection with the front disk brake very high brake power, optically very effective. We recommend to steer over 2 servos if you install the front and rear disk brake. We deliver the disk brake without uprughts.Contents:1 piece

€122.50*

Average rating of 0 out of 5 stars

6250/07 FG Front tuning disk brake for Monster-Truck - set
Tuning disk brake for front axle. Suitable for Monster-Truck, Monster Beetle Pro and Stadium-Truck. With the tuning disk brake you get improved braking preformance.This tuning version includes ultra flex brake cables, alloy cable mounts, ballraced alloy cam guide plates, stud bolts, competition brake pads and rotors.

€130.50*

Average rating of 0 out of 5 stars

y1075 Front brake system for FG Marder, FG Off-Road Buggy and for Carson / Smartech 2WD offroad cars incl. uprights, bearings and axles
Complete pre-assembled set front disc brakes for FG Marder, FG Off-Road Buggy and for Carson / Smartech Attack / Comanche / UNO / Monster Truck / CRT / CPT / Super Attack / Evo Attack / Spider / Big Attack , fits Conrad Big Pyro as well.For mounting in a Gas Blaster you must change you front shock mount and the front body shell holder, look at the pictures. Includes:- brake system with linkage- uprights- bearings- longer axle shafts- wider square drivesNo additional parts needed.

€179.90*

Average rating of 0 out of 5 stars

8452/05 FG Rear tuning disk brake for 1:5 FG Evo Trucks and 1:6 Off-Road
Genuine FG spare/option part. The rear disk brake is suitable for 1:5 models, Race-Trucks, the current version from Evo, 1:6 Off-Road and Monster models. The disk brakes prevent a breaking-out of the rear, have a very sensitive adjustment and are optically very effective. You can run the front disk brake with the gas servo, but make sure the servo has a minimun regulating power of six kilograms. We recommend to steer over two servos if you install front and rear disk brake. We deliver the disk brakes without uprights. In combination with the rim 6105/01 also suitable for Marder, Beetle and Pajero.Additional equipment for front and rear tuning disk brake:8472/01 Flexible bowden cables8474/05 Alloy bowden cable holder8469 Alloy guiding plate with ball bearing8479 Steel bush8448 Stud bolt for brake lining8458/02 Lasered tuning disk brake8457/03 Competition brake lining

€169.95*

Average rating of 0 out of 5 stars

6250/03 FG Front disk brake for Monster-Truck - set
Front disc brake hop-up for monster and stadium models with dual shock front axle. Significantly improved braking preformance without rear axle lock-up.Attention!!Can only be installed in connection with the alloy uprights .

€99.50*

Average rating of 0 out of 5 stars

6250/02 FG Front disk brake for Leopard/Pajero
Genuine FG spare/option part. Front disc brake hop-up for Leopard and Pajero.Contents:1 set

€107.90*

Average rating of 0 out of 5 stars

8452/06 FG Rear tuning disk brake for 1:5 Trucks and 1:6 Off-Road
Genuine FG spare/option part. The rear disk brake is suitable for 1:5 models, Race-Trucks, the current version from Evo, 1:6 Off-Road and Monster models. The disk brakes prevent a breaking-out of the rear, have a very sensitive adjustment and are optically very effective. You can run the front disk brake with the gas servo, but make sure the servo has a minimun regulating power of six kilograms. We recommend to steer over two servos if you install front and rear disk brake. We deliver the disk brakes without uprights. In combination with the rim 6105/01 also suitable for Marder, Beetle and Pajero.Additional equipment for front and rear tuning disk brake:8472/01 Flexible bowden cables8474/05 Alloy bowden cable holder8469 Alloy guiding plate with ball bearing8479 Steel bush8448 Stud bolt for brake lining8458/02 Lasered tuning disk brake8457/03 Competition brake lining

€169.95*

Average rating of 0 out of 5 stars

6250/08, FG Conversion kit to Tuning disk brake f./r., set
Conversion kits to convert a front or rear disk brake to a Tuning disk brake for front or rear axle.Kit 06250/08 fits all rims from Ø100mm.Kit 08450/08 fits all rims up to Ø90mm.

€99.90*

Customers also viewed

Average rating of 0 out of 5 stars

9541 FG Hydraulic brake for front axle
Genuine FG spare/option part. Content:1 set

€384.95*

Average rating of 0 out of 5 stars

6154 FG Body Marder/Zenoah polycarbonate, clear
Genuine FG spare/option part. Body shell is delivered clear and without window gitter or decal set.Dimensions:Length: 580 mmWidth: 240 mmHeight: 205 mmContents:1 piece

€118.90*

Average rating of 0 out of 5 stars

7040/01 FG Alloy brake caliper 97
Genuine FG spare/option part. For gear plates 7039/1 oder 7474. Only for use with single brake disc on the layshaft.Contents:1 piece

€37.00*

Average rating of 0 out of 5 stars

8452/05 FG Rear tuning disk brake for 1:5 FG Evo Trucks and 1:6 Off-Road
Genuine FG spare/option part. The rear disk brake is suitable for 1:5 models, Race-Trucks, the current version from Evo, 1:6 Off-Road and Monster models. The disk brakes prevent a breaking-out of the rear, have a very sensitive adjustment and are optically very effective. You can run the front disk brake with the gas servo, but make sure the servo has a minimun regulating power of six kilograms. We recommend to steer over two servos if you install front and rear disk brake. We deliver the disk brakes without uprights. In combination with the rim 6105/01 also suitable for Marder, Beetle and Pajero.Additional equipment for front and rear tuning disk brake:8472/01 Flexible bowden cables8474/05 Alloy bowden cable holder8469 Alloy guiding plate with ball bearing8479 Steel bush8448 Stud bolt for brake lining8458/02 Lasered tuning disk brake8457/03 Competition brake lining

€169.95*

Average rating of 0 out of 5 stars

y1312 Twin hose bracket
Twin hose bracket for hoses up to 7 mm outer diameter. With 5 mm hole for installation by screw or cable tie.Keeps your car's fuel lines in place. Especially helpfull with tuned pipe layouts running close to the engine.Screws with part number #6726/25 are recommended for installation on the fan cover.

From €14.90*

Average rating of 0 out of 5 stars

8452/06 FG Rear tuning disk brake for 1:5 Trucks and 1:6 Off-Road
Genuine FG spare/option part. The rear disk brake is suitable for 1:5 models, Race-Trucks, the current version from Evo, 1:6 Off-Road and Monster models. The disk brakes prevent a breaking-out of the rear, have a very sensitive adjustment and are optically very effective. You can run the front disk brake with the gas servo, but make sure the servo has a minimun regulating power of six kilograms. We recommend to steer over two servos if you install front and rear disk brake. We deliver the disk brakes without uprights. In combination with the rim 6105/01 also suitable for Marder, Beetle and Pajero.Additional equipment for front and rear tuning disk brake:8472/01 Flexible bowden cables8474/05 Alloy bowden cable holder8469 Alloy guiding plate with ball bearing8479 Steel bush8448 Stud bolt for brake lining8458/02 Lasered tuning disk brake8457/03 Competition brake lining

€169.95*

Average rating of 0 out of 5 stars

160323 HPI Baja 5B SBK build kit Gas-powered without Motor and RTR
BUILD YOUR OWN ORIGINAL,AUTHENTIC HPI BAJA 5BHPI large scale fans, we have heard you! The one and only original HPI Baja 5B is BACK and ready for you to build from the ground up! The HPI SBK collection of Self Build Kits grows with the addition of not just one, but TWO 1/5th scale HPI kits! Fans of large scale off-road RC will be super excited to build their own gas-powered 1/5th scale Buggy with the HPI Baja 5B Self Build Kit!When the HPI Baja 5B buggy was first introduced, large scale RC was very expensive and quite difficult for the average RC hobbyist to experience. Using highly durable parts and innovative design features, HPI brought large scale off-road to new enthusiasts and ushered in a new, BIGGER era of RC!Now, YOU can build and own the legend! Experience the thrill and excitement of building a car which ends up being over 80cm (nearly 32 inches) long and weighing nearly 10kg (over 21 lb)! Just install your own engine and electronics as you build the HPI Baja 5B and you'll be ready for any adventure that comes your way!With extra-tough drivetrain parts like the viscous torque differential, super-durable composite spur gear with internal damping and all-metal drivetrain, the HPI Baja 5B is ready for your 23-32cc 2-stroke engine so you can experience the joy of gas-powered RC and up to 30-minute runtimes!The HPI Baja 5B is also equipped with extra-big and super-tough suspension parts, featuring awesome HPI durability! With its expertly designed molded composite suspension plus extra-long adjustable HD shocks, and massive high impact nylon 3-piece beadlock wheels, the Baja 5B is ready for full-speed racing on any off-road circuit!The 4mm thick 6061 aluminum monocoque chassis gives the HPI Baja 5B the classic desert racing buggy look. Precisely bent into shape for maximum strength, the chassis provides the mounting points for the engine and suspension, forming the backbone of the car. Precise steering is provided by a dual-bellcrank rack and cam-type servo saver. Aluminum parts are anodized in cool gunmetal and the classic Baja desert racer clear polycarbonate body is included in the SBK kit, ready for your custom racing scheme!The Baja 5B SBK is a great addition to your HPI collection, as well as a fabulous introduction to large scale buggies!RACING CHASSIS DESIGN & LAYOUTThe narrow channel chassis made from rigid 4mm 6061 aircraft aluminum and gives the HPI Baja 5B a classic desert racing buggy look and extreme stiffness and durability. The U-shaped chassis is protected at the rear with a thick plastic skid plate for extra protection to the motor and drivetrain.The tube roll cage is made of high impact nylon and topped with a real aluminum roof to carry on the classic looks. The roll cage is fully functional and protects the motor and internals from crash damage. The roll cage, radio box, body panels, wing, undertray and gear case are all mounted with fast access clips for easy maintenance. To finish you need: Engine with clutch and exhaust Remote control with servos and receiver battery Charger Two cans of Lexan paint Features Summary Unassembled 1/5th scale Off-Road Buggy Ready for your 23-32cc RC engine Ready for your electronics Enclosed radio box Baja desert racing body design Adjustable HD shock absorbers Monocoque chassis Low CG for superior handling Long travel suspension Viscous torque oil-filled gear differential All-terrain tires Beadlock wheels with metal insert hubs Aluminum rear shock tower Hard plastic skid plates Adjustable rear wing Quick access to all critical maintenance points Dual bellcrank steering Cam type servo saver Race spec Hex socket hardware Gunmetal anodizing Full set of rubber-sealed ball bearings Chassis Specifications Overall Length 817mm Height: 255mm Width: Front - 460mm; Rear - 480mm Tire Track (to center of tires): Front - 395mm; Rear - 400mm Wheelbase: 570mm Ride Height: 76mm Suspension Travel: Front - 95mm; Rear - 100mm Weight: 9.6kg (21.3lb) Adjustable Camber: front - shims; rear - screw Front caster: adjustable with shim 22 / 25.5* / 29 degrees (* stock) Toe-in: Front adjustable with tie rod; Rear adjustable with inserts 0-4 degrees (3 degrees stock set-up) Aircraft aluminum 6061 T6 monocoque chassis Double wishbone suspension with adjustable roll center F/R Drive system: HD metal gears with sealed gear box (8.382:1 gear ratio) Differential: viscous torque control with 4 pinion gears; sealed diff case with silicone oil Shock absorber: HD Aluminum coilover shock absorber with fully adjustable preload collar Wheel type: 3-piece beadlock design, high impact nylon material with inset heavy-duty metal hex hub

€769.00*
Loading...
Upload in progress, please be patient ...
Shopware-Agency Shopware-Theme Development