TT1499 Top Tuning Safety Bag for LiPo batteries
€11.90
% €12.90 (7.75% saved)
Available
Product information "TT1499 Top Tuning Safety Bag for LiPo batteries"
For secure transport and storage of LiPo batteries. For batteries up to approx. 175 x 75 x 70 mm.
Contents:
- 1 piece
Login
Customers also bought
Fully synthetic oil, available in three blends. 1-liter bottle.The optimal 2-stroke oil for 23-30 cm³ engines/cars Motul Racing Oil is available in three different blends: On-Road for high revving onroad cars Off-Road for cars with high torque enginesMixing ratio for 1/5 & 1/6 applications: We recommend a mix with about 4% oil, which means 200 cc of oil to 5 litres of gas (1:25 ratio). With one litre of Motul oil you can mix about 25 litres of optimal fuel for your 1/5 or 1/6 car. That's enough for well over 20 hours of driving fun! Oil / Gas Oil percent Oil per 1 liter of gasoline Oil per 2 liter of gasoline Oil per 3 liter of gasoline Oil per 4 liter of gasoline Oil per 5 liter of gasoline 1:20 5% 50 ml 100 ml 150 ml 200 ml 250 ml 1:25 4% 40 ml 80 ml 120 ml 160 ml 200 ml 1:30 3,33% 33 ml 67 ml 100 ml 134 ml 167 ml 1:33 3% 30 ml 60 ml 90 ml 120 ml 150 ml 1:35 2,86% 29 ml 58 ml 86 ml 115 ml 143 ml 1:40 2,5% 25 ml 50 ml 75 ml 100 ml 125 ml 1:50 2% 20 ml 40 ml 60 ml 80 ml 100 ml
Genuine HT spare/option part. After-Run is a performance enhancing preservation, which ensures that the engine starts properly, even after a long time (winter break) storage. Added to the fuel it keeps the fuel system clean.Among other After-Run conserves the diaphragm of the Walbro carburetor!For long term storage (i.e. during winter!) "vital" for the carburetor diaphragms!For 23 to 32 cm³ engines like Zenoah, Chung Yang, PT, Losi, HPI a.s.o.It binds water in the fuel, particularly important when the engine is not run regularly or after wet races. After-Run improves engine performance, ensures better combustion, removes debris and residues. Simply add the content of the bottle to 5 litres of fuel.Contents:1 piece / 20 ml
Content: 20 Milliliter (€495.00 / 1000 Milliliter)
Typical featuresLow inner resistance with high MPVHigher energy density with lower weightLonger lifecycle under proper usage, up to 200 timesFor LiPo batteries, the peak amp rate is usually twice the continuous crateCan be charged with 5C when time is criticalRecommended charge with 2CConnectors: EC5, XH-balancer. Spezification:Tension: 4S / 14,8VCapacity mAh: 5000Case: HartCable cross section: 12AWG/3,3Length +/- 5 mm: 137 mmWidth +/- 1,5 mm: 46 mmHeight: +/- 1,5 mm: 48 mmWeight +/- 10g: 548gCont. current: 60C (220A)Contents:1 piece
Customers also viewed
Genuine rc-car-online spare/option part. Compatible with up to 8S lithium batteries. In addition to the LiPo Tester, the CellMeter also has a built-in servo tester. This makes it possible to check at any time whether the servos are working properly.Technical data:High visibility LCD displayBalancer functionDischarge functionVery accurate battery checkSuitable for Li-Ion, LiPo, LiFe, LiHv, NiCd, NiMh batteries (up to 8 cells)Battery type and Zellenanzahl will be recognized automaticallyVoltage displayed individually for every cellWeight: 48gDimensions LxWxH: 84 mm x 52 mm x 15 mmContents:1 piece
Genuine HT spare/option part. Helpful tool for removal of clutch shoes, flywheels and many more.FitsZenoah G230/G240/G260/G270/G290/G320Chung-Yang enginesPT enginesLosi enginesHPI enginesThreadsize:M10 x 1Contents:1 piece
Genuine Top Tuningspare/option part. High performance fan as upgrade for various applications in electric models.The size of 40 x 40 x 10 mm can be swapped e.g. for the fans of the FG motor cooling unit or the fans of various speed controllers.The air flow rate is much higher than with the standard units!The operating voltage of the fan with 5 - 8.4 V is perfectly adapted to these requirements. Technical data: Dimensions: 40 x 40 x 10 mm Operating voltage: 5 8.4 V Current: 0.65A Speed: 16,000 rpm @ 8.4 V Air flow: 16.7 cfm Connector: Dupont 2-pin female (compatible with BEC/Futaba/Universal) Cable length: approx. 17 cm Contents:1 piece
Fully synthetic oil, available in three blends. 1-liter bottle.The optimal 2-stroke oil for 23-30 cm³ engines/cars Motul Racing Oil is available in three different blends: On-Road for high revving onroad cars Off-Road for cars with high torque enginesMixing ratio for 1/5 & 1/6 applications: We recommend a mix with about 4% oil, which means 200 cc of oil to 5 litres of gas (1:25 ratio). With one litre of Motul oil you can mix about 25 litres of optimal fuel for your 1/5 or 1/6 car. That's enough for well over 20 hours of driving fun! Oil / Gas Oil percent Oil per 1 liter of gasoline Oil per 2 liter of gasoline Oil per 3 liter of gasoline Oil per 4 liter of gasoline Oil per 5 liter of gasoline 1:20 5% 50 ml 100 ml 150 ml 200 ml 250 ml 1:25 4% 40 ml 80 ml 120 ml 160 ml 200 ml 1:30 3,33% 33 ml 67 ml 100 ml 134 ml 167 ml 1:33 3% 30 ml 60 ml 90 ml 120 ml 150 ml 1:35 2,86% 29 ml 58 ml 86 ml 115 ml 143 ml 1:40 2,5% 25 ml 50 ml 75 ml 100 ml 125 ml 1:50 2% 20 ml 40 ml 60 ml 80 ml 100 ml
Special offer, set includes 2 x 3S LiPo batteries 5000mAh 50C. Normal price 958 €.Pirate Desert Short Course Truck 1:7 4x4 6S Brushless RTRSpecial features:Painted and decorated polycarbonate body.Pre-installed 4-channel radio control system (2+2) 2.4 GHzFail-safe function (automatic switch-off in the event of radio failure).With deactivatable gyro to stabilize the vehicle on slippery surfacesProtective housing for the receiver.LED strip on the roof.Versatile tires for different surfaces, large diameter (140 mm).Front and rear axle differentials with gears in waterproof housings.Front and rear bumpersAll-wheel drive completely on ball bearingsReinforced drive for 6S LiPo supply.Technical data :Headlights/rear lights, indicator140 mm tires with fabric (space-savingDifferential + central bearing made of aluminumAluminum servo saverSteering servo with metal gears (18 kg)XT-90 battery connectorsBLACK aluminum chassisESC 150 Amp (6S)Reinforced wishbonesCentral aluminum reinforcementMulti-adjustable front and rear shock absorber mountsRear cardan shafts made of treated steelBrushless motor in 4274/2000 kV Adjustable aluminum motor mountQuick attachment of the battery pack with a strap4-wheel independent suspensionFront wishbone suspensionHomokinetic cardan shafts at the front made of steelAluminum wheel nutsDimensions :Length : 770mmWidth : 380mmHeight : 270mmWeight : 7400gWheelbase : 415 mmWheel diameter : 140x50 mmAdditional information :Minimum age : 14 yearsRequired accessories:chargerTransmitter batteries (4)Scope of delivery:Assembled short course model including electronics and 2xLiPo AkkuInstruction manual
Reliable water protection for all electronic components.In model making too, WET.PROTECT protects and secures the functionality of precision mechanics and electronics of filigree electrical components and control units.Even out in the field and moisture and soddenness go into every little opening and every ever so narrow gap. With WET.PROTECT , moisture, splash water and rain have no chance to develop their destructive effects. WET.PROTECT protects with a single application against corrosion and moisture for at least one year, even during regular, intensive off-road use.A product, which is able to isolate metals to 100% against any wetness or humidity. Conventional contact sprays emulsify, therefore mix themselves with water, which provides a band aid solution, but no long-lasting operability, let alone real protection.WET.PROTECT goes completely between surface and water and isolates them by a hermetic and long lasting protective film.The conductivity is not impaired in any way, however corrosion and short-circuits are eliminated. Once applied, WET.PROTECT provides protection for up to one year.Technical details:Appearance:slightly brownish liquidOdor:Solvent-likeDensity at 20° C:0.6 kg / liter (canned)Flash point:Not measurable (aerosol)Ignition temperature:>250°CSelf-igniting:not self-ignitingSolubility in water:immiscible, non-emulsifyingLayer thickness:2 3 µmSurface resistance: 28 Terra Ohms (ISO93)Dielectric strength:208 KV/cm (normal case)The product is extremely economical in application. The more the better does not apply!Contents:1 piece / 50 ml
Content: 50 Milliliter (€218.00 / 1000 Milliliter)
Ideal work stand with extra wide tripod up to 100 kg. load capacity with excellent stability, even on uneven (!) urface.Specially made support mechanism, individually adjustable width from 115 mm to 375 mm for most RC cars from 1/10 to 1/5 scale. incline from 0 to 90° Quickly folded and loaded For easy storage, as well as for transport completely foldable! (Carrying bag available!)Height adjustment of the support from 635 mm to 1000 mm and inclination from 0-90° Length of the support surface 386 mm Bis zu 100Kg belastbar! Support mechanism continuosly adjustable in width Due to various adjustment options, the Top Tuning CAR STAND offers the optimal possibilities for making adjustments or maintenance work on the RC car. The load capacity and stability are beyond doubt with a load limit of 100 kg and the extremely stable tripod. The up to 90 ° adjustable slant shows your RC car at events and presentations, as well as in your assembly room to its best advantage! 6.5 kg. weight Pivoting bracket Height adjustable from 69 to 104 cm Basic frame is made of steel, painted or chromed Car bracket is made of aluminum and stainless steel A tool holder TT1030/01 is also available as an accessory in our shop selection.