28 products found for "y0702"

Catalogue #1

y0702 Copper-Exhaust gasket for Zenoah, CY, Fuelie, PT, etc.

Genuine HT spare/option part. For all Zenoah G230/240/260/270/290/320 / CY / Fuelie / PTTemperature and dimensionally stable. Thickness: 1,0 mm.Please note:It is recommended to use a gasket sealer with every gasket on an engine. This gives better sealing anda longer lasting gasket. We also recommend:y0804 HT-flange sealer 518 y0994 Marston sealery0807 MD-Sil RTV silicone sealerContents:1 piece

€4.90*

10702 FG Engine mount Formular 1 electric

Genuine FG spare/option part. Contents:1 piece

€62.95*

y0700/01 Single-sided alloy servoarm, 1 pce.

Item N° y0700/01 Single-sided alloy servoarm, 1 pce.Suitable for all servos with an output shaft with 25 teeth multi-tooth shaft, for example:y2006 Digital Big-Scale Servo D-21HVNearly all Robbe/Futaba servosMega Power servoThunder Tiger DS1015Savöx servosand many more!When you count the teeth of your servo you can check if this alloy arm will fit to your servo. Alloy servoarms are indispensable by strong digital servos, as used on big scale models for example, to optimize the servo forces being transferred.

€8.90*

y0701/01 Single-sided split alloy servoarm

Splitted Alloy servoarm for a more protecting screw connection (with a 2,0 mm allen head screw driver) causing stiffness on the servo output shaft!Suitable for all servos with an output shaft with 25 tooth spline shaft, for example:y2006 Digital Big-Scale Servo D-21HV Nearly all Robbe/Futaba servosMega Power servoThunder Tiger DS1015Savöx servosand many more!holes for linkage with 3 mm diameterWhen you count the teeth of your servo you can check if this alloy arm will fit to your servo. Alloy servoarms are indispensable by strong digital servos, as used on big scale models for example, to optimize the servo forces being transferred.Content:1 piece

€12.90*

y0703 - 1:6 Spoiler, white, 1 pce.

Item-No.: y07031:6 Spoiler, white, 1 pce.Thickness: approximately 3 mmSuitable for most 1/6 FG, Carson, etc. models.

€14.90*

y0700 Double sided alloy servoarm, 1 pce.

Item N° y0700 Double sided alloy servoarm, 1 pce.Suitable for all servos with an output shaft with 25 teeth multi-tooth shaft, for example:y2006 Digital Big-Scale Servo D-21HVNearly all Robbe/Futaba servosMega Power servoThunder Tiger DS1015Savöx servosand many more!When you count the teeth of your servo you can check if this alloy arm will fit to your servo. Alloy servoarms are indispensable by strong digital servos, as used on big scale models for example, to optimize the servo forces being transferred.

€9.90*

y0701 Double sided split alloy servoarm, 1 pce.

Splitted Alloy servoarm for a more protecting screw connection (with a 2,0 mm allen head screw driver) causing stiffness on the servo output shaftSuitable for all servos with an output shaft with 25 tooth spline shaft, for example:y2006 Digital Big-Scale Servo D-21HVNearly all Robbe/Futaba servosMega Power servoThunder Tiger DS1015Savöx servosand many more!holes for linkage with 3 mm diameterWhen you count the teeth of your servo you can check if this alloy arm will fit to your servo. Alloy servoarms are indispensable by strong digital servos, as used on big scale models for example, to optimize the servo forces being transferred.

€14.90*

y0707/01 - Grafil 5B-G front section, 1 pce.

Item-No.: y0707/01Grafil 5B-G front section, 1 pce.

€6.90*

y0707/02 - Grafil 5B-G window masking stickers, 1 pce.

Item-No.: y0707/02Grafil 5B-G window masking stickers, 1 pce.

€3.90*

y0704 Smartech Monster Truck body shell, painted, 1 pce.

Painted body shell with decals.Die Karosserie passt auch auf Carson Comanche, Carson Stadium Racer, Stadium Truck, Bigfoot Race und Pickup Truck. Bei individueller Anpassung natürlich an nahezu allen 1:6er und auch vielen 1:8er RC-Cars!Measures:Wheelbase: 400 mmWith between the wheels: approx. 255 mmWith in the middle: approx. 235 mmWidth: ca. 250 mmTotal length: ca. 630 mmHeight: ca. 180 mm

€119.90*

y0703/01 Original Smartech Uno 1/6 scale rear wing, white

Original spare part for Smartech Uno.1:6 rear wing in white with original Smartech Uno decor.Thickness: approximately 3 mm.Suitable for most 1/6 FG, Smartech, Carson, etc. models.

€14.90*

y0302 Torx screwdriver T25

Genuine HT spare/option part.High quality Torx screwdriver.Contents:1 piece

€11.90*

y0720 rc-car-online Transmitter bag

Genuine HT spare/option part. Extremely sturdy, fully padded transmitter bag! Fits all popular pistol grip transmitters Top quality; with padded adjustable length retaining straps to secure the transmitter, large zippered flap and adjustable carrying strap. Dimensions: Width: 23 cmHeight: 34 cmDepth: 17 cmContents:1 piece

€24.90* €34.90* (28.65% saved)

y0072/01 Rear wing Audi A4

Rear wing for Audi cars, 277 mm total width x 52 mm height. Comes with installation hardware (screws and wing mouns) included.

€36.90*

y0902 Reinforced differential tube for FG buggy differential

Genuine HT spare/option part.Extra strong tube machined from 7075-T6 high grade aluminum with an outerdiameter of 49 mm. This tube is made to solve the problem of destroyed differential tubes in off-road cars, it is several times stronger than the stock version.Contents:1 piece

€34.90*

y0202 HT-Differential ring gear, extreme duty, 41Teeth

Genuine HT spare/option part.Coarse pitch spur gear for the differential, especially for use in off-road and monster models. The teeth are stronger and , due to their bigger size, a little bit more forgiving when the gear mesh is not adjusted correctly.Fits FG cars and Smartech / Carson 2WD cars.Only for use with the extreme duty pinions! Not for use in combination with Elcon rear drivetrain unit or Elcon differential!Module: m=1,75.Contents:1 piece [INCLUDE]profilverschoben[ENDINCLUDE]

€49.90*

y0792 SPEED TEC EXPERT Zenoah G260 tuning engine

The SPEED TEC EXPERT genuine Zenoah G260 engine is optimized for performance with sophisticated craftsmanship and guarantees, besides greatly increased performance, excellent workmanship and stamina. SPEED TEC EXPERT version modifications: Cylinder: Adjustment of compression; enlarged ports, fuel management milled, machined and polished exhaust and intake. Piston: weight reduced; skirt shortened; oil rings, piston above and below piston ring tapered and piston dome ground. Crankshaft: is adjusted and aligned. Flywheel: weight reduced and checked for runout. Gaskets: use of premium quality gaskets.To achieve the optimum performance gain of a SPEED TEC EXPERT engine, we recommend the use of a tuned pipe ( to the tuned pipes ).

€649.00*

y0782/03 burnished M8 steel turnbuckles - 66 / 84 mm

gewinde_0005_02 Length: 66226B 84 mm

Genuine FG spare/option part.Burnished M8/M10 steel turnbuckles.Contents:2 pieces

€17.90*

y0722 Axle plugs for Losi 5ive-T/2.0, Mini

y0722 Quanity: y0722/01 - Set of 4

For sealing the axles on Losi 5ive-T and Mini cars, keeps debris out of the inner screws which secure the retainer pin. Set of 4 or set of 10 to choice.Can be used for Losi 5ive-T, Mini and HPI Baja cars.

€3.90*

y0502 Compressed air spray - flammable - 400 ml, 1 pce.

Compressed air spray for cleaning and dusting your model cars. With the long nozzle tube it is well suited for cleaning hard to reach areas. For example you can get between differential and engine or behind the gear plate without disassembly.

Content: 400 Milliliter (€17.25* / 1000 Milliliter)

€6.90*

y0782 Electrogalvanized M8 steel turnbuckles - all lengths, 2 pcs.

gewinde_0005 Length: 6100/04 40 mm+ 1.2EUR

Electrogalvanized M8 steel turnbuckles right/left available in different lengths.Order no.Length:6100/03M8 left/right36 mm6100/04M8 left/right40 mm7076/01M8 left/right54 mm6076/01M8 left/right61 mmy0988M8 left/right75 mmThe 75 mm version is especially for installation of HT upper rear alloy a-arms in Carson Comanche, Attack Evo, CRT + CPT cars.

Variants from €9.90*

€11.10*

y0002 Bowden cable mount 1/6 and Formula 1, 2 pcs.

€12.60*

y0782/01 Electrogalvanized M8/M10 steel turnbuckles - all lengths, 2 pcs.

gewinde_0005_01 Length: 108 mm, 67267+ 5.4EUR

Electrogalvanized M8/M10 steel turnbuckles right/left available in different lengths.Order no.Length:66267M8 right / M10 left66 mm66226M8 right / M10 left84 mm67267M8 right / M10 left108 mm

Variants from €21.05*

€25.30*

y0792/01 SPEED TEC EXPERT Zenoah G260 tuning cylinder set

Race ported top end set for Zenoah G260 engine.The SPEED TEC EXPERT genuine Zenoah G260 race ported top end set is optimized for performance with sophisticated craftsmanship and when accurately installed - guarantees, besides greatly increased performance, excellent workmanship and stamina. SPEED TEC EXPERT version modifications: Cylinder: Adjustment of compressionnlarged portsFuel management milledModified exhaust and intake Piston: Weight reducedSkirt shortenedOil ringsPiston above and below piston ring tapered and piston dome ground The set includes the following items: Performance-optimized cylinder and piston, piston ring, piston pin, piston pin circlips and cylinder gasket.To achieve the optimum performance gain of a SPEED TEC EXPERT top end set, we recommend the use of a tuned pipe ().Each SPEED TEC Tuning cylinder set comes with a small amount of a spec. assembly lube for the installation of piston and piston ring. This spec. lube provides the required lubrication to the engine for the first start and dissolves without residue!

€229.90*

This product is currently not available.