y19015 Bindulin Dichtfix (untill 180°!)

rc-car-online

€14.90*

Content: 45 Gramm (€331.11* / 1000 Gramm)

Prices incl. VAT plus shipping costs

Available

Product number: kleb_0008

EAN: 4007089602206

Product information "y19015 Bindulin Dichtfix (untill 180°!)"

Bindulin liquid rubber - very high elasticity

Suitable for additional sealing of tuned pipes and exhaust / manifold connections .
Temperature resistant from -60 ° to + 180 ° C
Resistant against diluted acids.

Also for sealing threaded joints, electric lines and cable lead-throughs in receiver boxes.
The surfaces must be clean, grease free and dry (brake cleaner).

Contents:

1 piece / 45 grams

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

Display reviews in current language only.

No reviews found. Share your insights with others.

Accessories / Spare parts

y0042 Brake cleaner 500 ml, 1 pce.

Fast and thorough cleaning action, acetone-free!Removes lining abrasion, grease, oil, brake fluid, dirt and more. Cleans metal, glass, ceramics a.s.o.. Prevents dispersal of harmful abrasive dust. Spray parts until dirt and grease are washed away or wipe with a clean cloth.Also for degreasing gluing spots ...Content: 500 ml spray can.

Content: 500 Milliliter (€15.00* / 1000 Milliliter)

€7.50*

Similar products

y0994 Marston heat-proof sealer - 1pce.

Marston Universal blue is the leading non-setting gasket and sealing compound in use world-wide. The product is used by many of the world?s major automotive manufacturers and by several Formula 1 teams.Features- Non hardening and non setting- Unlimited assembly time- Vibration resistant- Allows metal to metal contact- Resistant to combustion products, water, engine coolant, petroleum, lubricating oils, kerosene and fluorocarbon refrigerants- Seals surface imperfections- Withstands rapid variations in temperature80 ml tube

Content: 80 Milliliter (€123.75* / 1000 Milliliter)

€9.90*

y804 HT-flange sealer 518, 50 ml up to 200°C

Especially for installation of all engine gaskets. Temperature resistant from -55 °C to +200 °C. Resistant to water, mineral oils, synthetic lubricants, fuels, organic solvents and refrigerants. info: Hand tight: 10 - 20 minReady to use: 1 - 3 hoursGap fill: 0.5 mmContent: 50 ml Notes for usage: This surface seal is not for use as the sole sealant, it should always be applied in combination with a paper gasket.The HT-surface sealing agent should be sparsely applied over the entire surface, with care being taken that the sealant does not enter the devices internals (e.g. crankcase, differential a.s.o.) during the assembly.

Content: 50 Milliliter (€538.00* / 1000 Milliliter)

€26.90*

y0807 MD-Sil RTV silicone sealer

Genuine MD spare/option part. The red version with a temperature resistant up to 300°C. Directions for use:Clean the surfaces with a cleaner. Apply MD-Sil on one side and press the parts together. Touch-dry in 10 - 20 minutes. Curing speed 3 mm/24 hours. Contents:1 piece / 80 ml

Content: 80 Milliliter (€211.25* / 1000 Milliliter)

€16.90*

Customers also viewed

y0994 Marston heat-proof sealer - 1pce.

Marston Universal blue is the leading non-setting gasket and sealing compound in use world-wide. The product is used by many of the world?s major automotive manufacturers and by several Formula 1 teams.Features- Non hardening and non setting- Unlimited assembly time- Vibration resistant- Allows metal to metal contact- Resistant to combustion products, water, engine coolant, petroleum, lubricating oils, kerosene and fluorocarbon refrigerants- Seals surface imperfections- Withstands rapid variations in temperature80 ml tube

Content: 80 Milliliter (€123.75* / 1000 Milliliter)

€9.90*

04.0107 INNOTEC Adhesive remover and degreaser, 500 ml can

Adhesive and Seal RemoverSeal and Bond Remover is a slow evaporating universal degreaser that is also perfect for quickly and efficiently removing all types of adhesive and sealant residue. The product softens most adhesives and sealants to make them easier to remove.Seal and Bond Remover is suitable for all types of metals and most plastics. In addition, it can be used without risk on almost all modern paints. This makes it particularly suitable for removing stickers, emblems, bumper trims and any adhesive residue that may remain. Even traces of sealant and adhesive after dismantling brackets, etc. can be safely removed without damaging the substrate. Seal and Bond Remover is also ideal for making surfaces free of grease and silicone, for example before applying new stickers, emblems, etc.Due to its high dissolving power, Seal and Bond Remover is also a recommended solution for removing tar splashes or even rubber from trim, etc.In the spray can, Seal and Bond Remover is particularly user-friendly and practical to use. Thanks to the unbreakable nozzle with spray tube, even hard-to-reach places are easy to reach. In addition, the spray can has a special valve that allows it to be used in any position. This allows emblems and bumper strips, among other things, to be removed most effectively by spraying Seal and Bond Remover directly behind the part in question while slowly pulling it off. HIGHLIGHTS. Very easy to use. Ideal for removing adhesive, tar, sealant and chewing gum residues Significantly facilitates the cutting out of glued car windows. Does not attack paint or most plastics in any way OEM approved CONTENT Base: Mixture of aliphatic and aromatic hydrocarbons. Density: 762 kg/m³ Consistency: liquid (ready to spray in aerosol can) Viscosity: ± 2 mPa.s Solvent: mixture of aliphatic and aromatic hydrocarbons. Flash point: 0°C Evaporation residue: None, the product dries without residue. Processing conditions: +10°C to +40°C Substrate: The most common substrates. If necessary, test in an inconspicuous place. USAGE.Shake spray can well before use. Spray Seal and Bond Remover on the surface to be treated and allow to act briefly. Remove adhesive, tar, sealant, chewing gum residues with a Multi Wipe. Wipe off with a clean, dry cloth or Multi Wipe. For thicker layers, remove the top layer first and then repeat the treatment. Hand cleaning: With Innotec Power Scrubs or with Innotec Safe Hand Clean Plus and water Shelf life: 2 years in unopened original packaging Storage conditions: Store in a cool, dry place Batch code type: F Details: OEM approval

Content: 500 Milliliter (€39.80* / 1000 Milliliter)

€19.90*

y804 HT-flange sealer 518, 50 ml up to 200°C

Especially for installation of all engine gaskets. Temperature resistant from -55 °C to +200 °C. Resistant to water, mineral oils, synthetic lubricants, fuels, organic solvents and refrigerants. info: Hand tight: 10 - 20 minReady to use: 1 - 3 hoursGap fill: 0.5 mmContent: 50 ml Notes for usage: This surface seal is not for use as the sole sealant, it should always be applied in combination with a paper gasket.The HT-surface sealing agent should be sparsely applied over the entire surface, with care being taken that the sealant does not enter the devices internals (e.g. crankcase, differential a.s.o.) during the assembly.

Content: 50 Milliliter (€538.00* / 1000 Milliliter)

€26.90*

75077 HPI O-ring 4 x 1 mm black

Genuine HPI spare/option part. Content:10 pieces

€5.90*

85246 HPI Engine guard

Genuine HPI spare/option part. Content:1 set

€15.38*