7305/08 FG Crankcase gasket for CY / Zenoah

€4.30*

Prices incl. VAT plus shipping costs

Available

Product number: fg_7305_08

EAN: 3410564516430

Product information "7305/08 FG Crankcase gasket for CY / Zenoah"

Genuine FG spare/option part.
For Zenoah G230/240/260/270/290 engines

Applications:Click here!

Actual product may be of different color. We have no bearing on this since we are not the manufacturer.

Please note:

It is recommended to use a gasket sealer with every gasket on an engine.
This gives better sealing anda longer lasting gasket. We also recommend:

Contents:

1 piece

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

No reviews found. Share your insights with others.

Alternatives

ST-EWP23G SPEED TEC SPEED TEC 0,30 mm Crankcase gasket EWP207

ST-EWP26V SPEED TEC 0,30 mm EWP207 carburetor gasketFor Zenoah G230/G240/G260/G270/G290Genuine Speed-Tec spare/option part. EWP207 is a gasket material based on NBR-bonded synthetic and organic fibres. It therefore has very good oil and fuel resistance and does not swell like other gaskets.EWP207 is ideally suited for sealing against cold and hot oils, greases and fuels. Features Oil resistant Heat repellent Does not swell Contents:1 piece

€5.40*

This product is currently not available.

ST-AN23G SPEED TEC 0,25/0.50 mm Crankcase gasket AN - expansion sealing gasket

Genuine Speed-Tec spare/option part. AN - expansion sealing gaskets are in use in the 2-stroke motor sports for years and are based on NBR-linked cellulose fibers. They are especially used for sealing hot oils, greases and fuels! The sealing material is compressed during assembly, and as soon as it comes into contact with fuel, it swells again. Thus it is i.e. possible to make up for irregularities in the sealed surfaces (i.e. cylinder / crankcase) and seal them properly! The material of the SPEED TEC AN - expansion sealing gaskets guarantees a very good dimensional accuracy and is often the solution for leaks on your engine! Technical data of the material in contact with fuel:- Rebound ASTM G > 30%; increase in thickness < 5%; weight gain < 55%;- Compressibility ASTM F36 G 22.5% +/- 2.5 27.5% +/- 7.5 The SPEED TEC AN - expansion sealing gaskets are available in the following versions:# ST-AN26V carburetor gasket 0,25/0,50 mm# ST-AN25I insulator gasket 0,25/0,50 mm# ST-AN24L air filter gasket 0,25/0,50 mm# ST-AN22 cylinder gasket, two bolt 0,25/0,50 mm# ST-AN42 cylinder gasket, four bolt 0,25/0,50 mm# ST-AN23G crank case gasket 0,25/0,50 mmContents:1 piece

€4.40*

Details

y1595 SpeedTec Teflon Crankcase gasket 0,5mm

Genuine SpeedTec spare/option part. For Zenoah G230/240/260/270/290. Advantages Extremely temperature resistant, up to 300°C Seals 100%, even without stickin Seal can be used several times No more slipping of cylinders or isolators! Contents:1 piece

€5.40*

7388 FG Gasket kit Zenoah G230/G260R, CY

Genuine FG spare/option part. Gasket kit for the Zenoah engines G230 and G260RC. Actual product may be of different color. We have no bearing on this since we are not the manufacturer.Set includes the following parts:7332 Silencer gasket for CY / Zenoah7335 Insulator gasket for CY / Zenoah7337 Carburetor gasket for Zenoah, CY7305/08 Crankcase gasket for CY / Zenoah 7306/09 Special Cylinder foot gasket CY / Zenoah Please note:It is recommended to use a gasket sealer with every gasket on an engine. This gives better sealing anda longer lasting gasket. We also recommend:y0804 HT-flange sealer 518 y0994 Marston sealery0807 MD-Sil RTV silicone sealer

€12.50*

Accessories / Spare parts

y804 HT-flange sealer 518, 50 ml up to 200°C

Especially for installation of all engine gaskets. Temperature resistant from -55 °C to +200 °C. Resistant to water, mineral oils, synthetic lubricants, fuels, organic solvents and refrigerants. info: Hand tight: 10 - 20 minReady to use: 1 - 3 hoursGap fill: 0.5 mmContent: 50 ml Notes for usage: This surface seal is not for use as the sole sealant, it should always be applied in combination with a paper gasket.The HT-surface sealing agent should be sparsely applied over the entire surface, with care being taken that the sealant does not enter the devices internals (e.g. crankcase, differential a.s.o.) during the assembly.

Content: 50 Milliliter (€538.00* / 1000 Milliliter)

€26.90*

y19015 Bindulin Dichtfix (untill 180°!)

Bindulin liquid rubber - very high elasticitySuitable for additional sealing of tuned pipes and exhaust / manifold connections .Temperature resistant from -60 ° to + 180 ° CResistant against diluted acids.Also for sealing threaded joints, electric lines and cable lead-throughs in receiver boxes.The surfaces must be clean, grease free and dry (brake cleaner).Contents:1 piece / 45 grams

Content: 45 Gramm (€331.11* / 1000 Gramm)

€14.90*

y0994 Marston heat-proof sealer - 1pce.

Marston Universal blue is the leading non-setting gasket and sealing compound in use world-wide. The product is used by many of the world?s major automotive manufacturers and by several Formula 1 teams.Features- Non hardening and non setting- Unlimited assembly time- Vibration resistant- Allows metal to metal contact- Resistant to combustion products, water, engine coolant, petroleum, lubricating oils, kerosene and fluorocarbon refrigerants- Seals surface imperfections- Withstands rapid variations in temperature80 ml tube

Content: 80 Milliliter (€123.75* / 1000 Milliliter)

€9.90*

y0807 MD-Sil RTV silicone sealer

Genuine MD spare/option part. The red version with a temperature resistant up to 300°C. Directions for use:Clean the surfaces with a cleaner. Apply MD-Sil on one side and press the parts together. Touch-dry in 10 - 20 minutes. Curing speed 3 mm/24 hours. Contents:1 piece / 80 ml

Content: 80 Milliliter (€211.25* / 1000 Milliliter)

€16.90*

Customers also bought

5250 Mielke Air Booster carbon airbox

Genuine Mielke spare/option part.The Carbon Air Booster No. 5250 has been specially developed for the tough race use! The complete air filter weighs 138 grams with all attachments and aluminum adapter, the carbon part alone weighs 66 grams.Nevertheless, an extreme stability has been achieved through the bulges in the mold. Furthermore, the design ensures a straight air flow in conjunction with the new air ducts. When using these ducts, the fresh air from the cooling opening is pressed directly into the air booster, increasing engine performance or reducing temperatures.Contents:1 piece

€111.30*

y1016/051 Carburetor WT1107 G320RC

Genuine Zenoah spare/option part. Replacement part fits Zenoah G320RC.

€79.90*

Original Zenoah repair-kits for 230/240/260/270/290/320 engines

7387 Rebuilt kit Zenoah G230Cylinder-piston repair kit for Zenoah engine G230. Set includes the following parts:Cylinder G230Piston G230Piston ring G230Cylinder foot gasketCentering disksPiston pin clipy0914 Original Zenoah G240 rebuild kitRebuild kit for the Zenoah G240 engine to replace piston/cylinder related parts. The kit includes the following parts:Cylinder G240Piston G240Piston ring G240Piston pin G240Piston pin retainer clipsCylinder gaskety0913 Original Zenoah G260 rebuild kit fits too CY, Losi and HPI enginesRebuild kit for the Zenoah G260 engine to replace piston/cylinder related parts, fits the G260 engines as well. The kit includes the following parts:Cylinder G260Piston G260Piston ring G260Piston pin retainer clipsCylinder gasketThis kit can also be installed on CY26, HPI and Losi engines, but you have to use Zenoah needle bearing 7312 and spacer washers 7312/01 for this application! y0915 Original Zenoah G270 rebuild kitRebuild kit for the Zenoah G270 engine to replace piston/cylinder related parts. The kit includes the following parts:Cylinder G270Piston G270Piston ring G270Piston pin G270Piston pin retainer clipsCylinder gaskety0916 Original Zenoah G290 rebuild kitRebuild kit for the Zenoah G290 engine to replace piston/cylinder related parts. The kit includes the following parts:Cylinder G290Piston G290Piston ring G290Piston pin G290Piston pin retainer clipsCylinder gaskety1016/095 Original Zenoah 32 cm³ 4 Bolt Rebuilt kitOriginal Zenoah 32 cm³ Rebuilt kit Top quality with Zenoah warranty!Set includes the following parts: CylinderPistonPiston ringCylinder foot gasketPiston pinPiston pin clipThrust washer for needle bearingCover for transfer portAttention: For the assembling of the covers enclosed please use the HT-flange sealer y804 and pay attention to the assembling instructions enclosed.Please note:It is recommended to use a gasket sealer with every gasket on an engine. This gives better sealing anda longer lasting gasket. We also recommend:y0804 HT-flange sealer 518 19015 Bindulin Siliconey0994 Marston sealery0807 MD-Sil RTV silicone sealer

€79.90*

Configure now

7303/08 FG Seal ring for CY / Zenoah / Fuelie

Genuine FG spare/option part.Spare partvv for CY / Zenoah G230/260.One each 1x 12 x 28 x 7 mm and 12 x 22 x 7 mmContents:2 pieces

€17.50*

7304/02 FG Ball bearing for CY / Zenoah / Fuelie

Genuine FG spare/option part.Dimensions:12 x 28 x 8 mmContents:2 pieces

€21.90*

y0950 Spark plug, Champion RZ7C, 3 pcs.

Genuine Champion spare/option part.OEM spark plug for Zenoah G230/240/260/270/290/320.Ideal too for PT, Chung Yang, Losi, HPI-Fuelie, Smartech, Nutech and Carson and other engines.The most widely used, qualitatively best spark plug for the model sport! Especially by the most 1/6 scale models the short ceramic body is indispensable, because otherwise on grounds of the heightened mounting position- the spark plug would protrude beyond the roll cage and therefore is extremely fragile by flashovers.Contents:3 pieces

€19.90*

Similar products

7304/02 FG Ball bearing for CY / Zenoah / Fuelie

Genuine FG spare/option part.Dimensions:12 x 28 x 8 mmContents:2 pieces

€21.90*

7306/09 FG Special Cylinder foot gasket CY / Zenoah

Genuine FG spare/option part.For Zenoah G230/G260Applications:Click here!Rugged and extremely wear-resistant cylinder gasket. Suitable for the Zenoah engines G230, G260 and the CY engines with the 2-bolt cylinder mounting.Thickness: 0.5 mm. Actual product may be of different color. We have no bearing on this since we are not the manufacturer.Please note:It is recommended to use a gasket sealer with every gasket on an engine. This gives better sealing anda longer lasting gasket. We also recommend:y0804 HT-flange sealer 518 y0994 Marston sealery0807 MD-Sil RTV silicone sealerContents:1 piece

€5.40*

7303/08 FG Seal ring for CY / Zenoah / Fuelie

Genuine FG spare/option part.Spare partvv for CY / Zenoah G230/260.One each 1x 12 x 28 x 7 mm and 12 x 22 x 7 mmContents:2 pieces

€17.50*

7257 FG Team decals Honda Accord - set

Contains the advertising labels for original design.Sheet dimensions:470 x 350 mm330 x 200 mmThe decal set contains no headlights, rear lights etc.Please order separately.

€22.80*

7301/08 FG Crank case A+B for Zenoah G230/260

Genuine FG spare/option part. Content:2 pieces

€99.95*

7308/09 FG Piston for Zenoah G230/240

Genuine FG spare/option part.Contents:1 piece

€33.90*

7263/01 FG Team decal set for Opel V8 DTM

Genuine FG spare/option part. Contains the stickers of the headlights, the rear lights and the radiator grill. Not included are the advertising labels for the original design. Please order separately.Dimensions:480 x 80 mm295 x 190 mm270 x 105 mmContents:1 set

€22.90*

7262/05 FG Spoiler mount for Opel V8 DTM - 2pcs.

Suitable for .Height 39 mmWidth 22 mmThickness 5 mm

€3.80*

7264 FG Team decals Opel V8/Jägermeister

Genuine FG spare/option part. Contains the advertising labels for original design.The decal set contains no headlights, rear lights etc. Please order separately. Dimensions Jägermeister Logo:1 x 170 mm diameter1 x 90 mm diameter4 x 50 mm diameterDimensions Jägermeister lettering:1 x 250 mm width, 4 x 210 mm width,1 x 130 mm width, 2 x 60 mm width, Dimensions Dezent lettering 4x 110 mm width Total dimensions: Width: 490 mm Height: 420 mmContents:1 piece

€36.30*

7252/05 FG Spoiler mount for CLK-DTM - 2pcs.

Suitable for .Height 43 mmWidth 33 mmThickness 5 mm

€4.00*

7306 FG Cylinder gasket for Zenoah ZG22, 1 pce.

Spare part for Zenoah ZG22 with a 0.6 mm Thickness. Actual product may be of different color. We have no bearing on this since we are not the manufacturer.Please note:It is recommended to use a gasket sealer with every gasket on an engine. This gives better sealing anda longer lasting gasket. We also recommend:y0804 HT-flange sealer 518 y0994 Marston sealery0807 MD-Sil RTV silicone sealer

€3.10*

7304 FG Ball bearing 12x28x8mm for Zenoah

Genuine FG spare/option part. Spare part for Zenoah ZG22.Contents:2 piece

€36.00*