Skip to main content Skip to search Skip to main navigation
EXTRA 20% off Outlet*. Use Code: EXTRA20 at checkout!!
+49 2151 820200 Mon-Fri 9 am - 6 pm, Sa 9 am - 1 pm

54160/03 FG Body Monster Buggy Off-Road WB535 painted

Product information "54160/03 FG Body Monster Buggy Off-Road WB535 painted"

Genuine FG spare/option part.

Contents:
  • 1 piece

0 of 0 reviews

Average rating of 0 out of 5 stars

Leave a review!

Share your experiences with other customers.


Alternatives

Average rating of 0 out of 5 stars

54150/01 FG FG Monster Buggy WB 535 body shell, clear
Genuine FG spare/option part. Contents:1 piecePainting tips:

€131.50*

Accessories / Spare parts

Average rating of 0 out of 5 stars

54160/04 FG Rear spoiler Monster Buggy Pro Off-Road WB535 painted
Genuine FG spare/option part.Contents:1 set

€35.90*

Customers also bought

Average rating of 0 out of 5 stars

6493 FG Steel spur gear 48T with adapter
Genuine FG spare/option part. Hardened steel gearwheels for the gears of the 1/6 off-road models.Module: m=1,5Contents:1 set

€93.50*

Average rating of 0 out of 5 stars

6431 FG Steel pinion 16 teeth
Genuine FG spare/option part.For combination with 48T main and differential spur gear.Diameter: 26.7 mmBore: 10 mmTotal width: 16 mmTooth width: 9.5 mmModule: m=1,5Contents:1 piece

€26.90*

Average rating of 0 out of 5 stars

6013 FG Body clips
Genuine FG spare/option part. Dimensions:Length: 33 mmWire diameter 1.5 mmContents:10 pieces

€5.30*

Average rating of 0 out of 5 stars

54160/04 FG Rear spoiler Monster Buggy Pro Off-Road WB535 painted
Genuine FG spare/option part.Contents:1 set

€35.90*

Average rating of 0 out of 5 stars

y1452/02 Body mount conversion kit, FG 1/6 scale 2WD Off-Road models and Smartech Uno/Carson Attack
Genuine HT spare/option part. Conversion kit for FG 1/6 scale 2WD Off-Road models and Smartech Uno/Carson Attack to Mega Beetle.The 8.5 x 1.0 mm female thread perfectly fits the usual stock 8 mm body mounts non-cutting. The thread depth of about 22 mm allows for about 10 - 15 mm of body position adjustment!Content of this set:2 pieces of front body mount (item no. 7154)2 pieces of side body mount (item no. 7154/01)2 pieces of rear roll cage mount (item no. 305001)2 pieces of aluminum body mount extension (item no. y1452)4 pieces of body clip (item no. 6013)4 pieces of M4 x 25 mm worm screw for installation of side and front mounts

€59.90*

Similar products

Average rating of 0 out of 5 stars

6155 FG Marder body shell Zenoah white
Genuine FG spare/option part. The FG Marder body shell is delivered white and without window gitter or decal set.Dimensions:Length: 580 mmWidth: 240 mmHeight: 205 mmContents:1 piece

€114.99*

Average rating of 0 out of 5 stars

58150/02 FG Rear spoiler Monster Buggy Pro Off-Road WB535 clear
Accessories for FG 58150 body shell Beetle 4WD.Contents:1 piecePainting tips:

€31.90*

Average rating of 0 out of 5 stars

54150/01 FG FG Monster Buggy WB 535 body shell, clear
Genuine FG spare/option part. Contents:1 piecePainting tips:

€131.50*

Average rating of 0 out of 5 stars

6154/01 FG Body polycarbonate Fun Cross
Genuine FG spare/option part. Body shell is delivered white and without decal set.Measures:Length: 530 mmWidth: 300 mmHeight: 190 mmContent:1 piece

€130.50*

Average rating of 0 out of 5 stars

67160/05 FG Body Leopard Sportsline, ready plastered
Genuine FG spare/option part.The bodyshell is made from colored (not painted!) polycarbonate and will be delivered without rear wing.The original FG decal set is included, ready pasted!Content:1 piece

€124.95*

Average rating of 0 out of 5 stars

67160/01 FG Body Leopard 2 Comp., Leo 2020 2WD/4WD, (lenght +26mm), transparent, 1 pce.
Spare part for the Leopard 2WD/4WD Competition and FG LEO 2020 2WD.Painting tips:

€139.50*

Average rating of 0 out of 5 stars

6155/03 FG Body polycarbonate Fun Cross Sport
Genuine FG spare/option part. Measures:Length: 530 mmWidth: 300 mmHeight: 190 mmContent:1 piece

€134.95*

Average rating of 0 out of 5 stars

6154/03 FG E-Marder body shell Zenoah
Genuine FG spare/option part. FG E-Marder body shell with decals but without window gitter.Dimensions:Length: 580 mmWidth: 240 mmHeight: 205 mmContents:1 piece

€135.95*

Average rating of 0 out of 5 stars

36110 FG Body Monster-/ Stadium-Hummer H2 4WD yellow, 1 pce.
Yellow Hummer H2 body fits for Monster / Stadium Trucks.Length 660 mmWidth 290 mmHeight 195 mmWheelbase 460 mm

€149.90*

Average rating of 0 out of 5 stars

68150/01 FG Body shell Off-Road Buggy 4WD, clear - 1 pcs.
he bodyshell is made from clear unpainted polycarbonate and it´s only for 4WD models.Length 500 mmWidth 285 mmHeight 155 mmPainting tips:

€112.40*

Average rating of 0 out of 5 stars

33110 FG Body Monster-/ Stadium-Hummer H2, yellow for WB535
Genuine FG spare/option part.The bodyshell is made from colored polycarbonate. The decal set is not included!Dimension:Width between the edges on the front axle: approx. 260 mmWidth between the edges on the rear axle: approx. 280 mmWidth in the middle: approx. 280 mmLength: ca. 660 mmContents:1 piece

€189.90*

Average rating of 0 out of 5 stars

64140/01 FG Body FG TR2 and TR4, coloured
Genuine FG spare/option part.Dimensions:Width between the front wheels: approx. 225 mmWidth between the rear wheels: approx. 280 mmWidth in the middle: approx. 360 mmLength: approx. 660 mm

€177.50*

Customers also viewed

Average rating of 0 out of 5 stars

54150/01 FG FG Monster Buggy WB 535 body shell, clear
Genuine FG spare/option part. Contents:1 piecePainting tips:

€131.50*

Average rating of 0 out of 5 stars

FG Monster Truck WB535 HT-Edition
The Wheelbase of the WB535 2WD version is 60 mm longer. This modification improved the directionally stability as well as further driving qualities significantly. In addition parts of the 4WD Monster models were assembled in order to make a conversion to a 4WD model possible with low efforts. According to the large tires this model can be driven almost everywhere. The 26 cm³ Zenoah engine provides sufficient power. Driving fun as well as tremendous looks are the prime characteristics of these models.The body shell comes unpainted, a decal set with writings for further decoration is enclosed in the delivery.You can select the car with complete RTR-equipment from the options menu. RTR-equipment RTR = Ready to Run. The RTR version comes ready to use with the 2,4 GHz rc-system already installed. Transmitter: Reflex Wheel Pro III 2,4 GHzReceiver: Mini BECHigh power servo for throttle and brakeLargescale servo for steeringTx-battery, rx-battery Technical description:The undercarriage of the Monster models is built on a 4 mm angled alloy plate. All borings for fixa- tion of the chassis parts at the bottom side are countersunk in order to prevent the screw heads from sticking out. At the front axle you have the possibility to adjust toe-in or toe-out as well as the wheel camber through track rods with right-hand/left-hand thread. The wheel camber of the rear wheels can be adjusted individually through adjusting screws with right-hand/left-hand thread. Four large-volume oil-pressure shock absorbers are mounted at the lower double wishbones of front and rear axle, these are able to absorb larger shocks of jumps to a great extent and care for an optimal road grip. All rotating drive components are supported by ball bearings. Highly stressed steel parts such as rear gearwheels, differential gears and drive components are hardened. Fuel tank and ra- dio control parts are protected through alloy plates at the sides. The body parts are made of coloured or respectively clear polycarbonate. The Monster tires with tire inserts are glued on chrome-plated rims.The models are equipped with a powerful 26 cm³ combustion engine with ready-for-use oiled air fil- ter. The engine runs with normal 2-stroke petrol-oil mixture (available at every petrol station). The tank filling of 0,7 litres enables you to run your model around 45 minutes. With the installed pull-start system the engine can be started without any difficulties.HT-Edition? HT-Edition means: this version comes with a big set of spare / option parts included. Steel pinions - Non-standard sizesEach of two different ratios are supplied with.Modul: m=1,5Value: 62,60 EURAlloy engine mount smallCNC machined alloy engine mounts, direkt replacement for the stock plastic parts, heat and tweak resistant.Value: 54,90 EURAlloy spur gear carrierUse for 48T - 46 teeth spur gears.Value: 39,90 EURBall bearing set, sealed, set of 15The seal rings on sealed ball bearings keep dirt and dust out of the bearings. They are therefore particularly suitable for use in dirty and dusty environments.Value: 59,90 EURTotal value: 217,30 EURThe pictures may display the car with some optional items which are not included, like bed-mounted rollbar, lights, front bumper or mirrors. These items can be added in the drop down menus.The RTR version is delivered with assembled and preset radio control system and rechargeable batteries. To complete the non-RTR version all popular servos and radio control sys- tems are suitable.Dimensions: Length: 780 mm Width: 510 mm Height: 350 mm Wheelbase: 353 mm

€1,179.90*

Average rating of 0 out of 5 stars

54160/04 FG Rear spoiler Monster Buggy Pro Off-Road WB535 painted
Genuine FG spare/option part.Contents:1 set

€35.90*

Average rating of 0 out of 5 stars

41120, FG Stadium Jeep body shell, red, for 2WD for WB535
The bodyshell is made from colored polycarbonate.Length approx. 670 mmWidth approx. 300 mmHeight approx. 225.mmWheelbase approx. 470 mm

€170.00*

Average rating of 0 out of 5 stars

305147 Painted Smartech body shell for Monster-Truck, Comanche, CRT, CPT, 1 pce.
Painted body shell, fits Comanche and CPT without any modifications as well! Comes with decal sheet included.Fits: Smartech Monster-Truck, Carson Commanche, CRT und CPT.Measures:Length 655 mmWidth 265 mmHeight 155 mm

€49.90*

Average rating of 0 out of 5 stars

TT1023 Top Tuning brushless conversion kit with motor and ESC for Losi 5ive-T 2.0
Genuine Top Tuning spare/option part.This kit includes all required parts for converting a Losi 5ive-T 2.0 into an electric car.Contents:TT1024 Top Tuning Electric conversion kit for Losi 5ive-T 2.0y1531/01 ZTW Beast Pro 200A ESC and 56112 ZTW Monster Brushless Motor 700 kV Genuine Top Tuning spare/option part. All aluminum parts are made of 7075 alloy.Front motor mount design to assure ample clearance for the rear brake disc when running mechanical brakes.Accepts two batteries up to 164 mm long und 50 mm wide. Rear motor clamps:Diameter 57 mm i.e. for Tenshock or CastleDiameter 57,8 mm i.e. for Leopard 58 lineDiameter 60 mm i.e. for LehnerDiameter 70 mm i.e. for BP70120 ZTW Beast Brushless engine 620 kVThis conversion kit is for the 5ive-T 2.0 only. It even allows for running the big BP70120 ZTW Beast Brushless motor in combination with mechanical brakes! The center diff will be turned around between its mounting pillars for installation.Contents:Motor mount with your choice of rear clamp for 57 / 57.8 / 60 / 70 mm motor diameterBattery carrier plate made of 3 mm epoxy with aluminum brackets for the hook-and-loop bands4 hook-and-loop bands to secure the batteriesaluminum mounting pedestals for the battery plate17T pinion with 8 mm bore diameterMounting screws Specification y1567 ZTW Beast Pro 200A ESC: - Conzinous current: 200A - Burst current: 1300A - BEC: 6,0 V/7,4 V adjustable / 8 A- Battery NIXX / LiPo: 8 - 24NC / 6-8S LiPo - Width: 55 mm - Length: 90 mm - Height: 50 mm - Weight: 407g - Programmable: Ja - Waterproof: Ja - Suitable Car: 1/5 Buggy/Truggy Suitable car weight: 13kg Specifications 56112 ZTW Monster Brushless motor:Max. Amps: 175AMax. Voltage: 42VMax. Power: 7.350WKV (RPM/Volt): 700KVMounting hole depth: 8 mmBolt pattern: 4 x M4 on each 30 mmCase diameter: 57,8 mmCase length: 112 mmFree shaft length: 30 mmShaft diameter: 8 mmGewicht: 1260g Alternative:y1549/01 ZTW Beast Pro 300A 12S ESC with BP70120 620KV Brushless motor: Genuine ZTW spare/option part. Features:Enchanced throttle response, excellent acceleration, linearity and driveabilityUsind the advanced PC interface allows you to set up, program or update the firmwareFully Programmable via LCD program card, PC interfaceAdjustable BEC output 6.0/7.4V, up to 8A current outputMultible protection features: Low voltage cut-off protection, over-heat protection and throttle signal loss protectionSpecification Y1549 ZTW Beast Pro 300A 12S ESC:Continuous Current: 300ABurst Current: 1800ABEC: 6,0 V/7,4 V einstellbar / 8 ABattery NIXX / LiPo: 18 - 36NC / 6-12S LiPoWidth: 74 mmLength: 115 mmHeight: 78 mmWeight: 500gProgrammable: JaWaterproof: splash-proofSpecifications 70120 ZTW Beast Brushless motor 620kV:Max. Amps: 200AMax. Voltage: 8-14SMax. Power: 10.000WKV (RPM/Volt): 620KVResistance: 0,0095Mounting hole depth: 8 mmCase diameter: 70 mmCase length: 120 mmFree shaft length: 30 mmShaft diameter: 8 mmGewicht: 1730g Driving batteries with the following maximum dimensions can be installed: Length: 165 mm Width: 51 mm Height: variable The speed controller (ESC) requires EC8 connections or corresponding adapter cables! Features:High Quality BearingsRotor-4Pole High Quality MagnetsStator-Super Thin Silicon Steels Super Strength 8mm ShaftCNC Aluminium Heatsink ShellCopper Wires Of High Temperature EnduranceContents:1 set

From €599.90*

Average rating of 0 out of 5 stars

AREA-XL 004 Frontchassisstrebe für Losi Desert XL/XL-E
CNC-machined 6061-T6 aluminum front chassis brace for Losi DBXL. Compared to the stock plastic part the higher strength of the aluminum part noticeably increases the chassis rigidity.

€19.90*
Loading...
Upload in progress, please be patient ...
Shopware-Plugin Development Shopware-Plugin Development