8497 FG Conversion kit differential twofold self-locking

€99.50*

Available

Product number: fg_8497

EAN: 3410564522431

Product information "8497 FG Conversion kit differential twofold self-locking"

Genuine FG spare/option part.

This conversion kit includes all necessary parts to convert the alloy differential 8483/05 or 8485/05 to a double self-locking differential gear.

Contents:

1 set

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

Display reviews in current language only.

No reviews found. Share your insights with others.

Similar products

y0270 Alloy differential case conversion kit for FG 2WD models

alu_diff_umbau Application: y0270/01 Smartech (except Gas Devil 4x4)

Genuine HT spare/option part.Alloy case conversion kit for Smartech / Carson 2WD and FG 2WD large scale cars .Comes complete as shown with reinforced differential tube, sealed bearings, installed needle bearings, shims, screws and o-rings.The scope of supply for FG:4 x Countersunk screw M4 x 8 mm2 x Shims 8 x 20 x 0,10 mm2 x Lenticular flange head screw M3 x 10 mm2 x Washers 3,2 mm2 x Gasket for DiffThe scope of supply for Smartech:4 x Countersunk screw M4 x 8 mm4 x Shims 8 x 20 x 0,10 mm8 x Shims 5 x 17 x 0,10 mm2 x Lenticular flange head screw M3 x 10 mm2 x Washers 3,2 mm2 x Gasket for DiffContents:1 set

€99.90*

y1420 Diff Locker for Losi 5ive-T/2.0, 5ive-B and Mini

Genuine HT spare/option part. The spool replaces the center differential and keeps the speed of both output shafts the same. As a result, especially the acceleration of the vehicle is significantly increased.The spool is nicely made of high-quality burnished steel and very strong. Its total length is the same as a normal differential housing with gasket. The gasket is no longer used with the spool. The driving pin of the front output shaft is secured by an O-ring. The screws for the connection with the spur gear are secured with nylock nuts. This eliminates the need for waiting for the curing of a thread locking compound and makes the removal of screws with damaged head much less critical.The spool would physically fit front and rear applications as well; however, its use here makes no sense to driving dynamics.Scope of delivery:Spool2 x Driving pin 4 x 20 mmO-ring4 x Steel nylock nut M4

€39.90* €59.95* (33.44% saved)

8496 FG Differential lock

Genuine FG spare/option part. Through the enlarged locking mechanism pressure is produced on two bevel wheels. Therefore we gained a better distribution of compression and an even more sensitive adjustment. Suitable for all 1:5 models and 1:6 Race-Trucks. The set includes all parts necessary to retrofit the alloy differential 8485/05.Contents:1 set

€34.50*

y1163 Aluminum differential case conversion kit for FG 2WD/4WD

y1163 Version: y1163/02 for 4WD models

Genuine HT spare/option part.Alloy diff case conversion kit for FG 2WD cars and 4WD large scale cars, fits front or rear axle. You need two sets to do a complete car.Comes complete as shown with sealed bearings, installed needle bearings, shims, screws and o-rings.Please note:The differential comes unassembled, we recommend assembly tool #8505 for bevel gear installation.Contents:1 piece

€89.90*

HT Aluminum differential case conversion kit Carson Gas/Hell Devil/CRT 4x4/Thunderbolt, y0928, set

Alloy case conversion kit for Carson Gas Devil 4x4 (Smartech Titan) only, can be used for all differentials.Comes complete as shown with sealed bearings, installed needle bearings, shims, screws and o-rings.

€89.90*

y0929 HT Aluminum limited slip differential conversion kit for Carson Gas Devil + CRT 4x4, Conrad Hell Devil, Smartech Titan

Genuine HT spare/option part. Alloy case conversion kit for Carson Gas Devil, Carson CRT 4x4, Conrad Hell Devil and Smartech Titan, can be used for the center differential onlyComes complete as shown with sealed bearings, installed needle bearings, shims, screws and o-rings, diff tube and the parts for the slip adjustment device.Adjustment of the locking effect:The adjusting screw which presses on the bevel gear axle and the thrust bearing regulates the locking. This causes friction between the bevel gear and the diff. housing. The locking effect can be adjusted between 0% and about 90%. The adjustment has to be changed according to track surface and dirt accumulation.Loosen the locking effect completely if the track is wet.Contents:1 piece

€129.90*

8485/01 FG Alloy differential adjustable for 1:5 conversion kit - 1pce.

The conversion kit includes all parts needed for a conversion from a standard plastic differential to an adjustable alloy differential.Please note: The differential comes unassembled, we recommend assembly tool

€117.95*

8507 FG Differential conversion kit 30° conical

Genuine FG spare/option part. Conversion kits for the alloy differential gears 8500/05 and 8501/05.You achieve an even more effective locking effect through the use of these conical friction surfaces.Contents:1 set

€28.99*

8484 FG Alloy differential for 1:5 and 1:6 conversion kit

Genuine FG spare/option part. The conversion kit includes all parts needed for a conversion from a standard plastic differential to a non-adjustable alloy differential.Content:1 set

€99.99*

8506 FG Differential conversion kit 45° conical

Genuine FG spare/option part. Conversion kits for the alloy differential gears 8500/05 and 8501/05. You achieve an even more effective locking effect through the use of these conical friction surfaces.Contents:1 set

€52.40*

68405/01 FG Alloy differential 4WD conversion kit

Genuine FG spare/option part. Conversion kit for standard differential. Precise, solid and reliable, for use at competitions.Suitable for Off-Road Buggy 4WD RTR, Off-Road Beetle 4WD RTR and Monster/Stadium models 4WD RTR.Contents:1 set

€92.95*

8502 FG Conversion kit fourfold self-locking for differential

Genuine FG spare/option part. This conversion kit includes all necessary parts to convert the alloy differentials 8483/05 or 8485/05 to a quadruple self-locking differential gear.Contents:1 set

€152.95*

Customers also viewed

8500/05 FG Alloy differential self-locking double - 1pce.

Suitable for all 1:5 models, Trucks, Formula 1 and Leopard.Please note: The differential comes unassembled, we recommend assembly tool #8505 for bevel gear installation.

€195.50*

9470 FG Ball driving set for 1:5 390 mm

Genuine FG spare/option part. Contents:1 set

€129.95*

Mecatech FW01 Touring car, wheelbase 530 mm Chassis Kit -- Europe- and world champion

The Mecatech FW01 is for sure the currently most innovative 1/5 race car designed for the dedicated and technically enthusiastic rc car driver.Everyone is enthusiastic about the perfectly fitting and precise workmanship at the highest level. Only high quality materials are used for the production.Since many years Mecatech is a well-know premium manufacturer of largescale hydraulic brakes or shocks and, as only a few may know, a technology expert for a number of Formula 1 racing teams!The Chassis Kit of the FW01 is particulary intended for "switchers" and "newcomers" and differs from the Basic kit in that the brakes and shock absorbers are already included in the Chassis Kit. Here is a list of the parts that are required for completion:brakes and shocks (Difference to Chassis Kit)DifferentialEngine Clutch, Airbox and tuned pipe systembody shell and tiresElectonic components such as servos, batteries and Remote controlStock gearing:Clutch pinion / spur gear: 36T / 64TLayshaft pinion / differential: 24T / 73T Currently the Mecatech FW01 is for sure the benchmark of the 1/5 scale racing scene! In the first year Markus Feldmann won with his FW01 1: 5 Mecatech on one of the world's finest and most demanding race track in Lostallo / SwitzerlandMecatech is multiple German, European and World Champion with the FW01 and as the last result:Markus Feldman wins the European Championship in Tourlaville/France. All top 5 positions went to drivers running a Mecatech FW01. 7 out of 10 finalists cars were Mecatech FW01.Although the fit of the Mecatech FW01 parts makes the assembly of the car a great experience, some of our customers want to use the expertise of our shop and wish their FW01 fully assembled and tuned in by us!The complete assembly of your FW01 by our workshop is possible for an additional charge. Please note that the costs of the full assembly with servos a.s.o. do not include the price of any rc-components. If you do not have a suitable radio system with servos and batteries as well as switch and charger, you have to take an additional EUR 800 to EUR 1,500 for this equipment into account. We will be happy to make you an appropriate offer.We are currently waiting for the latest version of the Mecatech FW01.The following components are not included in the basic kit not and can be selected individually through the choice of options: brakes, shocks, engine, clutch, exhaust and airbox, differential gear, body shell and wheels. Not included are all relevant components for remote control!We are currently waiting for the latest version of the Mecatech FW01.Included in the chassis kit:- All pinions- clutch bell- Coupling fixation- All parts and screws for mounting the enginenot included:- differential- Engine and linkage- body shell and spoilers- Airbox- clutch - engine- Electronics- Tires

€2,670.00*