8496 FG Differential lock

€34.50*

Available

Product number: fg_8496

EAN: 3410564522394

Product information "8496 FG Differential lock"

Genuine FG spare/option part.

Through the enlarged locking mechanism pressure is produced on two bevel wheels. Therefore we gained a better distribution of compression and an even more sensitive adjustment.

Suitable for all 1:5 models and 1:6 Race-Trucks.

The set includes all parts necessary to retrofit the alloy differential 8485/05.

Contents:

1 set

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

Display reviews in current language only.

No reviews found. Share your insights with others.

Similar products

y0270 Alloy differential case conversion kit for FG 2WD models

alu_diff_umbau Application: y0270/01 Smartech (except Gas Devil 4x4)

Genuine HT spare/option part.Alloy case conversion kit for Smartech / Carson 2WD and FG 2WD large scale cars .Comes complete as shown with reinforced differential tube, sealed bearings, installed needle bearings, shims, screws and o-rings.The scope of supply for FG:4 x Countersunk screw M4 x 8 mm2 x Shims 8 x 20 x 0,10 mm2 x Lenticular flange head screw M3 x 10 mm2 x Washers 3,2 mm2 x Gasket for DiffThe scope of supply for Smartech:4 x Countersunk screw M4 x 8 mm4 x Shims 8 x 20 x 0,10 mm8 x Shims 5 x 17 x 0,10 mm2 x Lenticular flange head screw M3 x 10 mm2 x Washers 3,2 mm2 x Gasket for DiffContents:1 set

€99.90*

y1420 Diff Locker for Losi 5ive-T/2.0, 5ive-B and Mini

Genuine HT spare/option part. The spool replaces the center differential and keeps the speed of both output shafts the same. As a result, especially the acceleration of the vehicle is significantly increased.The spool is nicely made of high-quality burnished steel and very strong. Its total length is the same as a normal differential housing with gasket. The gasket is no longer used with the spool. The driving pin of the front output shaft is secured by an O-ring. The screws for the connection with the spur gear are secured with nylock nuts. This eliminates the need for waiting for the curing of a thread locking compound and makes the removal of screws with damaged head much less critical.The spool would physically fit front and rear applications as well; however, its use here makes no sense to driving dynamics.Scope of delivery:Spool2 x Driving pin 4 x 20 mmO-ring4 x Steel nylock nut M4

€39.90* €59.95* (33.44% saved)

y1163 Aluminum differential case conversion kit for FG 2WD/4WD

y1163 Version: y1163/02 for 4WD models

Genuine HT spare/option part.Alloy diff case conversion kit for FG 2WD cars and 4WD large scale cars, fits front or rear axle. You need two sets to do a complete car.Comes complete as shown with sealed bearings, installed needle bearings, shims, screws and o-rings.Please note:The differential comes unassembled, we recommend assembly tool #8505 for bevel gear installation.Contents:1 piece

€89.90*

HT Aluminum differential case conversion kit Carson Gas/Hell Devil/CRT 4x4/Thunderbolt, y0928, set

Alloy case conversion kit for Carson Gas Devil 4x4 (Smartech Titan) only, can be used for all differentials.Comes complete as shown with sealed bearings, installed needle bearings, shims, screws and o-rings.

€89.90*

y0929 HT Aluminum limited slip differential conversion kit for Carson Gas Devil + CRT 4x4, Conrad Hell Devil, Smartech Titan

Genuine HT spare/option part. Alloy case conversion kit for Carson Gas Devil, Carson CRT 4x4, Conrad Hell Devil and Smartech Titan, can be used for the center differential onlyComes complete as shown with sealed bearings, installed needle bearings, shims, screws and o-rings, diff tube and the parts for the slip adjustment device.Adjustment of the locking effect:The adjusting screw which presses on the bevel gear axle and the thrust bearing regulates the locking. This causes friction between the bevel gear and the diff. housing. The locking effect can be adjusted between 0% and about 90%. The adjustment has to be changed according to track surface and dirt accumulation.Loosen the locking effect completely if the track is wet.Contents:1 piece

€129.90*

8485/01 FG Alloy differential adjustable for 1:5 conversion kit - 1pce.

The conversion kit includes all parts needed for a conversion from a standard plastic differential to an adjustable alloy differential.Please note: The differential comes unassembled, we recommend assembly tool

€117.95*

8497 FG Conversion kit differential twofold self-locking

Genuine FG spare/option part. This conversion kit includes all necessary parts to convert the alloy differential 8483/05 or 8485/05 to a double self-locking differential gear.Contents:1 set

€99.50*

8507 FG Differential conversion kit 30° conical

Genuine FG spare/option part. Conversion kits for the alloy differential gears 8500/05 and 8501/05.You achieve an even more effective locking effect through the use of these conical friction surfaces.Contents:1 set

€28.99*

8484 FG Alloy differential for 1:5 and 1:6 conversion kit

Genuine FG spare/option part. The conversion kit includes all parts needed for a conversion from a standard plastic differential to a non-adjustable alloy differential.Content:1 set

€99.99*

8506 FG Differential conversion kit 45° conical

Genuine FG spare/option part. Conversion kits for the alloy differential gears 8500/05 and 8501/05. You achieve an even more effective locking effect through the use of these conical friction surfaces.Contents:1 set

€52.40*

68405/01 FG Alloy differential 4WD conversion kit

Genuine FG spare/option part. Conversion kit for standard differential. Precise, solid and reliable, for use at competitions.Suitable for Off-Road Buggy 4WD RTR, Off-Road Beetle 4WD RTR and Monster/Stadium models 4WD RTR.Contents:1 set

€92.95*

8502 FG Conversion kit fourfold self-locking for differential

Genuine FG spare/option part. This conversion kit includes all necessary parts to convert the alloy differentials 8483/05 or 8485/05 to a quadruple self-locking differential gear.Contents:1 set

€152.95*

Customers also viewed

8485/01 FG Alloy differential adjustable for 1:5 conversion kit - 1pce.

€117.95*

y19751 Tire Tread Cutter

The tire tread cutter is required for re-cutting worn-out or creating new tread designs in order to get more grip. Cutting depth is adjustable and cutting width is approx. 3 mm.Please note: This tool is designed for cutting model tires only, not for any fullsize vehicle tires!Content:1 pieces

€79.90*

8485/05 FG Alloy differential adjustable - 1pce.

Item N° 8485/05 Alloy differential adjustable - 1pce.Adjustable alloy differential, external blocking from 0% to 90%, less slippage at the rear axle. Suitable for all 1:5 models, Race-Trucks and Formula 1 models with horizontal engine.

€153.15*

8492 FG Pressure disk

Genuine FG spare/option part. Suitable for locking differential .Replacement part for 8496Content:1 piece

€3.70*

8491 FG Thrust ball bearing 5x12x4mm - 1pce.

The bearing consists of cage with balls and two housing washers.Spare part for .

€12.90*

8496/02 FG Adjustment screw - 2pcs.

Item N°8496/02 Adjustment screw - 2pcs.Spare part for .Total length: 23 mmThread: M5Pin: 4 mmPart is delivered in silver or black color from vendor!

€5.90*

y0806 SPEED TEC Chung-Yang original 26er EXPERT tuning engine

The SPEED TEC EXPERT genuine Chung-Yang engine is optimized for performance with sophisticated craftsmanship and guarantees, besides greatly increased performance, excellent workmanship and stamina. SPEED TEC EXPERT version modifications: Cylinder: Adjustment of compression; enlarged ports, fuel management milled, machined and polished exhaust and intake. Piston: weight reduced; skirt shortened; oil rings, piston above and below piston ring tapered and piston dome ground. Crankshaft: is adjusted and aligned. Flywheel: weight reduced and checked for runout. Gaskets: use of premium quality gaskets.To achieve the optimum performance gain of a SPEED TEC EXPERT engine, we recommend the use of a tuned pipe ( to the tuned pipes ).

€599.00*