Genuine HT spare/option part. Bearing puller especially for the disassembly of ball bearings from differentials.The arms are reliably fixed at the set distance by an adjustment cone, which makes the use of this puller very easy. The thin hooks allow the use even with little space between ball bearing and differential.Dimensions: Min. opening width: 17 mm Max. opening width: 50 mm Max. height from the Clutch: 25 mmContents:1 piece
We essentially simplyfied the inserting of the differential bevel gear wheels with the mounting tool. Through the exact positioning of the bevel gear wheels it is guaranteed that the differential bevel wheel axle and the differential driving axle are in true alignment from the beginning.
Freaking expensive, but it is damned fine.ASONIC HQ 72-102 is a synthetic high-temperature lubricating grease, for use in limited slip differentials. Due to the careful selection of product components and the clean manufacturing environment, ASONIC HQ 72-102 is a rolling bearing grease with a particularly low noise level.Benefits for your application:High-temperature lubricating grease for rolling bearingsHigh purityLow noiseGood water resistanceContent:1 piece, tube with 30g
Item-No. 69265plastic-wishbone front bottom 2WD/4WD, 530, 2 pcs.Original plastic-wishbone, front bottom.For older 2WD models that are not based on the 4WD models, please refer to Sportsline 2008. or if an RC plate is no longer fitted, check Sportsline 13 in Parts Scout.There you will find the right spare parts for your vehicle.
Item-No. 69266Plastic wishbones up front 2WD/4WD, 530, 2 pcs.Plastic wishbones. up front.For older 2WD models that are not based on the 4WD models, please refer to Sportsline 2008. or if an RC plate is no longer fitted, check Sportsline 13 in Parts Scout.There you will find the right spare parts for your vehicle.
For converting the Sportsline long touring car into a model with 4WD drive. The conversion kit contains all chassis parts and drive parts that are required for the conversion.
Genuine FG spare/option part. Contents:1 pieceFor older 2WD models that are not based on the 4WD models, please refer to Sportsline 2008. or if an RC plate is no longer fitted, check Sportsline 13 in Parts Scout.There you will find the right spare parts for your vehicle.
Item-No. 69270/01Plastic front uprights, 2WD/4WD 530, 2 pcs.Original FG Plastic front uprights.For older 2WD models that are not based on the 4WD models, please refer to Sportsline 2008. or if an RC plate is no longer fitted, check Sportsline 13 in Parts Scout.There you will find the right spare parts for your vehicle.
Genuine FG spare/option part. In details improved aluminium servo saver. Improvement through modification of the slant to 80° for the protective function. According to the regulating power and the number of steering servos the red and blue FG servo saver springs can be assembled. Only suitable for 4WD 1/5 scale.Contents:1 piece
Item N° 69284 Reinforcing plate f.fr.-axle 2WD/4WD, 1:5, 1pce.Original partFor older 2WD models that are not based on the 4WD models, please refer to Sportsline 2008. or if an RC plate is no longer fitted, check Sportsline 13 in Parts Scout.There you will find the right spare parts for your vehicle..
The set includes belt pulley housing right and left, screws. Suitable for Off-Road Buggy 4WD RTR, Off-Road Beetle 4WD RTR and Monster/ Stadium models 4WD RTR, 4WD Porsche.
Solid universal joints made of hardened, high-quality steel for the front axle of Leopard 4 RTR. With ball drive and ball diff. axle. The model has a higher steering deflection and a smoother driving performance in curves if you mount this universal joint.
Item N° 8485/05 Alloy differential adjustable - 1pce.Adjustable alloy differential, external blocking from 0% to 90%, less slippage at the rear axle. Suitable for all 1:5 models, Race-Trucks and Formula 1 models with horizontal engine.
The Sportsline quality at a reasonable price for beginners. For rookies and all those who simply just want to have fun and drive a DTM Audi, Mercedes or a fast Porsche. The Sportsline series is ideal for car modellers whose main focus is not just the chassis, but rather the combination of chassis and body shell.Technical description:The model has a 535 wheelbase. The models are built on a 4mm alloy chassis with double wishbones at front and rear axle. All borings of the alloy chassis are countersunk to prevent the screw heads from bearing out. The models are serial equipped with the 2-damper front axle which guarantees an optimal traction of both front wheels. At the front/rear axle you can adjust through track rods or adjusting screws with right-/left-handed thread the king pin angle, trailing effect and toe-in. Further equipment points are front disk brakes, differential gear, easy-running FG ball drive, alloy brake calliper with big brake disk, stabilizer bar front and rear, tuned pipe muffler, Evo gas tank, rear brace, 24T steel pinion, spark plug cap suppression cover, latest version (Evo) oil-pressure shock absorbers with volume control and external adjusting ring for the initial spring preload. All rotating parts as shafts, axles and clutch bells a.s.o. are supported by ball bearings. You can select the car with complete RTR-equipment from the options menu. RTR-equipment RTR = Ready to Run. The RTR version comes ready to use with the 2,4 GHz rc-system already installed. Transmitter: Reflex Wheel Pro III 2,4 GHzReceiver: Mini BECHigh power servo for throttle and brakeLargescale servo for steeringTx-battery, rx-battery The body shell has four 9mm diameter holes provided by the body shell's manufacturer, which are not suitable for FG models. The models are equipped with a powerful 23ccm combustion engine. The engine needs a 2-stroke petrol oil mixture. One tank filling gives you about 45 minutes driving fun. The power is transmitted over the well-tried system: from the engine over the 2-block clutch over radial tooth wheels on to the rear axle which is equipped with the bevel differential gear with pluggable axles. RC-plate with receiver box.To complete the models all merchantable servos and radio control systems are suitable. The RTR version comes with complete factory installed rc-system, including Ni-Cads! The Audi R8 is currently only available in a painted version with mirrors and rear spoiler.Dimensions: Length: 920 mm Width: 410 mm Height: approx. 250 mm Wheelbase: 535 mm The car comes with an unpainted body shell!HT-Edition? HT-Edition means: this version comes with a big set of spare / option parts included. Steel pinions - Non-standard sizesEach of two different ratios are supplied with.Modul: m=1,5Value: 62,60 EURAlloy engine mount bigCNC machined alloy engine mount, direkt replacement for the stock plastic part, heat and tweak resistant. They come with all necessary hardware included. Value: 64,95 EUR Alloy spur gear carrierUse for 39T - 44 teeth spur gears.Value: 39,90 EUR Ball bearing set, sealed, set of 14The seal rings on sealed ball bearings keep dirt and dust out of the bearings. They are therefore particularly suitable for use in dirty and dusty environments.Value: 59,90 EURTotal value: 227,35 EUR
Genuine FG spare/option part. Alloy differential for 1:5 and 1:6 recommended for competitions. This differential is not adjustable but very solid because of its metal housing. The diff will delivery complete with bevel gears and ball bearings.The big gearwheel and the axle spline drive will not delivery!Content:1 set
Genuine FG spare/option part. Precise, solid and reliable, for use at competitions, not adjustable.Suitable for Off-Road Buggy 4WD RTR, Off-Road Beetle 4WD RTR and Monster/Stadium models 4WD RTR.Content:1 set
Item N° y0495/02 FG manuals set Competition EVO 04 German, 1 pce.Genuine FG manuals as included with the cars.All wheelbases, including Race Truck.
€3.90*
This website uses cookies to ensure the best experience possible. More information.... By clicking on "[Agree / Accept all / etc.]" you also give your consent to the disclosure of your behavior in our store to our partner, shopware AG (Ebbinghoff 10, 48624 Schöppingen, Germany), which cannot assign this data to you personally, but may process it for its own purposes (e.g. product improvements, market behavior analyses).