y0305 Colored flexible fuel line, top quality, 1 meter
High quality flexible fuel line in your choice of blue, red, yellow, orange and green. Size:Length: approx. 1 meterOuter diameter: approx. 6.3 mmInner diameter: approx. 3.2 mmDiameters are 100% identical to the Zenoah Tygon hose #7352!
y0811 After-Run, performance enhancing preservation for all 1/5 and 1/6th scale models, 20 ml
Genuine HT spare/option part. After-Run is a performance enhancing preservation, which ensures that the engine starts properly, even after a long time (winter break) storage. Added to the fuel it keeps the fuel system clean.Among other After-Run conserves the diaphragm of the Walbro carburetor!For long term storage (i.e. during winter!) "vital" for the carburetor diaphragms!For 23 to 32 cm³ engines like Zenoah, Chung Yang, PT, Losi, HPI a.s.o.It binds water in the fuel, particularly important when the engine is not run regularly or after wet races. After-Run improves engine performance, ensures better combustion, removes debris and residues. Simply add the content of the bottle to 5 litres of fuel.Contents:1 piece / 20 ml
Content: 20 Milliliter (€495.00 / 1000 Milliliter)
6349 FG In-tank fuel filter, 1 pce.
Clunk felt filter, protects the carb against debris in the fuel.
y1312 Twin hose bracket
Twin hose bracket for hoses up to 7 mm outer diameter. With 5 mm hole for installation by screw or cable tie.Keeps your car's fuel lines in place. Especially helpfull with tuned pipe layouts running close to the engine.Screws with part number #6726/25 are recommended for installation on the fan cover.
7352 FG Fuel tube for Zenoah, 1 pce.
Spare part for 7348 also suitable for the Losi 5ive-T.Measures:Inner diameter: 3.2 mm Length: 400 mm
y0040 KENT hose quick couplings for all 1/5 & 1/6 cars
The secure hose connection for engine or tank removal! Advantages of the Kent system quick couplings: A safe opening and closing with one hand, as soon as one side is fixed. The design of the "shut-off" valve is a double chamber system, which closes when disconnecting the coupling. (This design enables easy and safe opening of the quick couplings, even under high pressure. Similarly, just as in low pressure applications.) You feel a snap when connecting the couplings, preventing over-tightening or accidental opening. The actions of opening and closing the quick couplings are identical, so that the handling is extremely simple. An ergonomic design guarantees easy handling, yet the space requirement for the couplings is low. Long and safe life of the couplings even with frequent connection and disconnection. In order to protect the fully encapsulated KENT quick coupling system against dirt even after dismantling, sealing the ends with the corresponding white plugs and caps is recommended.
y0686 Rapido the gas station for 1/5 and 1/6 cars
6 litre gas can with thumb activated filler valve.With Rapido filling up is quicker, simpler and more convenient than ever! Thanks to the dosing button you can control the flow of fuel precisely.Unlock by folding out!Press the button and keep control of filling!Lock by folding in again. Finished!No spills, no awkward handling, all clean and easy Other:Half round spout for ventilation and visibility suitable also for the smallest tank openingsLarge opening for easy fillingFlow controlled by press-buttonVentilation allows full flowSturdy design with two handlesTransparent 6 litre container with litre indication in the filling and rest positionsContents:1 piece
7348 FG/Carson/Smartech Tank complete without ventilation - 1pce.
Suitable for all FG/Carson/Smartech cars except FG Evo and Carson 4WD.Please note that tank mount 7143 is required for installation. Installation in a Carson/Smartech 1/6 off-road car requires drilling of two new 4.5 mm diameter holes into the chassis plate. Drilling template is included.Comes as shown with fuel lines, grommet and gas cap included.
y0827 Spout for gas cans, 1 pce.
Spout, fits the standard gas cans, for a spill-free gas up. For gas cans with the following thread size: diameter 37 mm x pitch 5 mm.Compatible with Marder tanks as well!
y1478 pump for re-fueling and de-fueling
The pump will fill and empty the fuel tank within seconds.The pump has a vent valve to avoid overpressure. Do not store gasoline for longer than 60 minutes in the gun.Occasionally lubricate the rubber seal of the piston with some grease. To do this, the handle-side cap of the cylinder can be unscrewed and the pump can be disassembled.The clear hose has been blackened in the picture for presentation purpose only.Color: blue.Filling capacity:500 mlContent:1 piece
LOSB5015/set Losi Gas Tank 5ive-T, 5ive-T 2.0, TLR 5ive-B and Mini, complete incl. mounting set
Genuine Losi spare/option part. Since quite a few of our customers order the Losi 5ive-T 2.0 with brushless drive, we have several genuine tank sets with mounting brackets included from this conversion in stock. Therefore we put them on sale at an exceptionally low price.The regular price for this set of spare parts is 84.50 .Complete set with tank, ventilation and fuel hose, tank pendulum, mounting brackets and screw-on fuel cap.Tank capacity: 800 ml.Content:1 set
8381/05 FG Tank venting valve, 1pce.
Item N° 08381/05 Tank venting valve, 1pce.Small handy vent valve for the fuel tank ventilation. Replaces the previously used vent hoses.
AT-AT001 ATOP Colored high flow fuel line with connections and accessories for Losi 5ive-T/2.0/B, Mini and HPI models
Genuine Atop spare/option part. Colored fuel hose with clams and suction tubesArea Rc High flow fuel line kit.This high flow fuel line kit fits the HPI Baja series and the Losi 5ive-T/B and Mini. It may fit other large scale cars as well.The kit comes with 6 pieces of fuel line clips and 2 assembled plastic fittings. Those fittings cannot be compressed by the tanks fuel line grommet, so the inner diameter remains constant which improves fuel delivery to the carb.Fuel line dimensions:Length: 1mInside diameter: 3 mmOuter diameter: 6 mmAvailable colors: AT001/01 - YellowAT001/02 - RedAT001/03 - BlueAT001/05 - GreenIncludes:2 x Assembled plastic fittings6 x Fuel line clipsTygon fuel line
5800 Mielke quick fill fuel cap system for FG/ Mecatech tank
Genuine Mielke spare/option part. The quick fill fuel tank cap has a threaded shank to screw it into the filler neck. An O-ring seals the connection. The cap can be turned into the desired position and will be locked there by screws.Fits FG and Mecatech tanks.Contents:1 piece
8381/06 FG Tank venting
Genuine FG spare/option part. Very efficient tank venting also for high fuel temperatures, with each 1 valve for ventilation and aeration. Suitable for all fuel tanks of large scale models.
6855 FG Fuel can 5l
Genuine FG spare/option part.Colour: oliveContents: 5lDimensions total:Height: 260 mmLength: 260 mmWidth: 150 mmThread: Diameter 37 mm x pitch 5 mmContents:1 piece
8383 FG Fuel tank 800ml with quick acting closure, 1 pce.
Item N° 08383 Fuel tank 800ml with quick acting closure, 1 pce.800 ml fuel tank with snap closure, ventilating valve, fuel filter and fuel hoses.Dimensions:Lenght: 130 mmWidth: 100 mmHeight: 100 mmVolume: 800 ml
7351 FG Tank cap for Zenoah tank - 1pce.
Spare part for 7348Outer diameter 43 mmHeight 20 mm
y1491/01 Fuel tank breather cap
Genuine HT spare/option part.Small aluminum breather cap for easy installation at the end of the breather hose, common on many tanks. It allows ventilation of the tank and keeps dirt from entering the breather hose.Color: silverContents:1 piece
305210, s054065 Fuel tank Carson / Smartech 4x4, 1 pce.
Item N° 305210, s054065 Fuel tank Carson / Smartech 4x4, 1 pce.
BJ088 GPM Aluminum fuel tank cap Losi 5ive-T/2.0, Mini and HPI Baja, Carson Wild GP Attack
High quality cnc machined parts made by GPM Racing Products from high strength billet aluminum. Fits Carson Wild GP Attack, Losi 5ive-T, Mini and HPI Baja fuel tanks.Content:1 pieces
8385 FG fuel tank lid set
Genuine FG spare/option part.This fuel cap tuning seal ensures a perfect seal of your fuel tank (items 8380/06, 8380/08 are not included).Drill with an 8 mm hole through the tank lid. Insert seal # 8384/02 into the neck of the lid.Insert seal # 8380/06 along with the aluminum cover with sealing ring into the plastic lid (# 8380/08).Tighten the complete assembly with the included nut, and finally add vent fitting # 8381/03.Reinstall the lid onto the tank.Content:1 set