8381/05 FG Tank venting valve, 1pce.
€12.90
Available
Product information "8381/05 FG Tank venting valve, 1pce."
Tank venting valve, 1pce.
Small handy vent valve for the fuel tank ventilation. Replaces the previously used vent hoses.
0 of 0 reviews
Average rating of 0 out of 5 stars
Login
Accessories / Spare parts
High quality flexible fuel line in red. Size:Length: approx. 1 meterOuter diameter: approx. 6.3 mmInner diameter: approx. 3.2 mmDiameters are 100% identical to the Zenoah Tygon hose #7352!
High quality flexible fuel line in green. Size:Length: approx. 1 meterOuter diameter: approx. 6.3 mmInner diameter: approx. 3.2 mmDiameters are 100% identical to the Zenoah Tygon hose #7352!
High quality flexible fuel line in orange colored. Size:Length: approx. 1 meterOuter diameter: approx. 6.3 mmInner diameter: approx. 3.2 mmDiameters are 100% identical to the Zenoah Tygon hose #7352!
Customers also bought
Genuine FG spare/option part. Recommended accessory for installation of tuned pipes using teflon tube connectors. Contrary to standard hose clamps this version is self-readjusting down until 20 mm inner diameter!Width 12 mm.Content:2 pieces
This pair of Tyres have the following use indications: HIGH GRIP situation for clean track. HIGH GRIP situation for big asphalt. HIGH GRIP situation for high temperatures. This pair of Tyres have the following technical features: REVO treated profile for the maximum traction and the maximum lateral grip. Treated profile studied to maintain the tyre surface alway clean from rubber murble. Compound exclusively developped for model tyres. Inside belt flexible but very strong, vulcanized directly together with tyre compound. Insert foam with special material for high temperatures, for maximum stability and high drive precision. Spoked wheel moulded with special material for high temperatures for maximum grip and stability. Special gluing system 100% guaranteed.The main sizes for this tyre are: WHEEL fixing with square 18mm. TYRE outside diameter 118mm. WHEEL inside diameter 90mm. TYRE tota width 65mm. Note:The harder a tire compound - the longer it lasts, but the more moderate the performance.The softer a tire compound - the better the performance, but the lower the durability. Hint!As a rule, the same tires can be used for front and rear.If the vehicle tends to oversteer, this can be avoided by using a harder front tire!In wet conditions you should use a rain tire which offers maximum grip under these circumstances.With the use of Magic Rain, a tire traction compound, the grip can be further improved.Check your tires after driving! It can happen that a tire starts to detach from the rim, in this case you should glue this spot immediately with our tire repair kit (y0067), otherwise the tire could detach completely from the rim.So find out which tire is the best for you!
Genuine Top Tuning spare/option part. Top Tuning The 20-amp Bigscale switch allows for a maximum input voltage of 30 volt. It is specifically designed as a receiver switch for use in combination with the Hitec HS-1005SGT servo and 4s receiver battery. The switch can also be used for other applications at your discretion with batteries up to 6S.Note: Top Tuning the electronic 20 amp Bigscale high voltage switch delivers the batterys full voltage. It does not replace a voltage regulator! The components which follow down the line (voltage regulator / servos / receiver) must be matched to this voltage! Using the latest MOSFET technology allows the 20 amp Bigscale high voltage switch to handle extreme loads, despite its small size. A blue LED status light clearly displays the activated mode. The 20 amp Bigscale high voltage switch is dust-and splash protected. He has an extremely low internal resistance and very low power consumption in off mode. Nevertheless it is recommended to unplug the battery when the model will not be used for an extended period. Properties:Voltage range: 3 to 30 VLoad: 20 ampsStandby consumption: 17 µAOperating temperature: - 15 ° C to +50 ° CCable length:Battery side 250 mmReceiver side 130 mmWeight: 13 gramsDimensions:Length: 29 mm Width: 13 mmHeight: 12 mmContents:1 piece
9541/05 FG brake caliper for FG Leo 2020 intermediate shaft brake, 1 pc.
Genuine Speed-Tec spare/option part. SPEED TEC tuning flywheel for Zenoah G230/240/260/270/290/320 and Chung Yang engines (includes HPI Fuelie and Losi).The weight reduced (210 vs. 230 grams) flywheel enables the engine to accelerate faster and rev higher. The optimal balancing guarantees better endurance at lower fuel consumption!A durability approval exists!Contents:1 piece
Customers also viewed
Genuine HT spare/option part.Small aluminum breather cap for easy installation at the end of the breather hose, common on many tanks. It allows ventilation of the tank and keeps dirt from entering the breather hose.Color: silverContents:1 piece
Genuine FG spare/option part. Very efficient tank venting also for high fuel temperatures, with each 1 valve for ventilation and aeration. Suitable for all fuel tanks of large scale models.
Twin hose bracket for hoses up to 7 mm outer diameter. With 5 mm hole for installation by screw or cable tie.Keeps your car's fuel lines in place. Especially helpfull with tuned pipe layouts running close to the engine.Screws with part number #6726/25 are recommended for installation on the fan cover.
Genuine FG spare/option part.Fits formula 1 cars only.
The safety fuel filling system is perfect for refueling all common fuel tanks and fits all common jerry cans up to 5 liters. The integrated ventilation of the fueling system allows a gurgling-free pouring. In addition, the automatic filling stop prevents fuel overflow and spillage.The environmentally friendly filling system reduces the escape of fuel vapors during and after refueling and thus protects against contamination. A union nut is included for exact positioning of the system at small tank openings. In addition, the filler is equipped with a retaining loop so that it can be securely attached to the jerry can.Safety Fuel Filling Systemno overflow and spillageThe automatic filling stop prevents overflow and spillage.Gurgling-free refuelingThanks to the integrated ventilation, gurgling-free refueling is possible at last and the escape of environmentally harmful fuel vapors is reduced.Integrated lid attachmentThe integrated lid fastening prevents loss, which is especially useful for mobile use.Lid lockingNo more losing the cap. Lid lock is directly connected to the can.VentilationGurgling-free refueling. Reduction of escape of environmentally harmful fuel vapors.Made in GermanyThe filling system is manufactured in Germany. Overview: Safety nozzle filling system for fuel With integrated ventilation for refueling without gurgling Reduction of escape of environmentally harmful fuel vapors Integrated automatic filling stop to prevent overflow and spillage With union nut for exact positioning of the system With captive screw connection Practical strap for attachment to the jerry can included Made in Germany Filling opening: ø inside = 29 mm, thread outside ø = 38 mm Nozzle: ø outside = 21 mm, length = 160 mm Material: Polyethylene (HD-PE) Color: black/red Content:1 x Safety fuel filling system