66217 FG Steel pinion 14T narrow, 1pce.
Item N° 66217 Steel pinion 14T narrow, 1pce.Layshaft pinion for FG 4WD cars, 10 mm bore diameter, tooth width 9.25 mm, total width 15.6 mm, outer diameter 25.7 mm.Module: m=1,5Profile regraded, this means that the number of teeth is changed while the diameter remained constant. The part of the involute curve that defines the tooth profile is changed. Positively regraded (lower number of teeth) pinions are stronger and run smoother, the reduced strength of negatively regraded pinions doesn't really matter.
TT1021/07 Top Tuning electric Motor pinion nitrided hardened, 8 mm bore, module 1.5
Genuine Top Tuning spare/option part. Motor pinion made of nitrided hardened steel, module 1.5 and 8 mm bore. Reinforced hub for set screw M5x6. The pinions with odd tooth counts are profile shifted. Within the same outer diameter, there is no need to adjust the backlash when changing the pinion. When mounting on vehicles with mounting holes in the motor mount that are specific to the tooth count, the mounting holes for the higher number of teeth in each case (16 or 18) must be used.Profile regraded:This means that the number of teeth is changed while the diameter remained constant. The part of the involute curve that defines the tooth profile is changed. Positively regraded (lower number of teeth) pinions are stronger and run smoother, the reduced strength of negatively regraded pinions doesn´t really matter. Available in two sizes with two tooth counts:Outer diameter 30 mm with 17T or 18TOuter diameter 27 mm with 15T or 16TContents:1 piece
LOSB5045 Losi 20T Pinion Gear, 1.5M & Hardware 5ive-T/2.0, TLR 5ive-B und Mini WRC
Genuine Losi spare/option part. Fits Losi 5ive-T, TLR 5ive-B and 5ive Mini WRC.Technical info:Modul: 1,5Teeth: 20 piecesContents:1 piece
305191 / s054045 Bevel gear 16T center Carson / Smartech 4x4
Genuine Smartech spare/option part.Module: m=1,5.Content:1 piece
66217/01 FG Steel pinion 15T narrow, 1pce.
Item N° 66217/01 Steel pinion 15T narrow, 1pce.Layshaft pinion for FG 4WD cars, 10 mm bore diameter.Module: m=1,5
SSB018T GPM Motor pinion Super Baja Rey / 2.0 / Rock Rey, 18 teeth
Genuine GPM spare/option part. GPM 18T steel motor pinion for Losi Super Baja Rey / Rock Rey, also suitable for other models at your own discretion. Module 1.5 mm, bore for 8 mm shaft.We supply the pinion exclusively in a nitride hardened version. This curing has already proved extremely successful with the GPM clutch bell pinions for the Losi 5ive models and ensures significantly increased wear resistance.Contents:1 piece
LOS252065 Losi Pinion Gear, 14T, 1.5M, 8 mm Shaft
Genuine Losi spare/option part. Contents:1 piece
LOS252064 Losi Pinion Gear, 13T, 1.5M, 8 mm Shaft
Genuine Losi spare/option part. Contents:1 piece
GPM SLO5T 16/18/20/21 steel pinion incl. washer for Losi 5ive-T, 5ive-B and Mini
Hardened steel pinion set for Losi 5ive-T, 5ive-B and Mini, with corresponding engine mount inserts included. All parts with laser etched tooth count.Please note: The pinion do fit the 5ive-T 2.0 as well, of course. However, you then have to use the 5ive-T 2.0 engine mount inserts of the appropriate tooth count, inserts from the 5ive-T do not fit! Available with 16, 18T/20T/21T. The 19T pinion is stock equipment in Losi 5ive-T and Mini, 20T is stock in the 5ive-B.The 16T pinion is profile shifted and has the same dimensions as a normal 18T pinion.It is specially made for vehicles where the stock tires are replaced by much larger diameter rubber (i.e. monster truck tires and MadMax Giant Grip).Profile regraded, this means that the number of teeth is changed while the diameter remained constant. The part of the involutes? curve that defines the tooth profile is changed. Positively regraded (lower number of teeth) pinions are stronger and run smoother, the reduced strength of negatively regraded pinions doesn´t really matter.SLO5T018T replaces LOSB5046 and LOSB5805SLO5T019T replaces LOSB5044 and LOSB5801SLO5T020T replaces LOSB5045 and LOSB5802The higher the tooth count, the higher the top speed!
LOSB5044 Losi 19T Pinion Gear, 1.5M & Hardware 5T, TLR 5ive-B and Mini WRC
Genuine Losi spare/option part.Fits Losi 5ive-T, TLR 5ive-B and 5ive Mini WRC.Dimensionally identical with B55029Contents:1 piece
LOS252016 20T Pinion Gear Losi DBXL 1/5 4WD
Genuine Losi spare/option part. Contents:1 piece
LOS252042 Losi Steel Pinion Gear, 19T, MOD 1.5: 6IX
Genuine Losi spare/option part. Contents:1 piece
6047/01 FG Steel pinion 15 teeth wide, 4WD
Genuine FG spare/option part. True running steel pinion for minimized wear. Application: All FG cars except Formula 1.Dimensions:Diameter: 26,7 mmBore: 10 mmTotal width: 18 mmTooth width: 11.5 mmModule: m=1,5Profile regraded, this means that the number of teeth is changed while the diameter remained constant. The part of the involutes? curve that defines the tooth profile is changed. Positively regraded (lower number of teeth) pinions are stronger and run smoother, the reduced strength of negatively regraded pinions doesn?t really matter.Contents:1 piece
305203 / s054058 Bevel gear diff, front or rear, 44T Carson / Smartech 4x4
Genuine Smartech spare/option part.Module: m=1,5.Content:1 piece
LOS352010 Losi Pinion Gear, 19T, 1.5M & Hardware DBXL 2.0
Genuine Losi spare/option part. Contents:1 piece
ARA311126 ARRMA Pinion Gear, 38T Mod1, Safe-D8
Genuine ARRMA spare/option part. This tough steel 38T Mod1 Safe-D8 Pinion Gear is the perfect part to carry in your RC tool box Features: Strong and durable steel for long-lasting performance in extreme RC conditions Precision manufactured wide tooth profile for smooth operation 'D' shaped hole to match motor shaft profile so drive and brakes are not lost if the set-screw backs-out Suits 8mm motor shaft diameter Precision manufactured threaded set-screw hole E-clip supplied for motor shaft pinion retention Includes 1 x Pinion Gear 1 x Set Screw - M4 x 4mm 1 x E-Clip - 6mm
LOS252039 Losi Pinion 16 teeth for Super Rock Rey
Genuine Losi spare/option part. Contents:1 piece
305177, s054026, Bevel gear center diff 57T Carson / Smartech 4x4, 1 pce.
Module: m=1,5
ARRMA Motor pinions for Kraton, 8mm shaft / Outcast 8S
Genuine ARRMA spare/option part.Module 1.0 Contents:1 pieces
ARA311125 ARRMA Pinion Gear, 37T Mod1, Safe-D8
Genuine ARRMA spare/option part. This tough steel 37T Mod1 Safe-D8 Pinion Gear is the perfect part to carry in your RC tool box Features: Strong and durable steel for long-lasting performance in extreme RC conditions Precision manufactured wide tooth profile for smooth operation 'D' shaped hole to match motor shaft profile so drive and brakes are not lost if the set-screw backs-out Suits 8mm motor shaft diameter Precision manufactured threaded set-screw hole E-clip supplied for motor shaft pinion retention Includes 1 x Pinion Gear 1 x Set Screw - M4 x 4mm 1 x E-Clip - 6mm
ARA311129 ARRMA Pinion Gear, 34T Mod1, Safe-D5
Genuine ARRMA spare/option part. This tough steel 34T Mod1 Safe-D5 Pinion Gear is the perfect part to carry in your RC tool box Features: Strong and durable steel for long-lasting performance in extreme RC conditions Precision manufactured wide tooth profile for smooth operation 'D' shaped hole to match motor shaft profile so drive and brakes are not lost if the set-screw backs-out Suits 8mm motor shaft diameter Precision manufactured threaded set-screw hole E-clip supplied for motor shaft pinion retention Includes 1 x Pinion Gear 1 x Set Screw - M4 x 4mm 1 x E-Clip - 6mm
ARA310972 ARRMA 25T HD Mod1 Pinion Gear for Kraton / Outcast 8S
Genuine ARRMA spare/option part. Contents:1 pieces
ARA310963 ARRMA 16T HD Mod1 Pinion Gear for Kraton / Outcast 8S
Genuine ARRMA spare/option part. Contents:1 pieces
ARA310964 ARRMA 17T HD Mod1 Pinion Gear for Kraton / Outcast 8S
Genuine ARRMA spare/option part. Contents:1 pieces