Skip to main content Skip to search Skip to main navigation
EXTRA 20% off Outlet*. Use Code: EXTRA20 at checkout!!
+49 2151 820200 Mon-Fri 9 am - 6 pm, Sa 9 am - 1 pm

305203 / s054058 Bevel gear diff, front or rear, 44T Carson / Smartech 4x4

Product information "305203 / s054058 Bevel gear diff, front or rear, 44T Carson / Smartech 4x4"

Genuine Smartech spare/option part.

Module: m=1,5.

Content:
  • 1 piece

0 of 0 reviews

Average rating of 0 out of 5 stars

Leave a review!

Share your experiences with other customers.


Similar products

Average rating of 0 out of 5 stars

66217 FG Steel pinion 14T narrow, 1pce.
Item N° 66217 Steel pinion 14T narrow, 1pce.Layshaft pinion for FG 4WD cars, 10 mm bore diameter, tooth width 9.25 mm, total width 15.6 mm, outer diameter 25.7 mm.Module: m=1,5Profile regraded, this means that the number of teeth is changed while the diameter remained constant. The part of the involute curve that defines the tooth profile is changed. Positively regraded (lower number of teeth) pinions are stronger and run smoother, the reduced strength of negatively regraded pinions doesn't really matter.

€29.95*

Average rating of 0 out of 5 stars

6047/01 FG Steel pinion 15 teeth wide, 4WD
Genuine FG spare/option part. True running steel pinion for minimized wear. Application: All FG cars except Formula 1.Dimensions:Diameter: 26,7 mmBore: 10 mmTotal width: 18 mmTooth width: 11.5 mmModule: m=1,5Profile regraded, this means that the number of teeth is changed while the diameter remained constant. The part of the involutes? curve that defines the tooth profile is changed. Positively regraded (lower number of teeth) pinions are stronger and run smoother, the reduced strength of negatively regraded pinions doesn?t really matter.Contents:1 piece

€31.90*

Average rating of 0 out of 5 stars

305191 / s054045 Bevel gear 16T center Carson / Smartech 4x4
Genuine Smartech spare/option part.Module: m=1,5.Content:1 piece

€27.90*

Average rating of 0 out of 5 stars

66217/01 FG Steel pinion 15T narrow, 1pce.
Item N° 66217/01 Steel pinion 15T narrow, 1pce.Layshaft pinion for FG 4WD cars, 10 mm bore diameter.Module: m=1,5

€29.95*

Average rating of 0 out of 5 stars

HT-Steel pinion for Carson / Smartech 4WD cars
ritzel_gas_devil Size: y0344 - 40 teeth
Genuine HT spare/option part. Nitrited steel gears, fit Carson Gas Devil / Smartech Thunderbolt 4x4 only.These gears are available with 37T or 40T, both share the same diameter and must be used in combination.Please note: the gears cannot be used in combination with the stock gears and the 37T version is no replacement for the stock 37T gear!This gives you the following new gear ratios:I=10.58I=9.79 (when using two identical gears !)I=9.06The stock gear ratio is I=11.38 and I=8.42 is possible by switching the gears.Module: m=1,5Profile regraded, this means that the number of teeth is changed while the diameter remained constant. The part of the involutes? curve that defines the tooth profile is changed. Positively regraded (lower number of teeth) pinions are stronger and run smoother, the reduced strength of negatively regraded pinions doesn?t really matter.Contents:1 piece

€44.90*

Average rating of 0 out of 5 stars

305177, s054026, Bevel gear center diff 57T Carson / Smartech 4x4, 1 pce.
Module: m=1,5

€34.90*

Average rating of 0 out of 5 stars

305167 / s054013 Spur gear 43T Carson / Smartech 4x4
Genuine Smartech spare/option part.Module: m=1,5.Content:1 piece

€27.90*

Average rating of 0 out of 5 stars

y0968 HT-Steel pinion 34 teeth Speedgear for Carson / Smartech 4WD cars
Genuine HT spare/option part. Nitrited steel spur gear, profile regraded, for combination with the stock 43T spur gear which goes on the clutch bell. This gives a numerically lower drive ratio and makes it possible to use standard diameter buggy tires on this car!Attention: The speedgear has the same diameter as the stock 37T gear and is therefore not compatible with the other 37T/40T HT tuning gears!Speedgear 34T: I=7,74Module: m=1,5Profile regraded, this means that the number of teeth is changed while the diameter remained constant. The part of the involutes? curve that defines the tooth profile is changed. Positively regraded (lower number of teeth) pinions are stronger and run smoother, the reduced strength of negatively regraded pinions doesn´t really matter.Contents:1 piece

€44.90*

Average rating of 0 out of 5 stars

305168 / s054014 Spur gear 37T Carson / Smartech 4x4
Genuine Smartech spare/option part.Module: m=1,5.Content:1 piece

€27.90*

Customers also viewed

Average rating of 0 out of 5 stars

LOS250048 Losi Body Brenthel and Front Grill, King for Super Baja Rey / 2.0
Genuine Losi spare/option part. Contents:1 pieces

€169.99*

Average rating of 0 out of 5 stars

y0692 HT-Gearset for layshaft and differential fine pitch for 1/5 onroad
Genuine HT spare/option part.Fine pitch gears for layshaft and differential, for competition use in touring car and GT models only. The gears run smoother and quieter than the stock parts, reducing the car's rolling resistance.Module: m=1Fits FG and Smartech / Carson cars. Only for use as a set, not in combination with standard pitch gears!Contents:2 pieces

€79.90*

Average rating of 0 out of 5 stars

EL011 FID-Racing gilmer belt pulley, large
Genuine FID Racing spare/option part.Replacement part for FID-Racing electric starter with the order number: FID046.Content:1 piece

€31.30*
Loading...
Upload in progress, please be patient ...
Shopware-Agency Shopware-Theme Development