TT1104 Top Tuning electric motor pinion nitrided, 8 mm bore, module 1 such as for ARRMA cars

€34.90*

Prices incl. VAT plus shipping costs

Available

tt_tt1104 Version

Product number: tt_tt1104.1

Product information "TT1104 Top Tuning electric motor pinion nitrided, 8 mm bore, module 1 such as for ARRMA cars"

Genuine Top Tuning spare/option part.

Motor pinion made of nitrided steel, module 1 (such as for ARRMA cars) and 8 mm bore. Reinforced hub for set screw M5x6.

The 26T pinion is profile shifted. Within the same outer diameter, there is no need to adjust the backlash when changing the pinion.

Profile regraded:

This means that the number of teeth is changed while the diameter remained constant. The part of the involute curve that defines the tooth profile is changed. Positively regraded (lower number of teeth) pinions are stronger and run smoother.

Outer diameter 30 mm, Tooth width 13 mm, 26T or 28T.

Contents:

1 piece

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

No reviews found. Share your insights with others.

Accessories / Spare parts

y0113 Thread locking compound

Genuine HT spare/option part.Available as 272 high strength and heat resistant, 270/1 high strength or 241 medium strength.The strength of 272 and 270/1 is comparable, but 272 can handle temperatures up to 230°C vs. 150°C for 270/1. It is therefore the perfect choice for applications like exhaust or clutch pinion bolts. However, curing of 272 takes at least twice as long as 270/1.An excellent recommendation for removal of screws treated with threadlocking compound:CFH Diamant M50 Gasbrenner, y1007 Contents:1 piece / 10 gram

Content: 10 Gramm (€790.00* / 1000 Gramm)

€7.90*

Details

Kunden haben auch gesehen

ARAC9891 ARRMA Flat Head Screw 4x12mm for Kraton / Outcast 8S

Genuine ARRMA spare/option part. Contents:2 pieces

€4.99*

TT1104 Top Tuning electric motor pinion nitrided, 8 mm bore, module 1 such as for ARRMA cars

Genuine Top Tuning spare/option part. Motor pinion made of nitrided steel, module 1 (such as for ARRMA cars) and 8 mm bore. Reinforced hub for set screw M5x6.The 26T pinion is profile shifted. Within the same outer diameter, there is no need to adjust the backlash when changing the pinion.Profile regraded:This means that the number of teeth is changed while the diameter remained constant. The part of the involute curve that defines the tooth profile is changed. Positively regraded (lower number of teeth) pinions are stronger and run smoother.Outer diameter 30 mm, Tooth width 13 mm, 26T or 28T.Contents:1 piece

€34.90*

TT1028 Top Tuning High-performance fan 60 x 60 x 24 mm

Genuine Top Tuningspare/option part. High performance fan as upgrade for various applications in electric models.The size 60 x 60 x 24 mm can be swapped e.g. for the fan of the ZTW Beast 300A speed controller. For this particular application, M4x40 screws are required instead of the standard M4x30 screws due to the 9 mm taller fan.The air flow is considerably higher than with the standard units!The operating voltage of the fan with 5 - 8.4 V is perfectly adapted to these requirements. Technical data: Dimensions: 60 x 60 x 24 mm Operating voltage: 5 8.4 V Current: 0.5A Speed: 8,500 rpm @ 8.4 V Air flow: 39.2 cfm Connector: BEC female Cable length: approx. 30 cm Contents:1 piece

€19.90*

LOS254069 Losi Shock Stand Off, Front, Super Baja Rey 2.0

Genuine Losi spare/option part. Contents:2 pieces

€19.99*

TT1021/07 Top Tuning electric Motor pinion nitrided hardened, 8 mm bore, module 1.5

Genuine Top Tuning spare/option part. Motor pinion made of nitrided hardened steel, module 1.5 and 8 mm bore. Reinforced hub for set screw M5x6. The pinions with odd tooth counts are profile shifted. Within the same outer diameter, there is no need to adjust the backlash when changing the pinion. When mounting on vehicles with mounting holes in the motor mount that are specific to the tooth count, the mounting holes for the higher number of teeth in each case (16 or 18) must be used.Profile regraded:This means that the number of teeth is changed while the diameter remained constant. The part of the involute curve that defines the tooth profile is changed. Positively regraded (lower number of teeth) pinions are stronger and run smoother, the reduced strength of negatively regraded pinions doesn´t really matter. Available in two sizes with two tooth counts:Outer diameter 30 mm with 17T or 18TOuter diameter 27 mm with 15T or 16TContents:1 piece

Variants from €24.90*

€32.90*

TT1021/07 Top Tuning electric Motor pinion nitrided hardened, 8 mm bore, module 1.5

Genuine Top Tuning spare/option part. Motor pinion made of nitrided hardened steel, module 1.5 and 8 mm bore. Reinforced hub for set screw M5x6. The pinions with odd tooth counts are profile shifted. Within the same outer diameter, there is no need to adjust the backlash when changing the pinion. When mounting on vehicles with mounting holes in the motor mount that are specific to the tooth count, the mounting holes for the higher number of teeth in each case (16 or 18) must be used.Profile regraded:This means that the number of teeth is changed while the diameter remained constant. The part of the involute curve that defines the tooth profile is changed. Positively regraded (lower number of teeth) pinions are stronger and run smoother, the reduced strength of negatively regraded pinions doesn´t really matter. Available in two sizes with two tooth counts:Outer diameter 30 mm with 17T or 18TOuter diameter 27 mm with 15T or 16TContents:1 piece

Variants from €24.90*

€32.90*