Skip to main content Skip to search Skip to main navigation
EXTRA 20% off Outlet*. Use Code: EXTRA20 at checkout!!
+49 2151 820200 Mon-Fri 9 am - 6 pm, Sa 9 am - 1 pm

PMT Supreme - S00 (K00) Tyres, soft

Product information "PMT Supreme - S00 (K00) Tyres, soft"

PMT tire chart from the current series divided into 3 categories

1) Parking lot / hobby

The durability of the tire is the main focus here.

2) Race track / hobby

Here you will find the tire that offers a compromise of durability and performance.

3) Race track / competition

Here the racer will find the tires for best lap times on a race track and to win races.

Note:

The harder a tire compound - the longer it lasts, but the more moderate the performance.
The softer a tire compound - the better the performance, but the lower the durability.

Hint!

As a rule, the same tires can be used for front and rear.

If the vehicle tends to oversteer, this can be avoided by using a harder front tire!

In wet conditions you should use a rain tire which offers maximum grip under these circumstances.

With the use of Magic Rain, a tire traction compound, the grip can be further improved.

Check your tires after driving! It can happen that a tire starts to detach from the rim, in this case you should glue this spot immediately with our tire repair kit (y0067), otherwise the tire could detach completely from the rim.

So find out which tire is the best for you!

Genuine PMT spare/option part.

The Supreme have been designed for all track conditions. Developed with latest generation components, deriving directly from the highest level of Motorsport, they are available in three hardnesses:
  • SS "NEW": supersoft, 35 shore hardness, suitable for rear and slightly abrasive asphalts
    • S00 (K00): soft, 38 shore hardness, suitable for rear and slightly abrasive asphalts
    • M00/P1 (K01): medium, 42 shore hardness, suitable for rear / front and medium abrasive asphalts
    • H00/P1 (K03): hard, 45 shore hardness, suitable for front and very abrasive asphalts

    On this type of tyres a new lighter and harder rim will be used, designed to withstand 25% higher lateral forces, compared to existing ones.
    Moreover, even the filling mousse has been updated and can now withstand up to a temperature of 130 °, without altering its mechanical characteristics.

    Dimension:

    • Outside diameter: approx. 116 mm
    • Width: approx. 65 mm
    • Rims: 18 mm square drive


    Contents:
    • 2 pieces


0 of 0 reviews

Average rating of 0 out of 5 stars

Leave a review!

Share your experiences with other customers.


Customers also bought

Average rating of 0 out of 5 stars

4411/06 FG bearing set with grease filling EVo/Competition
Genuine FG spare/option part. FG ball bearing with heat resistant grease filling up to 180°. Therefore essentially improved durability of the wheel bearings and the clutch bell.For all FG cars with alloy differential case except 4WD and Formula 1.Contents:Eight pieces: 8 x 22 x 7 mmTwo pieces: 10 x 22 x 6 mmTwo pieces: 10 x 19 x 7 mmTwo pieces 15 x 28 x 7 mm

€35.95*

Average rating of 0 out of 5 stars

7395/01 FG Carburetor support high for Zenoah G230/260/240/270 - set
This carburetor supoort sits beneath the air filter and prevents therefore widely arising vibrations.

€17.90*

Average rating of 0 out of 5 stars

y0481 Various Zenoah Label, 1 St.
y0481 y0481 Diverse Zenoah Label, 1 St.: y0481/01 G230RC Zenoah Label
Glossy Zenoah stickers.

€4.90*

Average rating of 0 out of 5 stars

7388 FG Gasket kit Zenoah G230/G260R, CY
Genuine FG spare/option part. Gasket kit for the Zenoah engines G230 and G260RC. Actual product may be of different color. We have no bearing on this since we are not the manufacturer.Set includes the following parts:7332 Silencer gasket for CY / Zenoah7335 Insulator gasket for CY / Zenoah7337 Carburetor gasket for Zenoah, CY7305/08 Crankcase gasket for CY / Zenoah 7306/09 Special Cylinder foot gasket CY / Zenoah Please note:It is recommended to use a gasket sealer with every gasket on an engine. This gives better sealing anda longer lasting gasket. We also recommend:y0804 HT-flange sealer 518 y0994 Marston sealery0807 MD-Sil RTV silicone sealer

€16.90*

Average rating of 0 out of 5 stars

y19031/01 Silicone exhaust hose extrem reinforced 22/30 mm
Genuine HT spare/option part. Very strong, multiple glas fiber layers, nevertheless very stretchable. Resist maximum temperatures up to 250°C (482°F) from.Needs hose clamps with at least 35 mm inner diameter! Maße:Inside diameter: 22 mm Outside diameter: 30 mmWall thickness: 4 mmLength: 50 mmContents:1 piece

€9.90*

Customers also viewed

Average rating of 0 out of 5 stars

- PMT - Supreme V4-Q01 (Super Soft)
Exciting news for the modeling world: Introducing the new 1:5 Supreme V4.With a fresh design and innovative tread patterns for even higher performance. We are thrilled to present the 1:5 Supreme V4 – our revolutionary tire for the world of four-wheeled modeling. The new V4 aims to raise the bar in competitions and cater to the needs of drivers. It features a redesigned tread with new patterns meticulously crafted for enhanced performance.  Let’s see its key features: Exceptional Grip: Advanced tread patterns for unparalleled traction on various asphalt conditions. Simplified Driving: Superior control for a smoother and more effective driving experience. Enhanced Durability: Thanks to the new tread design, the tire’s performance remains consistent even in longer sessions. Available in Three Different Compounds.  Like all our products, the V4 is available in various compounds to accommodate different asphalt conditions: - Q01 – SuperSoft - Q03 – Soft - Q05 – Medium Note:The harder a tire compound - the longer it lasts, but the more moderate the performance.The softer a tire compound - the better the performance, but the lower the durability.Hint!As a rule, the same tires can be used for front and rear.If the vehicle tends to oversteer, this can be avoided by using a harder front tire!In wet conditions you should use a rain tire which offers maximum grip under these circumstances.With the use of Magic Rain, a tire traction compound, the grip can be further improved.Check your tires after driving! It can happen that a tire starts to detach from the rim, in this case you should glue this spot immediately with our tire repair kit (y0067), otherwise the tire could detach completely from the rim.So find out which tire is the best for you!Dimension:Outside diameter: approx. 116 mmWidth: approx. 65 mmRims: 18 mm square driveContents:2 piece

€38.90*

Average rating of 0 out of 5 stars

10009 FG Formula 1 Competition with hydraulic brake "special price" New version 2025
Special offer price !  Including Mecatech Expert hydraulic brake on the front axle.Highlights News 2025Tuning aluminium lower wishbones, one-piece (front and rear) Tuning chassis plate black anodised and milled Tuning milled aluminium rear axle linkage for toe-in adjustment  Perforated tuning clutch bell Side flaps on the rear spoiler in carbon fibreHighlights Formel 1 Competition- Numerous aluminium parts such as front and rear bearings, damper linkage, engine mount, wishbone ends. - Uniball steel ball joints, which allow all possible adjustments of the front and rear axle- gear drive, which ensures high reliability and optimum function. Like all FG Competition models, the Formula Competition from FG is the most successful model of recent years. The experience gained from the competitions has been incorporated into the latest version. With FG gear drive, which is extremely smooth-running and provides more power reserves. With this version, FG Modellsport has certainly created a competition-ready model for the years to come that will seamlessly build on past successes. Highlights Aluminium wishbones FG Gear drive Aluminium rear axle plate FG Adjustable aluminium shock absorbers Aluminium servo saver with ball bearings 26 cc Zenoah engine Airbox Resonance pipe system Mecha. rear disc brakes 5 mm aluminium chassis  blackLexan bodyworkAnother improvement is the hydraulic disc brake in the front wheels. The chassis of the FG Formula 1 Competition is built on a 5mm aluminium chassis and all screws at the bottom of the chassis are countersunk. The front and rear axle carriers as well as the engine unit are connected to each other over the entire length of the chassis, so that almost the rigidity of a monocoque chassis is achieved. The engine is fixed in place using a quick-release fastener, making it possible to change the engine quickly. The rear axle is driven by several smooth-running spur gears and an FG ball drive on the rear axle. The clutch bell is held by a separate flange bearing to reduce the load on the crankshaft. The front and rear axle with versatile adjustment options such as camber, caster, etc. consists of aluminium wishbones at the bottom. Sturdy aluminium rear axle plates reduce wear on the rear axle and provide enormous driving stability. Four oil-pressure shock absorbers, which are actuated via a push-rod suspension, and stabilisers ensure optimum ground contact.The model is powered by a powerful 26 cc engine with airbox and resonance silencer.The chassis is supplied with tuning bowden cable brakes for the rear axles.Equipment of the FG Formula 1 Competition kit 5 mm aluminium chassis, 26 cm³ engine, intake noise filter, tuning resonance silencer, FG gear drive, ball drive, complete rear axle and front axle carrier unit with integrated quick engine mounting, double aluminium wishbone mountings, aluminium triangular wishbones at the bottom of the rear axle and front axle, front and rear aluminium steering knuckles, ball bearing servo saver, steering stops, pushrods, 4 oil pressure shock absorbers with aluminium shock absorber pistons or mechanical tuning brakes at the front and rear. Servo saver, steering stops, pushrods, 4 oil pressure shock absorbers with aluminium shock absorber pistons or mechanical tuning brakes front and rear, anti-roll bar for front and rear axle, 10 mm aluminium balls, polycarbonate body, polyamide front spoiler, receiver box, competition tyres with tyre inserts.  The models are supplied as a kit with assembly instructions. The body parts are made of crystal-clear polycarbonate for self-painting. These parts are not included and must be ordered or delivered separately if installation is required!To complete the models, you will also need: -  1 remote control system (transmitter, receiver) -  1 large servo for the steering (approx. 40 - 50 kg)-  2 servos for throttle/brake (approx. 20 - 30 kg)-  batteries and charger. IncludetZenoah 26cc engineClear bodyshell and polycarbonate spoilerMechanical brakes rearHydr. brakes frontDimensionsLength: 960mmWidth: 440mmHeight: 230mmWheelbase: 620mmFormular 1 models in action!Drive:2WDMotorization:GasRTR:Without RTRScale:1/5

€2,799.50*

Average rating of 0 out of 5 stars

7398 FG Alloy fixing plate for CY / Zenoah G230/240/260/270
Genuine FG spare/option part. Suitable for CY / Zenoah G230/240/260/270.Contents:1 piece

€23.90*

Average rating of 0 out of 5 stars

2012/500 Linkage set dedicated to Mecatech FW01, complete
Complete set for steering, throttle and brake linkagesSet includes:3 x 6534/02 Throttle pivot post for 2 mm linkages 1 x y0132 y0132 Linkage rod for MecaTech brakes1 x 1213/10 Steel ball 7 x 6,5 mm1 x 66244, Ball joint 7mm M41 x 1213/11 Steering linkage l./r., M4 x 42mm1 x 6020 Set collar 2,1mm1 x 1018/01 Throttle linkage Evo 09 / Comp. 077 x Nut M32 x Screw M3 x 16 mm3 x Screw M3 x 18 mm 2012/501 Throttle linkage 2012/502 Brake linkage set 2012/503 Steering servo linkage set 2012/504 Throttle/brake servo horn The Servo arm is suitable for all servos with an output shaft with 25T spline shaft, for example:y2006 Digital Big-Scale Servo D-21HVNearly all Robbe/Futaba servosMega Power servoThunder Tiger DS1015Savöx servosand many more!

€79.90*

Average rating of 0 out of 5 stars

PMT Supreme - M00 (K01) Tyres, medium
PMT tire chart from the current series divided into 3 categories 1) Parking lot / hobbyThe durability of the tire is the main focus here.2) Race track / hobbyHere you will find the tire that offers a compromise of durability and performance.3) Race track / competitionHere the racer will find the tires for best lap times on a race track and to win races.Note:The harder a tire compound - the longer it lasts, but the more moderate the performance.The softer a tire compound - the better the performance, but the lower the durability. Hint!As a rule, the same tires can be used for front and rear.If the vehicle tends to oversteer, this can be avoided by using a harder front tire!In wet conditions you should use a rain tire which offers maximum grip under these circumstances.With the use of Magic Rain, a tire traction compound, the grip can be further improved.Check your tires after driving! It can happen that a tire starts to detach from the rim, in this case you should glue this spot immediately with our tire repair kit (y0067), otherwise the tire could detach completely from the rim.So find out which tire is the best for you!Genuine PMT spare/option part. The Supreme have been designed for all track conditions. Developed with latest generation components, deriving directly from the highest level of Motorsport, they are available in three hardnesses:SS "NEW": supersoft, 35 shore hardness, suitable for rear and slightly abrasive asphaltsS00 (K00): soft, 38 shore hardness, suitable for rear and slightly abrasive asphaltsM00/P1 (K01): medium, 42 shore hardness, suitable for rear / front and medium abrasive asphaltsH00/P1 (K03): hard, 45 shore hardness, suitable for front and very abrasive asphaltsOn this type of tyres a new lighter and harder rim will be used, designed to withstand 25% higher lateral forces, compared to existing ones.Moreover, even the filling mousse has been updated and can now withstand up to a temperature of 130 °, without altering its mechanical characteristics. Dimension: Outside diameter: approx. 116 mm Width: approx. 65 mm Rims: 18 mm square drive Contents:2 pieces

€45.90*

Average rating of 0 out of 5 stars

7328/08 FG Ignition coil for CY / Zenoah / Fuelie / Losi
Genuine FG spare/option part.For Zenoah G230/240/260/270/290/320 enginesContents:1 piece

€63.75*

Average rating of 0 out of 5 stars

y0495/01 FG manuals set Competition EVO 07 German, 1 pce.
Item N° y0495/01 FG manuals set Competition EVO 07 German, 1 pce.Genuine FG manuals as included with the cars.All wheelbases, including Race Truck.

€3.90*
Loading...
Upload in progress, please be patient ...
Shopware-Agency Shopware-Theme Development