Skip to main content Skip to search Skip to main navigation
EXTRA 20% off Outlet*. Use Code: EXTRA20 at checkout!!
+49 2151 820200 Mon-Fri 9 am - 6 pm, Sa 9 am - 1 pm

Mielke 5440 Power Gearshift clutch for Mecatech/Genius/S88R/FBX, 2,3mm springs, Mix

Product information "Mielke 5440 Power Gearshift clutch for Mecatech/Genius/S88R/FBX, 2,3mm springs, Mix"

The new adjustable system features two aluminum and one carbon pad with special 2.3 mm springs.
Weight of the complete clutch is 70 grams. Very wear resistent when running with the recommended clutch bells.

Adjustable friction points:
  • First gear - 8.500 U/min.
  • Second gear - 9.300 U/min.
  • Third gear - 10.100 U/min.
  • Fourth gear - 11.000 U/min.


With tool #5445 the engagement speed can be adjusted to different settings within a range from about 8,500 to 11,000 rpm.

0 of 0 reviews

Average rating of 0 out of 5 stars

Leave a review!

Share your experiences with other customers.


Accessories / Spare parts

Average rating of 0 out of 5 stars

5440/01 Mielke Clutch carrier for 5440
Genuine Mielke spare/option part. Contents:1 piece

€39.90*

Average rating of 0 out of 5 stars

5440/02 Mielke Front cover for 5440
Genuine Mielke spare/option part. Contents:1 piece

€39.90*

Average rating of 0 out of 5 stars

Mielke 5445 Power Gearshift clutch adjustement tool
Adjustment tool for Mielke Power Gearshift clutches #5440 and #5441.

€19.90*

Average rating of 0 out of 5 stars

Mielke 5446 Mix clutch shoes 2x aluminum / 1x carbon for Power Gearshift clutches
Clutch shoes for Mielke Power Gearshift clutches part numbers 5440, 5441 und 5442.

€44.90*

Average rating of 0 out of 5 stars

Mielke 5447 Springs 2,3 mm made from special steel
Genuine Mielke spare/option part. Replacement part for Mielke Power Gearshift clutches #5440 and #5441.Contents:3 pieces

€9.90*

Average rating of 0 out of 5 stars

5445/1 Mielke tool for clamping of all Power-Gearshift clutches
Genuine Mielke spare/option part. For easier change of springs or clutch shoes.Contents:1 piece

€34.90*

Average rating of 0 out of 5 stars

5445/2 Mielke Special Screw 11mm for Mecatech/Genius clutch 5440/5540
Genuine Mielke spare/option part. Contents:1 piece

€5.95*

Customers also bought

Average rating of 0 out of 5 stars

2012-19 Mecatech Spacer Adjustment 0,5 mm
Genuine Mecatech spare/option part for the FW01.Content:4 pieces

€8.50*

Average rating of 0 out of 5 stars

2012-21 Mecatech Spacer Adjustment 2,0 mm
Genuine Mecatech spare/option part for the FW01.Content:4 pieces

€8.50*

Average rating of 0 out of 5 stars

y0148 Long carburetor brace
Genuine HT spare/option part. Fits all CY / Zenoah engines. Laser cutted stainless steel.The long design increases stiffness of the carburetor assembly significantly compared to the previous version. Comes with gasket and mounting bolt.Content:1 piece

€19.90*

Average rating of 0 out of 5 stars

8103 ESW Samba 8 Racing - tuned pipe system DMC 10-1504 for short wheelbase
We have tested and optimized the Samba 8 tuned pipe system for half a year on the engine dyno and an additional three months on various racetracks! The pipe has a new, very strong connection system. This low-maintenance flexible connection between pipe and manifold is secured by four (!) springsDespite of the increased performance fuel consumption remains the same compared to a Samba 7 pipe. The Samba 8 system provides significantly better performance, i.e. the power is optimally available across the engines entire rpm range! Again and again, podium places are achieved at major events through the use of Samba tuned pipe systems.Of course, the Samba 8 tuned pipe system is race legal for racing, with the DMC approval number 10-1504 engraved. The Samba 8 - tuned pipe system comes with an installation kit. The mounting pictures shows the Samba 8 in Titan version.Original statement from Samba: "This new tuned pipe system is the result of the development of the Samba 7 tuned pipe!"

€229.90*

Average rating of 0 out of 5 stars

2012/500 Linkage set dedicated to Mecatech FW01, complete
Complete set for steering, throttle and brake linkagesSet includes:3 x 6534/02 Throttle pivot post for 2 mm linkages 1 x y0132 y0132 Linkage rod for MecaTech brakes1 x 1213/10 Steel ball 7 x 6,5 mm1 x 66244, Ball joint 7mm M41 x 1213/11 Steering linkage l./r., M4 x 42mm1 x 6020 Set collar 2,1mm1 x 1018/01 Throttle linkage Evo 09 / Comp. 077 x Nut M32 x Screw M3 x 16 mm3 x Screw M3 x 18 mm 2012/501 Throttle linkage 2012/502 Brake linkage set 2012/503 Steering servo linkage set 2012/504 Throttle/brake servo horn The Servo arm is suitable for all servos with an output shaft with 25T spline shaft, for example:y2006 Digital Big-Scale Servo D-21HVNearly all Robbe/Futaba servosMega Power servoThunder Tiger DS1015Savöx servosand many more!

€79.90*

Similar products

Average rating of 0 out of 5 stars

Mielke 5445 Power Gearshift clutch adjustement tool
Adjustment tool for Mielke Power Gearshift clutches #5440 and #5441.

€19.90*

Average rating of 0 out of 5 stars

5445/1 Mielke tool for clamping of all Power-Gearshift clutches
Genuine Mielke spare/option part. For easier change of springs or clutch shoes.Contents:1 piece

€34.90*

Average rating of 0 out of 5 stars

Mielke 5540 Power Gearshift clutch for Mecatech/Genius/FBX/S88R, Mix, 2,4mm springs
The new adjustable system features two aluminum and one carbon pad with special 2.4 mm springs.Weight of the complete clutch is 70 grams. Very wear resistent when running with the recommended clutch bells.Adjustable friction points: First gear - 8.500 U/min. Second gear - 9.300 U/min. Third gear - 10.100 U/min. Fourth gear - 11.000 U/min.With tool #5445 the engagement speed can be adjusted to different settings within a range from about 8,500 to 11,000 rpm.

€129.50*

Average rating of 0 out of 5 stars

Mielke 5740 Power Gearshift tuning clutch for Genius, Mecatech, S88R, FBX, Carbon, 2,0 mm springs
Genuine Mielke spare/option part. For onroad vehicles, less Grip or rain use.The new adjustable system features three carbon pads with special 2.0 mm springs.Weight of the complete clutch is 70 grams. Very wear resistent when running with the recommended clutch bells.Adjustable friction points: First gear - 8.500 U/min. Second gear - 9.300 U/min. Third gear - 10.100 U/min. Fourth gear - 11.000 U/min.With tool #5445 the engagement speed can be adjusted to different settings within a range from about 8,500 to 11,000 rpm. Contents:1 piece

€129.50*

Customers also viewed

Average rating of 0 out of 5 stars

TT0990 Top Tuning Failsafe with kill switch and status LED for all transmitters
Genuine TT spare/option part.The new and improved failsafe modul.This kill switch module works with most FM and 2.4 GHz rc-systems. Not compatible with AVC-equipped receivers! You must have a free channel on your rc-system in order to install the module! This means at least a 3-channel radio for standard 1-servo brake/throttle setups or a 4-channel radio for dual brake servos driven by the radio's mixer function. With this module you can stop the engine with your radio. Additionally the module features a failsafe function which stops the engine when the rx-battery's voltage drops below a certain level or the rc-system has a glitch. A kill switch module fulfils two tasks. On the one hand, as a safety device, it is intended to shut off an engine with magneto ignition in case of failure of the remote control, and on the other hand, the engine can be stopped at any time by remote control.While the latter is mainly used for convenience, the safety aspect is what really matters.The failsave circuit integrated in all modern remote controls may brake the vehicle in the event of a radio interference, but this feature is dependent on the basic functionality of the receiver system and its power supply. However, if the receiver, the gas servo or the power supply fails completely, the failsave of the remote control can no longer do its job. The vehicle may be running haywire at full throttle.In these cases, the kill switch will cut the ignition of the engine and the vehicle will roll out without power.Features:Ready to install no soldering requiredRemote LED for easy-to-spot operational status (ignition live/killed)Optically coupled to isolate the ignition from the radio systemThreshold value for undervoltage protection (4V, 5V, 6V) adjustable with jumpers allows adaptation to the rx-battery type (LiPo, LiFePo, NiMH, NiCd)Contents:1 piece

€47.90*

Average rating of 0 out of 5 stars

5650 Mielke Power Gearshift II Converse System clutch for Mecatech / Genius / FBX / S88R, 2,4mm springs, Mix
Genuine Mielke spare/option part. Fits Mecatech / Genius / FBX / SR 88Backwards installedshoes make this clutch a "Converse" clutch!After many successes with the "normal" Power Gearshift clutch this is the next step.Made of high-strength aluminium 7075-T6! All components, including the pads, are manufactured on precision machines.Contents:1 piece

€129.50*

Average rating of 0 out of 5 stars

8303 ESW wSamba 8 Titan Racing - tuned pipe system DMC 10-1504 for short wheelbase 510mm
The Samba 8 titanium gives you a weight saving of 140 grams compared to the steel version. We have tested and optimized the Samba 8 Titan- tuned pipe system for half a year on the engine dyno and an additional three months on various racetracks! The pipe has a new, very strong connection system. This low-maintenance flexible connection between pipe and manifold is secured by four (!) springs, making a failure prone o-ring seal obsolete! Despite of the increased performance fuel consumption remains the same compared to a Samba 7 pipe. The Samba 8 system provides significantly better performance, i.e. the power is optimally available across the engines entire rpm range! In the short version 8303 ESW, the installation of the tuned pipe is possible in vehicles with 510mm wheelbase. Again and again, podium places are achieved at major events through the use of Samba tuned pipe systems.Of course, the Samba 8 tuned pipe system is race legal for racing, with the DMC approval number 10-1504 engraved. The Samba 8 - tuned pipe system comes with an installation kit.Fits: All On-road cars from FGContrastBergonzoniHarmGeniusand many others as wellOriginal statement from Samba: "This new tuned pipe system is the result of the development of the Samba 7 tuned pipe!"

€399.00*

Average rating of 0 out of 5 stars

5445/1 Mielke tool for clamping of all Power-Gearshift clutches
Genuine Mielke spare/option part. For easier change of springs or clutch shoes.Contents:1 piece

€34.90*

Average rating of 0 out of 5 stars

FG Sportsline 2WD-530 with BMW M3 ALMS body shell, 23cm³ Engine HT-Edition
The Sportsline quality at a reasonable price for beginners. For rookies and all those who simply just want to have fun and drive a DTM Audi, Mercedes or a fast Porsche. The Sportsline series is ideal for car modellers whose main focus is not just the chassis, but rather the combination of chassis and body shell.Technical description:The model has a 535 wheelbase. The models are built on a 4mm alloy chassis with double wishbones at front and rear axle. All borings of the alloy chassis are countersunk to prevent the screw heads from bearing out. The models are serial equipped with the 2-damper front axle which guarantees an optimal traction of both front wheels. At the front/rear axle you can adjust through track rods or adjusting screws with right-/left-handed thread the king pin angle, trailing effect and toe-in. Further equipment points are front disk brakes, differential gear, easy-running FG ball drive, alloy brake calliper with big brake disk, stabilizer bar front and rear, tuned pipe muffler, Evo gas tank, rear brace, 24T steel pinion, spark plug cap suppression cover, latest version (Evo) oil-pressure shock absorbers with volume control and external adjusting ring for the initial spring preload. All rotating parts as shafts, axles and clutch bells a.s.o. are supported by ball bearings. You can select the car with complete RTR-equipment from the options menu. RTR-equipment RTR = Ready to Run. The RTR version comes ready to use with the 2,4 GHz rc-system already installed. Transmitter 2,4 GHzReceiverHigh power servo for throttle and brakeLargescale servo for steeringTx-battery, rx-battery The models are equipped with a powerful 23ccm combustion engine. The engine needs a 2-stroke petrol oil mixture. One tank filling gives you about 45 minutes driving fun. The power is transmitted over the well-tried system: from the engine over the 2-block clutch over radial tooth wheels on to the rear axle which is equipped with the bevel differential gear with pluggable axles. RC-plate with receiver box.To complete the models all merchantable servos and radio control systems are suitable. The RTR version comes with complete factory installed rc-system, including Ni-Cads!Dimensions: Length: 780 mm Width: 392 mm Height: approx. 240 mm Wheelbase: 530 mm The car comes with an unpainted body shell!HT-Edition? HT-Edition means: this version comes with a big set of spare / option parts included. Steel pinions - Non-standard sizesEach of two different ratios are supplied with.Modul: m=1,5Value: 62,60 EURAlloy engine mount bigCNC machined alloy engine mount, direkt replacement for the stock plastic part, heat and tweak resistant. They come with all necessary hardware included. Value: 64,95 EUR Alloy spur gear carrierUse for 39T - 44 teeth spur gears.Value: 39,90 EUR Ball bearing set, sealed, set of 14The seal rings on sealed ball bearings keep dirt and dust out of the bearings. They are therefore particularly suitable for use in dirty and dusty environments.Value: 59,90 EURTotal value: 227,35 EURTouring cars in action!Painting tips:

From €1,299.90*

Average rating of 0 out of 5 stars

Mielke 5441 Power Gearshift clutch for FG (except Formula 1+Evo2020), Smartech, Harm, Losi /HPI, Mix, 2,3mm springs with long clutch carrier
The new adjustable system features two aluminum and one carbon pad with special 2.3 mm springs.Weight of the complete clutch is 70 grams. Very wear resistent when running with the recommended clutch bells.Adjustable friction points: First gear - 8.500 U/min. Second gear - 9.300 U/min. Third gear - 10.100 U/min. Fourth gear - 11.000 U/min.With tool #5445 the engagement speed can be adjusted to different settings within a range from about 8,500 to 11,000 rpm.For RS5 models from version T14!

€129.50*
%

Average rating of 0 out of 5 stars

y1129 Mecatech hydraulic brake Expert for FG, Carson and many more, incl. brake bleeding set
Genuine Mecatech spare/option part. Full-metal hydraulic brake (like the former hydraulic FG brake).The set consists of two complete brake calipers for right and left, and 2 brake units, hydraulic oil and all accessories (see also our pictures) required for installation.One version fits front and rearFits onroad / offroad / monster and stadium cars from FG and othersNo need for alloy uprights!Fits Formular 1 models, Competition, Sportsline and E (in connection with alloy front uprights y0932Bleeding instructionsDimensions master brake cylinder:Height: 75 mmWidth: 48 mmDepth: 13 mmContents:1 set

From €179.90* €219.90* (18.19% saved)
Loading...
Upload in progress, please be patient ...
Shopware-Plugin Development Shopware-Agency