Mielke 5441 Power Gearshift clutch for FG (except Formula 1+Evo2020), Smartech, Harm, Losi /HPI, Mix, 2,3mm springs with long clutch carrier
€129.50
Available
Product information "Mielke 5441 Power Gearshift clutch for FG (except Formula 1+Evo2020), Smartech, Harm, Losi /HPI, Mix, 2,3mm springs with long clutch carrier"
Weight of the complete clutch is 70 grams. Very wear resistent when running with the recommended clutch bells.
Adjustable friction points:
- First gear - 8.500 U/min.
- Second gear - 9.300 U/min.
- Third gear - 10.100 U/min.
- Fourth gear - 11.000 U/min.
With tool #5445 the engagement speed can be adjusted to different settings within a range from about 8,500 to 11,000 rpm.
For RS5 models from version T14!
Login
Accessories / Spare parts
Genuine Mielke spare/option part. Contents:1 piece
Genuine Mielke spare/option part. Contents:1 piece
Adjustment tool for Mielke Power Gearshift clutches #5440 and #5441.
Clutch shoes for Mielke Power Gearshift clutches part numbers 5440, 5441 und 5442.
Genuine Mielke spare/option part. Replacement part for Mielke Power Gearshift clutches #5440 and #5441.Contents:3 pieces
Genuine Mielke spare/option part. For easier change of springs or clutch shoes.Contents:1 piece
Customers also bought
Hobbythek car bag for 1/5 carsFits for all 1/5 models for example: FG-: HPI-; Mecatech FW01-; Carson-; Smartech-; Conrads-; Harm-; RS5-; Lauterbacher a.s.oMade from extremely durable fabric, easily washable; with wrap-around shoulder belts and zipper closure.No dirt in the car boot!Dimensions:Length: 95 cmWidth: 40 cmHeight: 30 cm
Genuine Mielke spare/option part. For easier change of springs or clutch shoes.Contents:1 piece
Item N° 66217 Steel pinion 14T narrow, 1pce.Layshaft pinion for FG 4WD cars, 10 mm bore diameter, tooth width 9.25 mm, total width 15.6 mm, outer diameter 25.7 mm.Module: m=1,5Profile regraded, this means that the number of teeth is changed while the diameter remained constant. The part of the involute curve that defines the tooth profile is changed. Positively regraded (lower number of teeth) pinions are stronger and run smoother, the reduced strength of negatively regraded pinions doesn't really matter.
Item N° 7472/01 Tuning clutch bell hardened, 1 pce.Case-hardened clutch bell made of hard andtough steel, without cooling hole, therefore suitablefor Off-Road Buggies.
Genuine FG spare/option part. CNC-machined from high grade aluminum to close tolerances this rigid part features three sets of mounting holes for the steering rods.Suitable for all FG models.Contents:1 piece
Genuine FG spare/option part. Suitable for all FG 1:5 and 1:6 2WD and 4WD models. Best fitting of ball bearing seat and distance of gear shaft, non-twisting. To mount this gear plate into the models Marder, Beetle, Beetle On-Road, Pajero and Monster the rear brake 7040/01 is needed.Bearing seatsClutch bell: 22 x 6 mmLayshaft: 19 x 7 mmContent:1 piece
Customers also viewed
Genuine Mielke spare/option part. For offroad vehicles, less Grip or rain use.The new adjustable system features two aluminum and one carbon pad with special 2.0 mm springs.Weight of the complete clutch is 70 grams. Very wear resistent when running with the recommended clutch bells.Adjustable friction points: First gear - 8.500 U/min. Second gear - 9.300 U/min. Third gear - 10.100 U/min. Fourth gear - 11.000 U/min.With tool #5445 the engagement speed can be adjusted to different settings within a range from about 8,500 to 11,000 rpm. Contents:1 piece
Genuine Mielke spare/option part. For offroad vehicles, less Grip or rain use.The new adjustable system features three carbon pads with special 2.0 mm springs.Weight of the complete clutch is 70 grams. Very wear resistent when running with the recommended clutch bells.Adjustable friction points: First gear - 8.500 U/min. Second gear - 9.300 U/min. Third gear - 10.100 U/min. Fourth gear - 11.000 U/min.With tool #5445 the engagement speed can be adjusted to different settings within a range from about 8,500 to 11,000 rpm. Contents:1 piece
The first 1/5 touring and sports car designed as a 4WD from the ground up. With a wheelbase of 510mm the 4WD chassis is suitable for the FG Mini Cooper and the FG Porsche GT3 RSR bodies. Equipped with a strong 26 cm³ engine, tuning pipe, tank with quick acting closure, 2 differential gears, front disk brake and a lot more. However, the highlight is still the well-known FG 4WD. Maximum traction, easy handling and grip during cornering as well, these are the advantages only a 4WD model can offer.You can select the car with complete RTR-equipment from the options menu. RTR-equipment RTR = Ready to Run. The RTR version comes ready to use with the 2,4 GHz rc-system already installed. Transmitter 2,4 GHzReceiverHigh power servo for throttle and brakeLargescale servo for steeringTx-battery, rx-battery The RTR version of the car includes servos, transmitter, receiver, rechargeable batteries for transmitter / receiver.The 4WD Sportsline chassis opens up a new era within the Touring and Sportscar class of large scale model cars. Main target was the development of a chassis with supreme driving dynamics and ultimate performance. Maximum traction as well as easy handling, sufficient grip in curves, only a fourwheel powered model offers all these advantages. With the new 4WD Sportsline series FG Modellsport once again sets a trend at 1:5 scale.The 4WD Sportsline chassis for the Porsche 911 GT3 RSR is delivered with a wheelbase of 510mm. The fourwheel drive is carried out over an almost wear resistant tooth belt. 2 differential gears, tank with snap closure and a powerful engine with Tuning pipe turn the Sportsline 4WD chassis into a high-class 1:5 scale model with outstanding driving characteristics.You can choose this 4WD model with painted bodyshell, 2.4 GHz radio control system, servos, batteries in our configurator. Team decals are not included in the delivery content and have to be ordered separately.The engine runs with a 2-stroke petrol-oil mixture. Through the installed pull-start system the engine can be started without any problems. A tank filling enables you to run your model around 45 minutes. Equipment and technical description:Solid 4mm chassis made of high-quality aluminium low-wear belt drive splash-proved 2 differential gears double wishbones at front and rear axle toe-in, castor and wheel camber adjustable at the axles - rear FG ball drive all steel driving components hardened all rotating parts ball-beared servo relieving servo saver front disk brake rear gear brake with big brake disk 700ccm fuel tank with snap closure oil-pressure shock absorbers with volume control and spring adjusting ring 26 cm³ combustion engine with Tuning pipe fabric hollow chamber tires with inserts receiver box and battery holder polycarbonate bodyshell 2.4 GHz pistol grip radio control system with steering and gas servo.Dimensions: Length: 980 mm Width: 405 mm Height: 250 mm Wheelbase: 510 mm Touring cars in action!Painting tips:
Genuine Losi spare/option part.
Genuine Mecatech spare/option part for the FW01.Contents:1 piece
Genuine Mielke spare/option part. Fits Mecatech / Genius / FBX / SR 88Backwards installedshoes make this clutch a "Converse" clutch!After many successes with the "normal" Power Gearshift clutch this is the next step.Made of high-strength aluminium 7075-T6! All components, including the pads, are manufactured on precision machines.Contents:1 piece
Genuine FG spare/option part. Powerfull servo for 2WD and 4WD 1/5 and 1/6 cars. Ballraced, with metal gears.Technical data:Voltage : 6.0-7.4VSpeed : 0.14s-0.12s/60°Torque: 9-10kgcmDimensions : 40.8 x 20.1 x 38 mmWeight : 56 gContents:1 piece