Mielke 5540 Power Gearshift clutch for Mecatech/Genius/FBX/S88R, Mix, 2,4mm springs

€129.50*

Prices incl. VAT plus shipping costs

Available

Product number: mielke_5540

EAN: 4058575113478

Mielke 5445 Power Gearshift clutch adjustement tool

Adjustment tool for Mielke Power Gearshift clutches #5440 and #5441.

€19.90*

5445/1 Mielke tool for clamping of all Power-Gearshift clutches

Genuine Mielke spare/option part. For easier change of springs or clutch shoes.Contents:1 piece

€34.90*

Product information "Mielke 5540 Power Gearshift clutch for Mecatech/Genius/FBX/S88R, Mix, 2,4mm springs"

The new adjustable system features two aluminum and one carbon pad with special 2.4 mm springs.
Weight of the complete clutch is 70 grams. Very wear resistent when running with the recommended clutch bells.

Adjustable friction points:

First gear - 8.500 U/min.
Second gear - 9.300 U/min.
Third gear - 10.100 U/min.
Fourth gear - 11.000 U/min.

With tool #5445 the engagement speed can be adjusted to different settings within a range from about 8,500 to 11,000 rpm.

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

Display reviews in current language only.

No reviews found. Share your insights with others.

Accessories / Spare parts

5440/01 Mielke Clutch carrier for 5440

Genuine Mielke spare/option part. Contents:1 piece

€39.90*

5440/02 Mielke Front cover for 5440

Genuine Mielke spare/option part. Contents:1 piece

€39.90*

Mielke 5445 Power Gearshift clutch adjustement tool

Adjustment tool for Mielke Power Gearshift clutches #5440 and #5441.

€19.90*

Mielke 5446 Mix clutch shoes 2x aluminum / 1x carbon for Power Gearshift clutches

Clutch shoes for Mielke Power Gearshift clutches part numbers 5440, 5441 und 5442.

€44.90*

Mielke 5447/01 Springs 2,4 mm made from special steel

Genuine Mielke spare/option part. Replacement part for Mielke Power Gearshift clutches #5440 and #5441.Content:3 pieces

€9.90*

5445/2 Mielke Special Screw 11mm for Mecatech/Genius clutch 5440/5540

Genuine Mielke spare/option part. Contents:1 piece

€5.95*

Mielke S-1202 Clutch bell for SR 88 R (Mecatech System)

Genuine Mielke spare/option part. Contents:1 piece

€59.90*

5445/1 Mielke tool for clamping of all Power-Gearshift clutches

Genuine Mielke spare/option part. For easier change of springs or clutch shoes.Contents:1 piece

€34.90*

Customers also viewed

5640 Mielke Power Gearshift II Converse System clutch for Mecatech / Genius / FBX / S88R, 2,4mm springs, Alu

Genuine Mielke spare/option part. Fits Mecatech / Genius / FBX / SR 88Backwards installedshoes make this clutch a "Converse" clutch!After many successes with the "normal" Power Gearshift clutch this is the next step.Made of high-strength aluminium 7075-T6! All components, including the pads, are manufactured on precision machines.Contents:1 piece

€129.50*

5650 Mielke Power Gearshift II Converse System clutch for Mecatech / Genius / FBX / S88R, 2,4mm springs, Mix

Genuine Mielke spare/option part. Fits Mecatech / Genius / FBX / SR 88Backwards installedshoes make this clutch a "Converse" clutch!After many successes with the "normal" Power Gearshift clutch this is the next step.Made of high-strength aluminium 7075-T6! All components, including the pads, are manufactured on precision machines.Contents:1 piece

€129.50*

Mielke 5440 Power Gearshift clutch for Mecatech/Genius/S88R/FBX, 2,3mm springs, Mix

The new adjustable system features two aluminum and one carbon pad with special 2.3 mm springs.Weight of the complete clutch is 70 grams. Very wear resistent when running with the recommended clutch bells.Adjustable friction points: First gear - 8.500 U/min. Second gear - 9.300 U/min. Third gear - 10.100 U/min. Fourth gear - 11.000 U/min.With tool #5445 the engagement speed can be adjusted to different settings within a range from about 8,500 to 11,000 rpm.

€129.50*

Details

2012-95 Mecatech Special Screw Clutch loching

Genuine Mecatech spare/option part for the FW01.Content:1 piece

€28.00*

Mielke 5541 Power Gearshift clutch for FG (except Formula 1+Evo2020), Harm, RS5, Mix, 2,4mm springs with long clutch carrier

The new adjustable system features two aluminum and one carbon pad with special 2.4 mm springs.Weight of the complete clutch is 70 grams. Very wear resistent when running with the recommended clutch bells.Adjustable friction points: First gear - 8.500 U/min. Second gear - 9.300 U/min. Third gear - 10.100 U/min. Fourth gear - 11.000 U/min.With tool #5445 the engagement speed can be adjusted to different settings within a range from about 8,500 to 11,000 rpm.For RS5 models from version T14!

€129.50*

Carburetor Walbro WT 668B/668C with choke normal/ball-raced

Alternative: Walbro 603B also with choke. But with better manufacturing quality!The Walbro WT668B carburetor fits all Zenoah, Chung Yang (CY), Losi, HPI und PT (Smartech/Carson) engines from 23cc up to over 30cc. The Walbro WT668B features an integrated choke with lever and a throttle shaft linkage lever.The WT668B is also available with ball-raced throttle shaft under part number # y0036/04 Ballraced tuning Walbro WT668B carburetory0036/04 Ballraced tuning Walbro WT668B carburetorWith dual ball bearings on the throttle shaft. Two sealed bearings 2RS type (3/16" x 5/16" x 1/8") shielded by two steel plates (5 x 8 x 0.3 mm). High quality processed and optimized for racing use! The soft stock screw holding the throttle lever has been replaced with a high strength Allen key screw. Since all screws on the carb are imperial sized, so is the key for this screw. A corresponding bit is included in our tool set y0785, or you can use Allen key wrench y0037/03 as well.The Walbro WT668B carburetor fits all Zenoah, Chung Yang (CY), Losi, HPI und PT (Smartech/Carson) engines from 23cc up to over 30cc. The modified Walbro WT668B features an integrated choke with lever and a throttle shaft linkage lever.The Walbro WT668B carburetor is also available in a standard version under part number # y1067 Walbro WT668B carburetor.

€69.90*

Details

Mecatech FW01 Touring car, wheelbase 530 mm, Basic Kit -- Europe- and world champion

The Mecatech FW01 is for sure the currently most innovative 1/5 race car designed for the dedicated and technically enthusiastic rc car driver.Everyone is enthusiastic about the perfectly fitting and precise workmanship at the highest level. Only high quality materials are used for the production.Since many years Mecatech is a well-know premium manufacturer of largescale hydraulic brakes or shocks and, as only a few may know, a technology expert for a number of Formula 1 racing teams!The Basic Kit of the FW01 is especially intended for "switchers" and differs from the chassis kit in terms of the brakes and shock absorbers (included in the chassis kit). Here is a list of the parts that are required for completion:brakes, shocks and springs (Difference to Chassis Kit)DifferentialEngine Clutch, Airbox and tuned pipe systembody shell and tiresElectonic components such as servos, batteries and Remote controlStock gearing:Clutch pinion / spur gear: 36T / 64TLayshaft pinion / differential: 24T / 73TCurrently the Mecatech FW01 is for sure the benchmark of the 1/5 scale racing scene! In the first year Markus Feldmann won with his FW01 1: 5 Mecatech on one of the world's finest and most demanding race track in Lostallo / SwitzerlandMecatech is multiple German, European and World Champion with the FW01 and as the last result:Markus Feldman wins the European Championship in Tourlaville/France. All top 5 positions went to drivers running a Mecatech FW01. 7 out of 10 finalists cars were Mecatech FW01.Although the fit of the Mecatech FW01 parts makes the assembly of the car a great experience, some of our customers want to use the expertise of our shop and wish their FW01 fully assembled and tuned in by us!The complete assembly of your FW01 by our workshop is possible for an additional charge. Please note that the costs of the full assembly with servos a.s.o. do not include the price of any rc-components. If you do not have a suitable radio system with servos and batteries as well as switch and charger, you have to take an additional EUR 800 to EUR 1,500 for this equipment into account. We will be happy to make you an appropriate offer. We are currently waiting for the latest version of the Mecatech FW01.Included in the basic kit:- All pinions- clutch bell- Coupling fixation- All parts and screws for mounting the engineDoes not include- Brakes, shocks and springs- differential- clutch- body and spoilers- Airbox- Engine and linkage- Electronics- Tires

€1,862.00*