6048 FG Steel gearwheel big 48 teeth
€52.90
% €53.90 (1.86% saved)
Available
Product information "6048 FG Steel gearwheel big 48 teeth"
Differential spur gear for all FG street cars except Formula 1.
Can also be used as a main spur gear on the layshaft on monster models when mounted on alloy gear carrier y0190.
Dimensions:
- Outer diameter: 75 mm
- Width: 7.5 mm
- Bore: 45 mm
- Module: m=1,5
Contents:
- 1 piece
Lebacher Strasse 4
66113 Saarbrücken
Germany
Login
Accessories / Spare parts
This carriers makes it possible to run steel spur gears on the layshaft. Pebbles heat and the high torque of monster truck applications are no longer a problem.The carrier is designed for reverse installation as seen on the FG EVO car, where the hubs of the pinion and the spur gear carrier are pointing to the outside of the car. The carrier features M8 (eight, no typo) grub screws for installation on the layshaft. This means that the tip of the screw is as wide as the flat area on the shaft and ensures best possible load distribution.Please note: the wide FG 48T spur gear 6048/2 does not fit this adapter, but it wouldn't be recommended for this application anyway; it's way too heavy.Content:1 piece
Alternatives
Genuine FG spare/option part. Heavy duty differential spur gear, standard on all late model FG off road cars. Wider teeth to resist the impacts of jumps and wheelies.Does not fit Elcon Differential!Module: m=1,5.Contents:1 piece
Customers also bought
Genuine FG spare/option part. True running steel pinion for minimized wear. Suitable for all FG cars.Dimensions:Diameter: 26,7 mmBore: 10 mmTotal width: 16 mmTooth width: 9.5 mmModule: m=1,5Profile regraded, this means that the number of teeth is changed while the diameter remained constant. The part of the involute curve that defines the tooth profile is changed. Positively regraded (lower number of teeth) pinions are stronger and run smoother, the reduced strength of negatively regraded pinions doesn't really matter.Contents:1 piece
Outer diameter 72 mmInner diameter 26 mmBolt circle 3 x 35 mmWidth 10 mmModule m=1.5
Genuine HT spare/option part.Wheel squares made of high-strength aluminum, hardened, with two M6 mounting threads Suitable for most 1/6 and 1/5 rc-cars. Through the use of two 6 mm screws a significantly higher retention force is achieved. Yet it is still recommended to use medium strength thread lock (link y0114)! The hard anodizing (HART-COAT) guarantees much lower wear of the squares! Especially recommended when using wheel mounted brake discs! Four 3x16 dowel pins per square are included which prevent the squares from spinning in the rim. Press fitting them into the wheel squares is optional. The 12, 14 and 17 mm wide squares feature a groove for inserting a C-clip (link 6106/05), which acts as a guide for the brake disk. The narrow 9.5 mm wide squares dont need a clip; the close sitting rim will guide the disk. Measures18 mm square (wheel drive!)9,5 mm wide, 8.0 mm diameter axle boretwo M6 mounting threads The set includes 2 pieces of 9,5 mm wide wheel squares and 4 pieces each of M6 grub screws and 3x16 dowel pins.Contents:2 pieces
Genuine HT spare/option part.Wheel squares made of high-strength aluminum, hardened, with two M6 mounting threads Suitable for most 1/6 and 1/5 rc-cars. Through the use of two 6 mm screws a significantly higher retention force is achieved. Yet it is still recommended to use medium strength thread lock (link y0114)! The hard anodizing (HART-COAT) guarantees much lower wear of the squares! Especially recommended when using wheel mounted brake discs! Four 3x16 dowel pins per square are included which prevent the squares from spinning in the rim. Press fitting them into the wheel squares is optional. The 12, 14 and 17 mm wide squares feature a groove for inserting a C-clip (link 6106/05), which acts as a guide for the brake disk. The narrow 9.5 mm wide squares dont need a clip; the close sitting rim will guide the disk. Measures18 mm square (wheel drive!)12 mm wide, 8.0 mm diameter axle boretwo M6 mounting threads The set includes 2 pieces of 12 mm wide wheel squares and 4 pieces each of M6 grub screws and 3x16 dowel pins.Content:2 pieces
Item N° 8384/01 Tank 700mlSpare part for FG fuel tank no. 8384.Contents:1 piece
Item N° 6432 Steel pinion 18 teeth - 1pce.For combination with 46T main spur gear.Diameter 29,7 mmBore 10 mmTotal width 18 mmTooth width 11.5 mmModule: m=1,5
Customers also viewed
Genuine FG spare/option part. Heavy duty differential spur gear, standard on all late model FG off road cars. Wider teeth to resist the impacts of jumps and wheelies.Does not fit Elcon Differential!Module: m=1,5.Contents:1 piece
Item N° 8485/05 Alloy differential adjustable - 1pce.Adjustable alloy differential, external blocking from 0% to 90%, less slippage at the rear axle. Suitable for all 1:5 models, Race-Trucks and Formula 1 models with horizontal engine.
This carriers makes it possible to run steel spur gears on the layshaft. Pebbles heat and the high torque of monster truck applications are no longer a problem.The carrier is designed for reverse installation as seen on the FG EVO car, where the hubs of the pinion and the spur gear carrier are pointing to the outside of the car. The carrier features M8 (eight, no typo) grub screws for installation on the layshaft. This means that the tip of the screw is as wide as the flat area on the shaft and ensures best possible load distribution.Please note: the wide FG 48T spur gear 6048/2 does not fit this adapter, but it wouldn't be recommended for this application anyway; it's way too heavy.Content:1 piece
Genuine FG spare/option part. Spare part for 10456.Content:1 piece
Genuine FG spare/option part.For all FG cars with standard drive shafts (no ball drive). Accepts dogbones with 10 mm ball and 4 mm pin.Dimensions:Shaft, diameter: 8 mmLength: 27 mmSpline drive for FG bevel gearsCup, diameter: 18,5 mmLength 14 mmContents:1 piece
Genuine FG spare/option part.Dimensions:Diameter: 10 mmLength: 94 mmContents:1 piece
Genuine FG spare/option part.Suitable for all 1:5 models.Dimensions:Diameter 63 mmWidth 15.5 mmTooth width 12 mmModule: m=1,5Contents:1 piece