5115 FG 3-unit tuning pipe 4WD, 1:5

€119.95*

Prices incl. VAT plus shipping costs

Available

Product number: fg_5115

EAN: 3410564535424

Product information "5115 FG 3-unit tuning pipe 4WD, 1:5"

Genuine FG spare/option part.

Standard tuning pipe for 4WD Sportsline Touringcar 1:5.

Contents:

1 piece

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

Display reviews in current language only.

No reviews found. Share your insights with others.

Alternatives

7150 Samba 7 tuned pipe for 1/5 scale FG 4WD models

The 4WD Samba tuned pipe is especially designed for the 26cc Zenoah engine with a useable power band in mind. This results in a performance increase over the engines entire rpm range.

€230.00*

Details

67299 FG Steel-Power Tuning pipe Leopard/Sportsline 4WD

Genuine FG spare/option part. Spare part for FG Leopard 4WD 2010. Fits for FG Sportsline 4WD 510/530.FG fuel tank #8383 along with tank mount #69238/01 is required for installation on a Leopard 4WD Sportsline. The receiver battery must be relocated as well.Mielke #5062 is required for installation of this pipe.Contents:1 set

€349.95*

Similar products

5152 FG Extend rear body mount for Porsche

Genuine FG spare/option part. For fastening on the rear shock mount.Contents:1 piece

€17.90*

5060/01 FG Vehicle decals set Porsche GT2

Genuine FG spare/option part. Contains the stickers of the headlights, the rear lights and the radiator grill.Dimensions:310 x 120 mmContents:1 piece

€19.00*

5014/06 FG Battery holder short

Genuine FG spare/option part. Suitable for all FG touring cars with short or medium wheel base.Dimensions:Total length: 225 mmMounting bolt distance: 190 - 210 mmContents:1 piece

€14.90*

5014/04 FG Servo adapter frame, Futaba/JR, Thunder Tiger DS1015

Genuine FG spare/option part. Suitable for rc-plate 5014.Dimensions:Inside length: 44 mmInside width: 20,5 mmContents:2 pieces

€12.90*

Details

5014/05 FG Bolt for battery holder

Genuine FG spare/option part.Plastic bolt for battery holder.Contents:2 pieces

€5.90*

5020/01 FG Front bumper Porsche GT2/GT3

Genuine spare/option part.Suitable for FG Porsche GT2/GT3 body.Dimensions:Length: 340 mmWidth: 115 mmContents:1 piece

€35.90*

5014/07 FG Battery holder long

Genuine FG spare/option part. Suitable for all FG touring car und Race-Truck models with long wheel base.Dimensions:Total length: 255 mmMounting bolt distance: 220 - 240 mmContent:1 piece

€15.90*

5019/01 FG Pressure spring 0,4x5x30 mm

Genuine FG spare/option part. Suitable for all throttle rods.Contents:2 pieces

€4.90*

5116/01 FG 3-unit tunned pipe for Porsche short swb 465 mm

Genuine FG spare/option part.Stock tuning pipe for all 1/5 scale cars and Trucks models with engine in horizontal position. Now in noise-limited three-chamber version.Contents:1 piece

€124.95*

5018 FG Throttle linkage set

Genuine FG spare/option part. Contents:1 piece

€7.90*

5153 FG Leopard spare part.

Original FG Leopard spare part.

€16.90*

5070/01 FG Vehicle-Decal set Chrysler Viper

Genuine FG spare/option part. Contains the stickers of the headlights, the rear lights and the radiator grill.Not included are the advertising labels for the original design. Please order separate.Dimensions:490 x 185 mmContents:1 piece

€18.80*

Customers also viewed

10216 FG Silencer for F1 - 1pce.

Suitable for the Formula 1.

€118.90*

7401 FG Steel manifold - 1pce.

Suitable for FG and all 1:5 models with horizontal Zenoah or Solo engine in combination with a tuning pipe.

€66.95*

LOSR 8020 Tuned Exhaust Pipe, for 23-30cc Gas Engines 5ive-T/2.0 and Mini

The Losi LOSR8020 tuned pipe is dollar-for-dollar the easiest and cheapest performance upgrade you can buy for your 5ive-T/Mini. This complete exhaust system uses advanced two-stroke tuning technology to dramatically increase the low and mid range power and throttle response allowing any common 23-31cc engine to reach peak RPMs much quicker. The development was done over hundreds of laps and many hours by the Losi development team with the help of one the premier 1/5 scale engine/pipe builders. This design features a separate conical header and an ultra smooth tooled expansion chamber with a telescoping fit for both reliability as well as performance. The use of advanced precise tooling to produce both the header and the pipe optimizes the shock wave effect of the expansion chamber system as well as maximizing the durability. The hi-quality steel alloy is coated with a rust and heat resistant black finish for added protection and appearance. The compact design offers plenty of room for access to chassis parts and, since the pipe bolts directly and securely to the engine, gear changes and service on the clutch or engine is extremely easy. All mounting hardware, exhaust gasket and coupler are included as well as being available separately.Attention:Contrary to all other pipes from our range, this tuned pipe system has no silencer! Therefore it is very noisy and not allowed on most every official race track!FeaturesSeparate conical header and an ultra smooth tooled expansion chamberConstructed of hi-quality steel alloy and is coated with a rust and heat resistant black finish for added protection and appearanceRace inspired exhaust provides increase in power and performanceCreates a Racer like exhaust tone which is thrilling for the user as well as the spectatorImproves performance and provides powerful exhaust note

€229.99*

Details

5116/01 FG 3-unit tunned pipe for Porsche short swb 465 mm

Genuine FG spare/option part.Stock tuning pipe for all 1/5 scale cars and Trucks models with engine in horizontal position. Now in noise-limited three-chamber version.Contents:1 piece

€124.95*

TT1030 Top Tuning CAR-STAND for 1/5, 1/6, 1/8, 1/10

Ideal work stand with extra wide tripod up to 100 kg. load capacity with excellent stability, even on uneven (!) urface.Specially made support mechanism, individually adjustable width from 115 mm to 375 mm for most RC cars from 1/10 to 1/5 scale. incline from 0 to 90° Quickly folded and loaded For easy storage, as well as for transport completely foldable! (Carrying bag available!)Height adjustment of the support from 635 mm to 1000 mm and inclination from 0-90° Length of the support surface 386 mm Bis zu 100Kg belastbar! Support mechanism continuosly adjustable in width Due to various adjustment options, the Top Tuning CAR STAND offers the optimal possibilities for making adjustments or maintenance work on the RC car. The load capacity and stability are beyond doubt with a load limit of 100 kg and the extremely stable tripod. The up to 90 ° adjustable slant shows your RC car at events and presentations, as well as in your assembly room to its best advantage! 6.5 kg. weight Pivoting bracket Height adjustable from 69 to 104 cm Basic frame is made of steel, painted or chromed Car bracket is made of aluminum and stainless steel A tool holder TT1030/01 is also available as an accessory in our shop selection.

€179.90* €219.99* (18.22% saved)

Configure now

903184/01 Clutch block carrier

Genuine Smartech spare/option part.

€6.90*

y0671 Body set BMW 320si WTCC team Jägermeister, painted

Genuine HT spare/option part. Bodies as shown on the picture, already painted and with applied decals. The wing attachment parts and the rear wing are enclosed. The body detail kits as mirrors, windscreen wipers etc. are not included.The body shell is vac-formed from 2 mm Lexan.Required body mounts:Mount front: Rear body mount: Side body mount front: Side body mount rear: Measures:Length: 885 mmWidth: 392 mmHeigth: 260 mmWheelbase: 530 mm/ul>Contents:1 piece

€269.90*