7400/03 FG 3 chamber tuned pipe

€79.90*

Prices incl. VAT plus shipping costs

Available

Product number: fg_7400_03

EAN: 4058575066552

Product information "7400/03 FG 3 chamber tuned pipe"

Genuine FG spare/option part.

Contents:

1 piece

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

Display reviews in current language only.

No reviews found. Share your insights with others.

Customers also viewed

y1127 Carson / Smartech tuned pipe with manifold for 1/5 scale cars set

Complete tuned pipe system, will be delivered as shown with manifold, hose with clamps and variable mount. Fits FG and Carson touring cars / GTs with long wheel base.The tuned pipe is for a 535 wheelbase. The diameter is 51 mm and the complete length is about 300 mm.

€99.90*

HURRAX extreme Race tires + HR0014 Hurrax-Modular Race rim 24mm hex set, glued

hurrax_racereifen_verklebt_modular Version: HX0400 extreme grip Soft (blue mark) 175/70 mm

HURRAX extreme Race tire and insert 175x70 mm HURRAX extreme is one of the most successful tire in large scale off-road racing and specifically designed for astro turf and solid ground. With more than 700 (!) differently designed, closely spaced lugs and the 70 mm wide tread it is reasonably wear resistant and provides optimal grip with good side traction. If this - i.e. on the front axle - is not desired, you may cut the lugs at the tires outer edge to reduce cornering grip. This can be easily done with a small side cutter or strong nail scissors. In order to reduce the edging in the tire on the front axle.This makes a tire less aggressive during cornering and changes the cars behavior towards understeer. It becomes depending on the track conditions (i.e. wet!) a lot more drivable.An optimal vehicle setup can often be achieved by running already used HURRAX extreme tires on the front and new ones on the rear axle.This is especially true for 2WD models. Dimensions:External diameter approx. 175 mmInner diameter approx. 130 mmWidth approx. 70 mmWeight: one glued tire on Hurrax rim: 380 grams HURRAX extreme tires are available in soft (blue marker!) and medium through our shop menu.Genuine Hurrax spare/option part.HURRAX Modular competition rim 130 x 62 mm with 24 mm hex drive and reinforcement ring.Extremely strong and lightweight at only 162 grams, they're especially designed for competition use.This premium rim can handle even most heavy weight large scale cars like Losi 5ive-T, Losi Monster Truck XL and Losi Mini WRC.Contents:2 pieces

€59.90*

HT - tuned pipe for buggies - 1pce.

Reasonable priced 3-chamber aluminum tuned pipe, fits FG Marder/Beetle/Pajero and Carson Attack. Comes with manifold, teflon tube, hose clamps and mounting wire included.Also fits Comanche, CRT, CPT

€82.00*

Details

%

FG Challenge Line 510 Mini Cooper with 26 cm³ FG engine RTR

With this robust and reliable FG chassis, which is equipped with a powerful 26 cm³ combustion engine, you get the ideal entry into the fascinating "royal class" of large scale RC models as well as into the competition.The model has a 510 wheelbase. The models are built on a 4 mm alloy chassis with double wishbones at front and rear axle. All borings of the alloy chassis are countersunk to prevent the screw heads from bearing out. The models are serial equipped with the 2-damper front axle which guarantees an optimal traction of both front wheels. At the front/rear axle you can adjust through track rods or adjusting screws with right-/left-handed thread the king pin angle, trailing effect and toe-in.Further equipment points are differential gear, 24 teeth steel pinion, oil-pressure shock absorbers with volume control and external adjusting ring for the initial spring preload. All rotating parts as shafts, axles and clutch bells a.s.o. are supported by ball bearings.Thanks to the numerous available option parts, you can upgrade your FG Challenge Line as required. Incl. RTR-equipment RTR = Ready to Run. The RTR version comes ready to use with the 2,4 GHz rc-system already installed. Transmitter: Reflex Wheel Pro III 2,4 GHzReceiver: Mini BECHigh power servo for throttle and brakeLargescale servo for steeringTx-battery, rx-battery Dimensions:Length: 870 mmWidth: 392 mmHeight: 260 mmWheelbase: 510 mm

From €1,049.00* €1,189.90* (11.84% saved)

Configure now

7106 FG ATS rim silver 65mm - 2pcs.

Suitable for all FG 1:5 models and other makes.Rim with 18 mm square driveRim width: 65mmRim diamter: 95mmColour: Silver

€20.70*

6061 Mielke pull starter with hybrid starter function

Genuine Mielke spare / option part.Starting by pull starter or by cordless screwdriver or electric starter is possible.Pull starter with hybrid starter function. Who does not know it? A torn starter rope, blisters on your finger from constant pulling or a defective starter pawl. All these problems are a thing of the past with the hybrid starter.With the help of a cordless screwdriver the engine can be started very easily and if the battery of the cordless screwdriver is empty, the engine can be started by using the conventional way with the pull-rope starter.Please note:The starter shaft for electric start is inserted in a straight line in extension of the crankshaft. No part of the vehicle must be in the way here. On a model with a longitudinally mounted engine (e.g. Losi 5ive or DBXL vehicles) the rear axle will usually prevent the use of the electric start. The normal pull start by cable remains possible.Contents:1 piece

€114.90*

4822 Samba BIG POWER tuned pipe for Losi 5ive-T/2.0 up to 32 cm³

The Samba 5ive T tuned pipe from the 1/5 world champion!At the 1/5 World Championship were place 1 to 10 (!) equipped with a samba tuned pipe system.A proof of competence without equal!BiG BELLY, special version for the 5ive-T / Monster Truck XL with engines up to 32 cm³ engine. Comes with complete hardware for installation.Top quality and optimized performance across the entire rpm range of your engine.

€239.00*

Details