6044/05 FG Metal brake disk

€15.90*

Available

Product number: fg_6044_05

EAN: 3410564505373

Product information "6044/05 FG Metal brake disk"

Genuine FG spare/option part.

Steel brake rotor for single disc brake, only for use in combination with competition brake pads.

Dimensions:

Diameter: 52 mm
Square size: 18 mm

Contents:

1 piece

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

No reviews found. Share your insights with others.

Alternatives

y1129 Mecatech hydraulic brake Expert for FG, Carson and many more, incl. brake bleeding set

Genuine Mecatech spare/option part. Full-metal hydraulic brake (like the former hydraulic FG brake).The set consists of two complete brake calipers for right and left, and 2 brake units, hydraulic oil and all, necessary for installation, accessories (see also our pictures)One version fits front and rearFits onroad / offroad / monster and stadium cars from FG and othersNo need for alloy uprights!Fits Formular 1 models, Competition, Sportsline and E (in connection with alloy front uprights y0932Dimensions master brake cylinder:Height: 75 mmWidth: 48 mmDepth: 13 mmContents:1 set

From €249.90* €269.90* (7.41% saved)

Details

Accessories / Spare parts

8456/05 FG Competition brake lining, 2 pcs.

Suitable for alloy brake caliper, high stopping power.With glued pads.Measures:Length approx. 50 mmWidth approx. 10 mmThickness approx. 3.8 mmMounting hole distance 40 mm

€29.90*

Similar products

6038 FG Engine mount washers for M4 and M4 screws

Genuine FG spare/option part. Washers for the screws (M4 / M5) that hold the engine mounts to the chassis. Suitable for all FG models.Dimensions:Outside diameter: 15 mmInside diameter: 6 mmContents:4 pieces

€6.50*

6029/08 FG Ball-and-socket joint for M8

Genuine FG spare/option part. Reinforced plastic ball-and-socket joints for M8 thread rods. Replacement for the plastic ball-and-socket joints 6029/01.Fits 10 mm balls, total length 39 mm.Contents:4 pieces

€12.90*

6041 FG Steel layshaft 10 mm

€21.90*

6045/01 FG Brake shaft 97 with brake lever

Genuine FG spare/option part. For single disc brake only.Measures:Length: 91 mmDiameter: 6 mmThread: M3Contents:1 set

€13.90*

6051 FG Dampening rubber

Genuine FG spare/option part. Rubber pucks for all standard design FG spur gear carriers.Dimensions:Outside diameter: 16 mmInner diameter: 7 mmHeight: 6 mmContents:4 pieces

€8.90*

This product is currently not available.

6034/01 FG Plastic part for stiffening brace

Genuine FG spare/option part. Necessary for installation of 6034.Dimensions:Length: 35 mmDiameter thicker part: 10 mmDiameter thin part: 76 mmThread: M4Contents:2 pieces

€4.90*

6027 FG Ball-and-socket joint 6mm with ball

Genuine FG spare/option part. Plastic ball joint Fits all FG cars.Dimensions:Thread size: M4Länge: 20 mmBall bore: 3 mmHeight: 8 mmContents:6 pieces

€14.50*

This product is currently not available.

6036 FG Ceramic ball bearings, sealed 10x19x7 mm

Genuine FG spare/option part. Why ceramic? Besides corrosion and wear resistance ceramic balls are smoother and have a better shape stability; resulting in less drag from the bearing itself.Are used in all FG and Carson models for bearing the gearshaft.Contents:2 pieces

€20.90*

6029/07 FG Ball-and-socket joint for M6

Genuine FG spare/option part. Reinforced plastic ball-and-socket joints for M6 thread rods. Replacement for the plastic ball-and-socket joints 6029.Fits 10 mm balls, total length 39 mm.Contents:4 pieces

€12.90*

6033/01 FG Body support

Genuine FG spare/option part. Contents:1 piece

€11.50*

6028/01 FG Track rod left/right 74mm for 1:6 models

Genuine FG spare/option part. Fits all FG 1/6 off road cars, alloy version.Length of threaded section approx. 17 mm.Contents:2 pieces

€13.90*

6033/02 FG Body Support

Genuine FG spare/option part. Body mount for the Beetle 4WD.Unit:1 pieces

€11.50*

Customers also viewed

6042/01 FG Brake square 97

Genuine FG spare/option part. Stock aluminum version for single disc brake.Also available in hardened steel.Dimensions:Height: 14 mmBore: 10 mmSquare: 18 mmContents:1 piece

€10.90*

9540 FG Hydraulic brake for rear axle

Genuine FG spare/option part. Content:1 set

€384.95*

y19206 Alloy gear Plate for 2-Disc Brake

Alloy gear plate. Constant bearing distances even under high thermal conditions.Fits Marder/Beetle and Eco-line cars, will also fit Carson Streetmodel C5.You will need part number for installation.

€74.90*

7800 FG Zenoah G290RC with Walbro carburetor WT 990

Same dimensions as the Zenoah G230, G240, G260, G270.New generation Zenoah engine with 28,5cm³ cylinder capacity and approx. 3.9 hp. The cylinder is fixed with 4 screws. The technical details are identical to the Zenoah engines G240RC and G270RC.The engine will be delivered with pull starter, carb and spark plug / spark plug cap. Genuine Zenoah air filter and / or complete clutch and / or ball beard carburetor are optionally available at additional charge. Compatibility Zenoah / Losi 5ive-T:Please note that for installation in a Losi 5ive the fan cover must be swapped for a Losi or CY cover #5341 in order to fit the chassis" bolt pattern.If you want to install a Zenoah engine into the Losi 5ive, you usually have to use a fan cover from the CY engine.However, there is a workaround to maintain Zenoah fan cover.The adjustment is done via the pinion specific mounting plates for the engine. The change always affects only the rear, outer (carburetor side) plate under the fan cover. This is rotated by 180°; so that the embossed number on this plate faces the exhaust side of the engine!18T pinion: use 20T plate, rotated 180°19T pinion: use 19T plate, rotated 180°20T pinion: use 18T plate, rotated 180°On the plus side you gain the opportunity to easily mount a Zenoah engine keeping the original fan cover. On the other hand there will be the disadvantage of the necessity to combine two different sets of engine mounting plates when installing any pinion other than the stock 19T version. Therefore we do not recommend this workaround for everyday use. Nevertheless it works perfectly should ever the need arise. Attention! We recommend to run exclusively fully synthetic 2-stroke engine oil, like y0813 Motul 800 racing oil.

€284.90*

6534/02 FG Throttle pivot post

Item N° 6534/02 Throttle pivot post 3.1mm - setRevised set for 2 mm linkages, but with 3.1 mm pivot bore to prevent linkage seizing. Can be used for throttle or brake applications.Set collars have 2.1 mm inner diameter.

€7.90*

y2007/06 Alloy top case with bearings for Digital large scale Brushless Servo y2007

Genuine HT spare/option part.Alloy top case with bearings for Digital Big-Scale Brushless Servo #y2007Contents:1 piece

€19.90*

6118/06 FG RC-plate 1:6 f.hydr. brake

Genuine FG spare/option part. For use with hydraulic brakes.Contents:1 piece

€15.90*