8114 FG Manifold f. tuning pipe 4WD, 1:5, 1pce.

€45.50*

Prices incl. VAT plus shipping costs

Available

Product number: fg_8114

EAN: 3410564535431

Product information "8114 FG Manifold f. tuning pipe 4WD, 1:5, 1pce."

Item N° 08114
Manifold f. tuning pipe 4WD, 1:5, 1pce.

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

Display reviews in current language only.

No reviews found. Share your insights with others.

Alternatives

6402/01 FG Exhaust hose

Genuine FG spare/option part. Heavy gauge teflon tube for connection between exhaust manifold and tuned pipe with da inside diameter from 21 mm and a length from 50 mm.You may have to heat the tube with a cigarette lighter for installation.Contents:1 piece

Content: 5 Zentimeter (€270.00* / 100 Zentimeter)

€13.50*

y0171 Teflon Tube

Genuine HT spare/option part.Dimensions:Inna diameter: 21 mmOuter diameter: 23 mmLength: 50 mm / 70 mmContents:1 piece

Content: 5 Zentimeter (€148.00* / 100 Zentimeter)

From €7.40*

Details

%

y0702 Copper-Exhaust gasket for Zenoah, CY, Fuelie, PT, etc.

Genuine HT spare/option part. For all Zenoah G230/240/260/270/290/320 / CY / Fuelie / PTTemperature and dimensionally stable. Thickness: 1,0 mm.Please note:It is recommended to use a gasket sealer with every gasket on an engine. This gives better sealing anda longer lasting gasket. We also recommend:y0804 HT-flange sealer 518 y0994 Marston sealery0807 MD-Sil RTV silicone sealerContents:1 piece

€2.45* €4.90* (50% saved)

6725/14 FG Socket head cap screws M4x14 mm, 10 pieces

Genuine FG spare/option part.Part is delivered in silver or black color from vendor!Content:10 pieces

€2.90*

7333/02 FG Header gasket with heat shield for all Zenoah, CY, Fuelie and more

Genuine FG spare/option part.Fits Zenoah (G230, G240, G260, G270, G290, G320), Chung Yang (CY), Fuelie and HPI engines. Actual product may be of different color. We have no bearing on this since we are not the manufacturer.Please note:It is recommended to use a gasket sealer with every gasket on an engine. This gives better sealing anda longer lasting gasket. We also recommend:y0804 HT-flange sealer 518 y0994 Marston sealery0807 MD-Sil RTV silicone sealerContenst:1 piece

€8.90*

Accessories / Spare parts

y0757 Special exhaust manifold screw set, 5 pcs.

Cap screws for 1/5 & 1/6 large scale cars, DIN 912 - 8.8 M5x16 with corresponding external tooth lock washers DIN 679A.The lock washers prevent loosening of the manifold screws.Bag with five each screws and lock washers.Part is delivered in silver or black color from vendor!

€3.90*

y0758 Special exhaust manifold screw set, 5 pcs.

Cap screws for 1/5 & 1/6 large scale cars, DIN 912 - 8.8 M5x16 with corresponding spring washers DIN 127.The spring washer's tension prevents loosening of the manifold screws.Bag with five each screws and spring washers.Part is delivered in silver or black color from vendor!

€3.90*

y804 HT-flange sealer 518, 50 ml up to 200°C

Especially for installation of all engine gaskets. Temperature resistant from -55 °C to +200 °C. Resistant to water, mineral oils, synthetic lubricants, fuels, organic solvents and refrigerants. info: Hand tight: 10 - 20 minReady to use: 1 - 3 hoursGap fill: 0.5 mmContent: 50 ml Notes for usage: This surface seal is not for use as the sole sealant, it should always be applied in combination with a paper gasket.The HT-surface sealing agent should be sparsely applied over the entire surface, with care being taken that the sealant does not enter the devices internals (e.g. crankcase, differential a.s.o.) during the assembly.

Content: 50 Milliliter (€538.00* / 1000 Milliliter)

€26.90*

Customers also viewed

Mammoth Supergrip for 1/6 and 1/5 offroad cars glued, 1 pair.

y0580rg Tires: Rear Supersoft, y0591+ 5EUR

Mammoth Supergrip complete gluedMammoth Supergrip for 1/6 and 1/5 offroad carsParking lot / race tires for your offroad car.VersionWidthOuter diameterFront64 mm153 mmRear78 mm153 mmGlued on genuine FG rims (rear tires using extension rings), with foam rubber inserts included. Rim has 18 mm square drive with reinforcement ring.Please note: based on experience we recommend against using other manufacturers rims and extensions. Since the Mammoth tires provide very good grip the rim and the bonding must withstand high loads. Due to the high torque load on the bonding of tires on largescale cars, checking the bonding from time to time and re-glueing (y0067) if necessary is unavoidable.The Mammoth Supergrip is available in in the following compounds: Super softSoftMediumHardFront tirey0581y0582y0583y0584Rear tirey0591y0592y0593y0594General recommendation:The dirtier the track or the lower the ambient temperatures, the stickier (softer) the rear tires should be.Hint regarding the front tires: 2WD cars should use them one or two grades harder then the rears. 4WD cars usually like the same compound all around.Of course, the softer the tire the higher the wear rate; and this applies to Mammoth Supergrip onroad tires as well.The tires have a special onroad thread pattern but will still provide ideal traction after the pattern has been worn out. The white lettering on the tires has been applied for presentation purpose only. The tires will be delivered with black sidewall.Prices per unit: FrontRearMammoth Supergrip:Pair44,90 EUR49,90 EURTire inserts:Pair13,00 EUR13,00 EURFG rim:Pair14,90 EUR14,90 EURFG extension ring:Pair--.-- EUR14,90 EURMounting:Pair13,00 EUR13,00 EURPrices Total 85,80 EUR 105,70 EURAlso suitable for:With the following wheel adapter: y1183 Rim adapter

Variants from €69.90*

€74.90*

6402/01 FG Exhaust hose

Genuine FG spare/option part. Heavy gauge teflon tube for connection between exhaust manifold and tuned pipe with da inside diameter from 21 mm and a length from 50 mm.You may have to heat the tube with a cigarette lighter for installation.Contents:1 piece

Content: 5 Zentimeter (€270.00* / 100 Zentimeter)

€13.50*

64140/01 FG Body FG TR2 and TR4, coloured

Genuine FG spare/option part.Dimensions:Width between the front wheels: approx. 225 mmWidth between the rear wheels: approx. 280 mmWidth in the middle: approx. 360 mmLength: approx. 660 mm

€87.50*

Details

7303 Samba 7 Titan Racing tuned pipe system ESW DMC 50-1101

The Samba 7 titanium gives you a weight saving of 140 grams compared to the steel version. We have tested and optimized the Samba 7 Titan- tuned pipe system for half a year on the engine dyno and an additional three months on various racetracks! The pipe has a new, very strong connection system. This low-maintenance flexible connection between pipe and manifold is secured by four (!) springsDespite of the increased performance fuel consumption remains the same compared to a Samba 6 pipe. The Samba 7 system provides significantly better performance, i.e. the power is optimally available across the engines entire rpm range! New New connection from exhaust to manifold Lower center of gravity through new alignment Also suitable for 510 wheelbaseSamba 7 can also be installed in cars equipped with Magura 2 hydraulic brakes (see pictures).Of course, the Samba 7 tuned pipe system is race legal for racing, with the DMC approval number 50-1101 engraved. The Samba 7 - tuned pipe system comes with an installation kit.Fits: All On-road cars from FGContrastBergonzoniHarmGeniusand many others as well<Will fit medium (510 mm) wheelbase cars from FG as wellOriginal statement from Samba: "This new tuned pipe system is the result of the development"

€399.00*

Details

6274 FG Resonance tube for 2WD and 4WD off-road, set

Original FG spare/tuning part. Resonance silencer made of sturdy sheet steel, with manifold and connector. The silencer fits closely to the model, providing the best possible protection against impacts and making it versatile. Suitable for: FG 2WD and 4WD 1:6 off-road models Smartech 2WD Off-Road And many 1:6 models from other manufacturers Not suitable for: FG Leopard2 2+4 WD Sportsline and Competition Contents: 1 piece

€159.00*