Skip to main content Skip to search Skip to main navigation
EXTRA 20% off Outlet*. Use Code: EXTRA20 at checkout!!
+49 2151 820200 Mon-Fri 9 am - 6 pm, Sa 9 am - 1 pm

y1452/02 Body mount conversion kit, FG 1/6 scale 2WD Off-Road models and Smartech Uno/Carson Attack

Product information "y1452/02 Body mount conversion kit, FG 1/6 scale 2WD Off-Road models and Smartech Uno/Carson Attack"

Genuine HT spare/option part.

Conversion kit for FG 1/6 scale 2WD Off-Road models and Smartech Uno/Carson Attack to Mega Beetle.

The 8.5 x 1.0 mm female thread perfectly fits the usual stock 8 mm body mounts non-cutting.
The thread depth of about 22 mm allows for about 10 - 15 mm of body position adjustment!


Content of this set:
  • 2 pieces of front body mount (item no. 7154)
  • 2 pieces of side body mount (item no. 7154/01)
  • 2 pieces of rear roll cage mount (item no. 305001)
  • 2 pieces of aluminum body mount extension (item no. y1452)
  • 4 pieces of body clip (item no. 6013)
  • 4 pieces of M4 x 25 mm worm screw for installation of side and front mounts

0 of 0 reviews

Average rating of 0 out of 5 stars

Leave a review!

Share your experiences with other customers.


Customers also bought

Average rating of 0 out of 5 stars

6431 FG Steel pinion 16 teeth
Genuine FG spare/option part.For combination with 48T main and differential spur gear.Diameter: 26.7 mmBore: 10 mmTotal width: 16 mmTooth width: 9.5 mmModule: m=1,5Contents:1 piece

€26.90*

Average rating of 0 out of 5 stars

6080 FG Rear dogbone
Genuine FG spare/option part. Replacement drive shaft (dogbone). Long Version.Suitable for BMW GTR, Mercedes CLK-GTR, Race-Trucks, C291, Porsche GT1, GT2, GT3 and all FG Off-Road models.Dimensions:Shaft diameter: 7 mmBall diameter: 10 mmLength: 101,5 mmContents:1 piece

€19.00*

Average rating of 0 out of 5 stars

6069/01 FG Differential axle spline drive
Genuine FG spare/option part.For all FG cars with standard drive shafts (no ball drive). Accepts dogbones with 10 mm ball and 4 mm pin.Dimensions:Shaft, diameter: 8 mmLength: 27 mmSpline drive for FG bevel gearsCup, diameter: 18,5 mmLength 14 mmContents:1 piece

€29.00*

Average rating of 0 out of 5 stars

6079 FG Rear axle shaft
Genuine FG spare/option part. Dimensions:Total length 73 mmLength of M6 thread section 11 mmLength of 8 mm shaft incl. thread 59 mmLength of drive cup 14 mmContents:1 piece

€31.90*

Average rating of 0 out of 5 stars

8483/05 FG Alloy differential for 1:5 and 1:6
Genuine FG spare/option part. Alloy differential for 1:5 and 1:6 recommended for competitions. This differential is not adjustable but very solid because of its metal housing. The diff will delivery complete with bevel gears and ball bearings.The big gearwheel and the axle spline drive will not delivery!Content:1 set

€139.99*

Average rating of 0 out of 5 stars

6052 FG Plastic gearwheel 48 teeth
Genuine FG spare/option part. Stock spur gear for all FG monster cars.Suitable for spur gear carriers: 6050 (plastic) 6439 (aluminum)Dimensions:Diameter: 75 mmWidth: 15.5 mmTooth width: 12 mmModule: m=1,5 Contents:1 piece

€17.90*

Similar products

Average rating of 0 out of 5 stars

y0789 Chassis mud flaps for Losi 5ive-T/2.0
Chassis mud flaps for the Losi 5ive-T, made of 1.0 mm extremely durable plastic material. The mud flaps are precisely contoured to follow the 5ive-Ts roll cage and body shell. Die-cut and ready for installation featuring 15 eyelets in 3 different sizes and 4 each form and hole punchings to fit the roll cage brackets. The set also includes complete hardware for installation and an illustrated manual! Dimensions of mud flaps (laying flat): 930 x 135 mm Set includes: 2 x protective cover (right and left) 6 x cable clip 14 x fixing screws 12 x washers 1 x manual

€49.90*

Average rating of 0 out of 5 stars

y0670 HT Color Ex color remover 100 ml
Special remover for Lexan (Polycarbonate) and for X- and XF-color, AS- and TS-color and many more painting system until 2-K color. Does not damage the body shell!For small corrections soak a cotton swap with Color ex. Use a lint-free cloth for large area applications.Color Ex comes in a glas bottle with child-proof bottle top.Contents:100 ml / 1 piece

Content: 100 Milliliter (€99.50* / 1000 Milliliter)

€9.95*

Average rating of 0 out of 5 stars

y0565 RC-Tech Flexa Fix body shell glue
Genuine HT spare/option part. For all epoxy models, plastic and polycarbonate/lexan body repairs!Direction of use:Use a brush or other applicator. Apply enough Flexa Fix to the damaged area. Be careful not to apply too much in one go as it can be difficult to manipulate. If necessary apply two or three coats to build up the joint area. Use epoxy blanket of pieces of polycarbonate (Lexan) to re-enforce if necessary.You can also use the Flexa Fix to re-enforce the body corners (let the pure product leak into the corners) or to make flexible battery packs.Contents:1 piece / 100 ml

Content: 100 Milliliter (€109.00* / 1000 Milliliter)

€10.90*

Average rating of 0 out of 5 stars

y0544 Sanding fleece Gold Microfine Pads, 100 x 80 mm
y0544 Grit: y0544/01 - 1000 grit, gold
Genuine HT spare/option part. Perfect surface preparation for paint jobs.Metal-free grinding fleece with a 1000, 1200 or a 1500 grit to roughen the inside of the body shell to improve paint adhesion. The flexible carrier of the fleece allows for a consistent, uniform contact with the work surface and makes it possible to prepare the polycarbonate to the smallest corner.Use it dry or wet when you rinse the body shell. The 1,500 grit (y0544//03) is especially recommended for metallic paint.Contents:5 pieces PadsPainting tips:

€4.90*

Average rating of 0 out of 5 stars

y0022 HT Edge trim
Genuine HT spare/option part. Soft trim for body shell edges and cut-outs. Use speed glue for installation.Contents:1 piece / 3 metersPainting tips:

Content: 300 Zentimeter (€4.97* / 100 Zentimeter)

€14.90*

Average rating of 0 out of 5 stars

LOS250022 Losi Body Button Base and Top, Super Baja Rey / 2.0 / Super Rock Rey
Genuine Losi spare/option part. Contents:22 pieces

€9.99*

Average rating of 0 out of 5 stars

y0715 rc-car-online High tech mechanics gloves, nitrile, black
Genuine HT spare/option part. With non-slip surface perfect for delicate work, actually improving dexterity and grip.Available sizes: 8, 9 and 10.Glove size?Size 8 = 21 cm (S - L) circumferenceSize 9 = 24 cm (L - XL) circumferenceSize 10 = 27 cm (XL - XXL) circumferenceMeasure the circumference of your hand without the thumb and at the widest point (above the ankle). The tape measure should embrace the hand loosely.Norm EN388, Lining 100% polyamide.Partially coated with hightech nitrile Fits like a second skinGrips even when wetGood touch sensitivityLiquid-repellentGood resistance against oil and greaseContents:1 pair / 2 pieces3 pairs / 6 pieces

€8.90*

Average rating of 0 out of 5 stars

y6747/01 Model scissors with bent tips
Genuine HT spare/option part. Ideal for cutting polycarbonate body parts.Dimensions:Total length: 175 mmLength of edge: 35 mmContents:1 piece

€19.90*

Average rating of 0 out of 5 stars

y0673 Carbon fastening strip for FG no. 8418 - 2 pcs.
Use instead of plastic fastening strip FG # 8418/07 (for FG front bumper # 8418).Dimensions:Width: 95,7 mmHeight: 16,8 mmDistance between holes: 75 mmBore diameter: 8 mmThickness: 2 mm

€19.80*

Average rating of 0 out of 5 stars

y1481 RC-Paint Spray Gun
Fits most spray cans from many manufacturers.Convert your spray can into a spray gun. The long-lever system of this handle makes using a spray can much more convenient and provides better flow rate control as well.No more dirty hands from paint work.Contents:1 piece

€9.95*

Average rating of 0 out of 5 stars

y1474 Aluminum foil tape, self-adhesive, 50 mm x 45 meters
Genuine HT spare/option part.50 mm wide, self-adhesive aluminum foil tape, especially for heat insulation; i.e. between tuned pipe and plastic or electronic components.Content:1 piece / 45 meters

€9.90*

Average rating of 0 out of 5 stars

ARA390294 ARRMA Body Clip Retainers 1/5 Scale for Kraton / Outcast 8S
Genuine ARRMA spare/option part. Contents:4 pieces

€10.99*

Customers also viewed

Average rating of 0 out of 5 stars

58150 FG Body shell Offroad Beetle 4WD, clear
Genuine FG spare/option part. The body shell is delivered unpainted, without decal set and rear wing.500 mm wheelbaseLength: 690 mmWidth: 385 mmHeight: 240 mmContents:1 piecePainting tips:

€101.00*

Average rating of 0 out of 5 stars

32462 Wheel drives steel - 18 mm square - 9,5 mm wide - 2pcs.
Item N° 32462 Wheel drives steel - 18 mm square - 9,5 mm wide - 2pcs.18 mm square steel wheel drives, 9,5 mm wide, 0.5 mm land for running against the the wheel bearing's inner race.Two threads for M5 grub screws with 90° offset, 8 mm bore diameter for wheel shaft.Black-finished surface.

€19.39*

Average rating of 0 out of 5 stars

690000 FG Leopard 3 Competition 4WD
Der neue Allrad-Wettbewerbsbuggy Leo 3 ist mit drei Differenzialen ausgestattet. Diese neue Version ist von den 1/8 Wettbewerbsbuggys inspiriert. Durch die sehr direkte Kraftübertragung wird mehr Leistung generiert. Die Zentralbremse ist im Differential- Bock integriert. Das Modell ist mit einem Chassis aus gefrästem 5 mm T7075-Aluminium, großvolumigen Stoßdämpfern, ein Resonanzschalldämpfer und einer neuen aerodynamischen Karosserie ausgestattet. Der Motor (separat zu erwerben) wird in der Mitte mit einer Neigung zur Optimierung des Schwerpunkts eingebaut. Die Wartung dieses Modells wird durch einen schnellen Ausbau der einzelnen Teile erleichtert. Das Modell wird ohne Motor, Kupplung, Airbox und RC-Anlage geliefert.Abmessungen : Länge : 770mm Breite : 470mm Hohe : 330mm Radstand : 580mm Gewicht : 13.2kgNicht inbegriffen : Motor 26cc, 29cc Kupplung Airbox RC-Anlage

€3,199.95*

Average rating of 0 out of 5 stars

y1620 Big Bully body shell conversion kit for UFRC GR1
The conversion kit allows the mounting of the FG Monster Buggy body shells # FG 54150/01 or 54160/03 on the UFRC GR1. The side brackets are bolted to the chassis in the existing holes, replacing the roll cage. The upper brackets with their body supports also use existing threads on the shock towers for mounting, so there is no need to drill on the vehicle.Due to the slotted holes in the side brackets, the mounting height of the body can be lowered by about 15 mm if less suspension travel is required.Contents:1 set

€98.50*

Average rating of 0 out of 5 stars

FG Monster Buggy Off-Road WB535 4WD HT-Edition
Ready for an extra portion driving fun? Then try the FG Monster Buggy Pro! This aggressive looking model based on the Fun Cross chassis is extremely fast, easy to handle and very pleasant to drive. A complete package of well-tried racing technology! The model will be delivered with a clear body shell.You can select the car with complete RTR-equipment from the options menu. RTR-equipment RTR = Ready to Run. The RTR version comes ready to use with the 2,4 GHz rc-system already installed. Transmitter 2,4 GHzReceiverHigh power servo for throttle and brakeLargescale servo for steeringTx-battery, rx-battery Equipment of the modelAngled 4 mm, alloy chassis, completely covered belt drive, two differential gears at front and rear axle with hardened bevel gearwheels, closed front axle housing, front bumper, double wishbones at front and rear axle, gear brake, adjustable right/left thread rods at the track rods and at the front and rear wishbones, front uprights with steering stops, gearwheels made of case-hardened steel, completely ballbeared, four large-volume oil-pressure shock absorbers, receiver box.HT-Edition? HT-Edition means: this version comes with a big set of spare / option parts included. Steel pinions - Non-standard sizesEach of two different ratios are supplied with.Modul: m=1,5Value: 62,60 EURAlloy engine mount smallCNC machined alloy engine mounts, direkt replacement for the stock plastic parts, heat and tweak resistant.Value: 54,90 EURDriveshaft bootsProtect ball drive as well as cardan drive against dirt. 4 pairs / 8 piecesValue: 42,90 EURAlloy spur gear carrierUse for 46T - 48 teeth spur gears.Value: 39,90 EURTotal value: 200,30 EURPowerful 26 cm³ petrol engineMaintenance friendly chassis2 Differential gearsHardened driving partsCompletely ball-bearingedLarge-volume alum. dampersAggressive rim designGrip tires with 185 mm diameter and 95 mm widthReady to use Off-Road filterSimple handlingLow weightPure funThe model is equipped with a powerful 26cm³ (series) combustion engine with ready-for-use oiled air filter. The engine runs with normal 2-stroke petrol-oil mixture (available at every patrol station). The tank filling of 0,7 litres enables you to run your model around 45 minutes. With the installed pull-stat system the engine can be started without any difficulties. The RTR version is delivered with installed and preset radio control system and rechargeable batteries. To complete the non-RTR version all popular servos and radio control systems are suitable.Measures:Length: 715 mmWidth: 495 mmHeight: 360 mmWheelbase: 535 mmWeight: 10,4 kg

From €1,319.95*

Average rating of 0 out of 5 stars

AKX054 GPM aluminum a-arms front upper for Arrma Kraton / Outcast 8S
Genuine GPM spare/option part. GPM front upper aluminum a-arms for Arrma Kraton / Outcast 8S, CNC- machined from 6061-T6 aluminum. More torsion-resistant than the standard plastic parts and with an exchangeable plastic bushings for the wishbone pin.Comes complete with wishbone pins (direct replacement for original sets ARA330561 and ARA330564).Contents:2 pieces

€39.90*

Average rating of 0 out of 5 stars

8523 FG Rear shock absorber set long - 2pcs.
Shock absorber conversion kit for all 1:5 and 1:6 Ecoline models. Bulk oil-pressure shock absorber Ø20mm, experienced for years. The set contains 2 shock absorber with spring plate and spacer rings.

€55.00*
Loading...
Upload in progress, please be patient ...
Shopware-Plugin Development Shopware-Agency