y1474 Aluminum foil tape, self-adhesive, 50 mm x 45 meters

€9.90*

Available

Product number: y1474

EAN: 5024763112591

Product information "y1474 Aluminum foil tape, self-adhesive, 50 mm x 45 meters"

Genuine HT spare/option part.

50 mm wide, self-adhesive aluminum foil tape, especially for heat insulation; i.e. between tuned pipe and plastic or electronic components.

Content:

1 piece / 45 meters

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

Display reviews in current language only.

No reviews found. Share your insights with others.

Customers also bought

y0022 HT Edge trim

Genuine HT spare/option part. Soft trim for body shell edges and cut-outs. Use speed glue for installation.Contents:1 piece / 3 metersPainting tips:

Content: 300 Zentimeter (€3.30* / 100 Zentimeter)

€9.90*

6546/02 FG receiver battery Ni-MH 6V 3600mAh

Genuine FG spare/option part.Measures:Width: 111 mmHeight: 47 mmDepth: 23 mmContents:1 piece

€37.50*

y19751 Tire Tread Cutter

The tire tread cutter is required for re-cutting worn-out or creating new tread designs in order to get more grip. Cutting depth is adjustable and cutting width is approx. 3 mm.Please note: This tool is designed for cutting model tires only, not for any fullsize vehicle tires!Content:1 pieces

€79.90*

y19752 Tire tread cutter spare Blades, 5pcs.

Even though the blade will keep its edge for a long time, no cutting tool will last forever. Spare blades are available of course.Cutting width approx. 3 mmPack of 5

€9.90*

2009-33 Mecatech Klick-Shock nut

Genuine Mecatech spare/option part. Contents:2 pieces

€2.50*

This product is no longer available.

y0580 Mammoth Supergrip for 1/6 and 1/5 offroad cars glued

If you want a special combination of compounds please enter that information into the "note to us" form field at the end of the checkout process.Mammoth Supergrip for 1/6 and 1/5 offroad cars. Fits too for Formular 1 models!Parking lot / race tires for your offroad car.VersionWidthOuter diameterFront64 mm153 mmRear78 mm153 mmGlued on genuine FG rims (rear tires using extension rings), with foam rubber inserts included. Rim has 18 mm square drive with reinforcement ring.Please note: based on experience we recommend against using other manufacturers rims and extensions. Since the Mammoth tires provide very good grip the rim and the bonding must withstand high loads. Due to the high torque load on the bonding of tires on largescale cars, checking the bonding from time to time and re-glueing (y0067) if necessary is unavoidable.The Mammoth Supergrip is available in in the following compounds: Super softSoftMediumHardFront tirey0581y0582y0583y0584Rear tirey0591y0592y0593y0594General recommendation:The dirtier the track or the lower the ambient temperatures, the stickier (softer) the rear tires should be.Hint regarding the front tires: 2WD cars should use them one or two grades harder then the rears. 4WD cars usually like the same compound all around.Of course, the softer the tire the higher the wear rate; and this applies to Mammoth Supergrip onroad tires as well.The tires have a special onroad thread pattern but will still provide ideal traction after the pattern has been worn out. The white lettering on the tires has been applied for presentation purpose only. The tires will be delivered with black sidewall.Prices per unit: FrontRearMammoth Supergrip:Pair44,90 EUR49,90 EURTire inserts:Pair13,00 EUR13,00 EURFG rim:Pair14,90 EUR14,90 EURFG extension ring:Pair--.-- EUR14,90 EURMounting:Pair13,00 EUR13,00 EURTotal Price 85,80 EUR 105,70 EUR = 191,50 EUR SETTotal for 1 pair each front and rear: 169,90 EUR================================Also suitable for:With the following wheel adapter: y1183 Rim adapter

€119.90*

Similar products

y19031/01 Silicone exhaust hose extrem reinforced 22/30 mm

Genuine HT spare/option part. Very strong, multiple glas fiber layers, nevertheless very stretchable. Resist maximum temperatures up to 250°C (482°F) from.Needs hose clamps with at least 35 mm inner diameter! Maße:Inside diameter: 22 mm Outside diameter: 30 mmWall thickness: 4 mmLength: 50 mmContents:1 piece

€9.90*

7407/03 FG Silicon tube Ø45 x 10 x 2mm

Genuine FG spare/option part.Replacement part for 7407 CFRP supporting brace f. Tun. pipe, set Contents:2 pieces

€4.50*

7117 Samba 7 Connecting set for Samba 7 and Samba 8 / new Version

Genuine Samba spare/option part.Connecting springs for Samba 7 and 8 pipes in the latest version.Dimensions:Length: approx 18 mmWire thickness: 0,8 mmContents:8x Connection springs2x Silicone damperring2x Viton O-Ring 20 x 2,5 mm

€12.90*

6402/01 FG Exhaust hose

Genuine FG spare/option part. Heavy gauge teflon tube for connection between exhaust manifold and tuned pipe with da inside diameter from 21 mm and a length from 50 mm.You may have to heat the tube with a cigarette lighter for installation.Contents:1 piece

Content: 5 Zentimeter (€244.00* / 100 Zentimeter)

€12.20*

y1105 Exhaust port and carburetor intake cover plates, for most usual 23cc - 30cc engines

Exhaust port and carburetor intake cover plates, made of 1 mm aluminum, fits most current 23cc - 30cc rc-car engines.Exhaust port cover:Total: approx. 20 x 45 mmMounting holes (ctr./ctr.): approx. 34 mm carb intake cover:Total: ellipse approx. 28 x 40 mmMounting holes (ctr./ctr.): approx. 31 mm

€4.90*

y0387 Exhaust hose with grooves for hose clamps

Heavy gauge exhaust hose with grooves for the hose clamps. Dimensions:Length: 54 mmGroove diameter: 25 mmOuter diameter: 28 mmInner diameter: approx. 15 mm

€6.90*

7110 Samba Installation kit for 50 mm pipes

Genuine Samba spare/option part. Fits Samba F1 Titanium RS5, Samba F1 Titanium FG, Samba 6 Titan, Samba 7, No. FG #7406 FG Steel Side Power and many other tuned pipes with a diameter of 50 mm. Please check first whether the installed pipe mount has the right height in the car so that the alignment of the tuned pipe to engine is still appropriate.Contents:1 set

€29.90*

y0393 Mounting wire for Samba pipes - 1pce.

Wire diameter 2.5 mm, cut and bend as needed.

€3.90*

y1444/01 Temperature resistant cable ties 4,8 x 290 mm

Genuine HT spare/option part. Particularly advantageous for installation of tuned pipe exhausts. Content:20 pieces

€4.95*

7111 Samba 7 Connecting set

Genuine Samba spare/option part.Connecting springs for Samba 7 pipes.Dimensions:Length: approx 18 mmWire thickness: 0,8 mmContents:8x Connection springs2x Silicone damperring2x Viton O-Ring 20 x 1,5 mm

€12.90*

7407/01 FG CFK mount

Genuine FG spare/option part. Content:1 piece

€23.90*

7407 FG CFRP supporting brace for Tuned pipe, set

Genuine FG spare/option part.Carbon fibre supporting brace with fittings and mounting material for the FG Competition, EVO and 1:5 Sportsline models 2WD and 4WD for a lateral fixing of Tuning pipes with a diameter of approx. 50 mm.

€35.10*

Customers also viewed

7072/01 FG Adjustable rear lower wishone for 1:5

Genuine FG spare/option part.Contents:1 piece

€19.90*

6738/03 FG Self-locking hexagon nut M3, 15 pcs.

Genuine FG spare/option part.Part is delivered in silver or black color from vendor!Content:15 pieces

€2.80*

y0022 HT Edge trim

Genuine HT spare/option part. Soft trim for body shell edges and cut-outs. Use speed glue for installation.Contents:1 piece / 3 metersPainting tips:

Content: 300 Zentimeter (€3.30* / 100 Zentimeter)

€9.90*

Mecatech FW01 Touring car, wheelbase 510 mm, Chassis Kit -- Europe- and world champion

The Mecatech FW01 is for sure the currently most innovative 1/5 race car designed for the dedicated and technically enthusiastic rc car driver.Everyone is enthusiastic about the perfectly fitting and precise workmanship at the highest level. Only high quality materials are used for the production.Since many years Mecatech is a well-know premium manufacturer of largescale hydraulic brakes or shocks and, as only a few may know, a technology expert for a number of Formula 1 racing teams!The Chassis Kit of the FW01 is particulary intended for "switchers" and "newcomers" and differs from the Basic kit in that the brakes and shock absorbers are already included in the Chassis Kit. Here is a list of the parts that are required for completion:brakes and shocks (Difference to Chassis Kit)DifferentialEngine Clutch, Airbox and tuned pipe systembody shell and tiresElectonic components such as servos, batteries and Remote controlStock gearing:Clutch pinion / spur gear: 36T / 64TLayshaft pinion / differential: 24T / 73T Currently the Mecatech FW01 is for sure the benchmark of the 1/5 scale racing scene! In the first year Markus Feldmann won with his FW01 1: 5 Mecatech on one of the world's finest and most demanding race track in Lostallo / SwitzerlandMecatech is multiple German, European and World Champion with the FW01 and as the last result:Markus Feldman wins the European Championship in Tourlaville/France. All top 5 positions went to drivers running a Mecatech FW01. 7 out of 10 finalists cars were Mecatech FW01.Although the fit of the Mecatech FW01 parts makes the assembly of the car a great experience, some of our customers want to use the expertise of our shop and wish their FW01 fully assembled and tuned in by us!The complete assembly of your FW01 by our workshop is possible for an additional charge. Please note that the costs of the full assembly with servos a.s.o. do not include the price of any rc-components. If you do not have a suitable radio system with servos and batteries as well as switch and charger, you have to take an additional EUR 800 to EUR 1,500 for this equipment into account. We will be happy to make you an appropriate offer. We are currently waiting for the latest version of the Mecatech FW01.Included in the chassis kit:- All pinions- clutch bell- Coupling fixation- All parts and screws for mounting the enginenot included:- differential- Engine and linkage- body shell and spoilers- Airbox- clutch - engine- Electronics- TiresWe are currently waiting for the latest version of the Mecatech FW01.

€2,670.00*

y1528 Bearing puller for differentials

Genuine HT spare/option part. Bearing puller especially for the disassembly of ball bearings from differentials.The arms are reliably fixed at the set distance by an adjustment cone, which makes the use of this puller very easy. The thin hooks allow the use even with little space between ball bearing and differential.Dimensions: Min. opening width: 17 mm Max. opening width: 50 mm Max. height from the Clutch: 25 mmContents:1 piece

€19.90*