y1247 Hobbythek/GPM Dirt-Cover line for Carson Wild GP Attack, HPI Baja, Hell-Devil, CRT 4x4, Thunderbolt models, set

€39.90*

Available

Product number: y1247

Product information "y1247 Hobbythek/GPM Dirt-Cover line for Carson Wild GP Attack, HPI Baja, Hell-Devil, CRT 4x4, Thunderbolt models, set"

Regular price: 53,80 EUR

Fits Carson Wild GP Attack, Gas Devil, Hell Devil, Thunderbolt, HPI Baja and the new FG Leopard 2WD and 4WD car.

Content of delivery:
- y0515 GPM Shock-Cover for Carson Wild GP Attack, HPI Baja, Hell-Devil, CRT 4x4, Thunderbolt
- GPM Air filter cover, no. BJAFCO
- GPM Starter cover, no. BJPSCO

y0515 GPM Shock-Cover for HPI Baja, Hell-Devil, CRT 4x4, Thunderbolt
These protective covers prevent the shock piston rods and seals from wear caused by dirt. They fit most 1/6 and 1/5 scale shocks.

Does not fit FG, Carson (thin shocks) , Smartech, Conrad!

- 2 pcs length 160 mm / 2 pcs length 180 mm for all HPI Baja, Hell-Devil, Gas Devil, CRT 4x4, Thunderbolt and all shocks with a spring diameter from 26 to 40 mm.

Set of 4.
Please note that the shocks shown in the picture are for presentation purpose only and not included.

GPM Air filter cover, no. BJAFCO
GPM air filter cover which fits easily over your existing air filter. A rubber band at the bottom holds the cover in place. Maintenance of the main filter will be significantly reduced, especially in very dusty environments. Fits all common filters, foam or fabric (K&N) style.

GPM Starter cover, no. BJPSCO
Keeps cool air coming to your engine by keeping dirt and grass from clogging up the pull starter area. Easily wipe off anything not deflected away. Installs on the starter cover with hook & loop tape. With metal cable management.

When using the FG monster / stadium model is cut an additional hole for the support of the lateral support plate.

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

No reviews found. Share your insights with others.

Accessories / Spare parts

y0566 Replacement hook-and-loop tape for GPM starter cover and GPM Crankcase cover

Genuine HT spare/option part. For GPM starter cover and GPM Crankcase cover.Dimensions:Width: 8 mmLength: 400 mmContents:1 piece

€3.90*

Kunden haben auch gesehen

y1246, Hobbythek/GPM Dirt-Cover line for FG, Carson/Smartech and Conrad cars, set

Regular price: 51,80 EURhe set is suitable for all FG models + Carson/Smartech/Reely (not for FG Leopard + Carson Gas Devil, Hell Devil, CRT 4x4, Smartech Thunderbolt), please use order no. y1247.Content of delivery:- y0514 GPM Shock-Cover für FG, Carson, Smartech, Conrad- GPM Air filter cover, no. BJAFCO- GPM Starter cover, no. BJPSCO y0514 GPM Shock-Cover für FG, Carson, Smartech, ConradThese protective covers prevent the shock piston rods and seals from wear caused by dirt. They fit most 1/6 and 1/5 scale shocks. Not for Gas Devil, Thunderbolt, Helldevil, CRT 4x4!- total length 150 mm for all FG / Carson / Smartech / Conrad and all shocks with a spring diameter from 22 to 30 mm.Set of 4GPM Air filter cover, no. BJAFCOGPM air filter cover which fits easily over your existing air filter. A rubber band at the bottom holds the cover in place. Maintenance of the main filter will be significantly reduced, especially in very dusty environments. Fits all common filters, foam or fabric (K&N) style.GPM Starter cover, no. BJPSCO Keeps cool air coming to your engine by keeping dirt and grass from clogging up the pull starter area. Easily wipe off anything not deflected away. Installs on the starter cover with hook & loop tape. With metal cable management.When using the FG monster / stadium model is cut an additional hole for the support of the lateral support plate.

€39.50*

TT0900/15 Top Tuning Electric tool set

Original Top Tuning Ersatz-/Tuningteil.Includes piston blocker and flywheel puller, spare part for electric starter unit TT0900.Inhalt:1 Stück

€45.00*

y0045 GPM Crankcase cover for 1/5 & 1/6

To ensure the required cooling for current 1/5 and 1/6 engines the flywheels have fins on both sides. Therefore the fan housing has large openings on the crankcase side for the required air supply. However, the risk of foreign objects (grass, sand, or even stones!) entering here Is very high! As a result, broken fins on the flywheel occur frequently. This leads to reduced cooling efficiency and - even more critical vibrations from a flywheel which is out of balance due to missing fins. Therefore, this kind of flywheel protection is highly recommended, especially for offroad use. The product video explains the handling in detail! Note:It is essential to thoroughly clean and degrease the crankcase prior to attaching the hook-and-loop tape (OKS2661)!For installation on Chung-Yang and Zenoah engines in FG cars, the crankcase cover must be slightly modified in two places where the engine mount is attached (see Figure 6 and 7). Furthermore the fit of the fabric must be as tight as possible in the region of the layshaft pinion (in front of the differential ring gear!) (see Figure 8).Set includes:Special tailored fabric with sewed on hook-and-loop tapehook-and-loop tape for installation to the crankcaseAdhesive for securing the hook-and-loop tape

€24.90*

y0513/01 GPM Set Clutch bell, Steel pinions 16T and 18T

Complete set with clutch bell and one each 16T and 18T steel pinion.GPM clutch bell with 5 mm pinion bolt. CNC-machined one-piece bell for absolute true running. Inclusive mountings.GPM 16T and 18T steel pinions are profile regraded. This allows for a change in gearing by a pinion swap alone.Module: m=1,5Profile regraded means that the number of teeth is changed while the diameter remained constant. The part of the involutes? curve that defines the tooth profile is changed. Positively regraded (lower number of teeth) pinions are stronger and run smoother, the reduced strength of negatively regraded pinions doesn?t really matter.Content of delivery:GPM steel clutch bell SBJ613GPM steel pinion 16T SBJ016TOGPM steel pinion 18T SBJ018TO

€89.90*

y0056 HT - Carson Wild GP Attack and HPI Baja 5B/SS/5T/5sc premium front disk brake

Normal price: 249,90 EUR Tuning front disk brake system for the HPI Baja 5B/SS/5T/5sc, the conversion kit includes all necessary parts. The brake includes the finest parts available for a cable brake and has the following features: * uses existing mounting points for all parts * brake pads and 70 mm diameter stainless rotors made by RS-5, the best performing combination available * hardened stud bolts for the brake pads * billet brake levers, no tweak and best transfer of servo power * ultraflex bowden cables * brake cams run in hardened steel bushings and brass guide plates (miniature bearings don't last in offroad cars) * billet alloy bowden cable support block with adjustment screws * billet alloy bowden cable mounts at the calipers * pre-assembledOn a 5T the stud bolts which hold the brake pads will interfere with the ribs in the rim. However, modifying the rim or swapping the stud bolts for long csh screws allows for installation on a 5T.Spare parts for this brake as a PDF-file with spare part numbersWe highly recommend the installation of a stronger throttle servo to take full advantage of this brake system. The is an excellent choice.

€239.90*

7475/03 FG Alloy ball-and-socket joint Ø10x9,5mm - 2pcs.

Alloy ball-and-socket joints with surface coating, 70% less weight.Bore diameter 4 mm

€5.90*

Cutsomers also bought

305013 Bull bar, CM-6

€18.90*

305224 Hinge pin set Gas Devil

Genuine Smartech spare/option part.Content:1 set

€22.90*

305187 / s054041 Suspension holder 2 Carson / Smartech 4x4

Genuine Smartech spare/option part.Content:2 pieces

€22.90*

y1107 Steel balljoints 5mm/M8, with conical spacers

Genuine HT spare/option part. Two balljoints 5mm/M8 with four conical spacers, to replace FG #6029/1 + balls (Set content like FG 4429/1).Fits almost for all 1/5 and 1/6 scale cars.The maintenance-free rod ends with the sliding contact surface combination steel/ bronze composite feature a spherical plain bearing with a brass outer ring which is lined with a layer of bronze web in to which PTFE with molybdenum disulphide has been rolled. Contents:2 pieces

€14.90*

305186 / s054040 Suspension holder 1 Carson / Smartech 4x4

Genuine Smartech spare/option part.Content:2 pieces

€22.90*