y1137/07 GPM-Big Bore Premium shock absorber for Carson C5, FG Sportsline TW models, set
y0038 Viscosity:
y0038/1500 - Viscosity: 1500+ 2.6EUR
Genuine silicone shock absorber oil for the optimal shock absorber set-up. Content: 50 ml Please note: Factory filling of FG/Losi/Smartech and many other 1/5 and 1/6 scale shocks is done with genuine silicone shock absorber oil. To ensure seal tightness and consistency you should only use genuine silicone shock absorber oil for refilling as well.Most every rc-car shock absorber uses silicone oil of different viscosities. The smaller the number, the lower the viscosity of the silicone oil and the softer the damping. As a rule of thumb: Viscosity 100 = similar to water Viscosity 1.000 = similar to cooking oil Viscosity 5.000 = similar to shampoo Viscosity 10.000 = similar to honey As a reference: The red FG Marder / Off-Road Buggy series shock absorbers are factory filled with 2.000 viscosity oil, the shocks on monster cars with dual shock set-ups (total of 8 shocks) are filled with 1.000 viscosity oil, and the shocks on FG onroad cars come filled with 4.000 viscosity oil. The original filling of the Losi 5ive-T is 350cc silicone oil.FG Silicone oil with 50 ml:FG Item N° 6510/010 = Viscosity: 100FG Item N° 6510/025 = Viscosity: 250FG Item N° 6510/035 = Viscosity: 350FG Item N° 6510/050 = Viscosity: 500FG Item N° 6510/075 = Viscosity: 750FG Item N° 6510/100 = Viscosity: 1000FG Item N° 6510/150 = Viscosity: 1500FG Item N° 6510/200 = Viscosity: 2000FG Item N° 6510/300 = Viscosity: 3000FG Item N° 6510/400 = Viscosity: 4000FG Item N° 6510/500 = Viscosity: 5000FG Item N° 6510/600 = Viscosity: 6000FG Item N° 6510/700 = Viscosity: 7000FG Item N° 6510/800 = Viscosity: 8000FG Item N° 6510/900 = Viscosity: 9000FG Item N° 6511 = Viscosity: 10000Viscosity of silicone oil at various temperatures.
Content: 50 Milliliter (€231.00* / 1000 Milliliter)
Variants from €8.95*
These cask shaped springs are especially designed to fit the diameters of Mecatech Klick-Shocks and Mecatech Big Bore shocks.Springs:y0453 green 2,5mmy0455 black 3,0 mmDimensions: Inner diameter, upper: 20,5 mm Inner diameter, lower: 16,5 mm Outside diameter: 29,5 mm Length: 52,5 mm
Product information "y1137/07 GPM-Big Bore Premium shock absorber for Carson C5, FG Sportsline TW models, set"
Set consists of 4 dampers.
Premium version, suitable for FG, Carson / Smartech etc.
Fully assembled and filled.
Special features:
16 mm inner diameter for higher oil volume
Volume equalisation
Housing and screw connections made entirely of aluminium
Hard anodised housing
Precision piston made of Delrin, machined (no moulded part!)
Aluminium piston rod base and aluminium spring plate
Replaceable bearing bushes in the mounting eyes
Pre-filled with 1500/2000 silicone oil.
For the following models:
Smartech C5 and FG Sportsline 1:5 touring cars 2WD and 4WD
Set
contents:
Four short dampers with damper feet
For damper version y1137/07 and y1137/08 for Smartech C5 and FG smooth track models the spring y0452/02.
Silicone oil recommendation:
The GPM-Spezial shock absorbers are filled with silicone oil viscosity 1500 and 2000.
This viscosity provides very good damping properties at normal outside temperatures.
I
f softer damping is required, we recommend using oil with a viscosity of 1000 or 1500;
for harder damping, use 2500 or higher.
One 50 ml bottle of y0038 is sufficient for five long or six short dampers.
Login
Similar products
Original GPM Ersatz-/Tuningteil.Shock absorber for Super Baja Rey (incl. 2.0) with external volume compensation in all-metal design, spring perches and lower ball joints are also made of aluminum. Oversized 7 mm diameter piston rod. Dimensions springs front: 9 coils 2,5 mm wire thickness approx. 88 mm free length 24 mm inner diameter Mounting hole spacing: extended approx. 134 mm, compressed approx. 103 mm. Dimensions springs rear: 9 coils 2,5 mm wire thickness approx. 117 mm free length 24 mm inner diameter Mounting hole spacing: extended approx. 171 mm, compressed approx. 123 mm. Inhalt:2 pair / 4 pieces
Set consists of 4 dampers. Premium version, suitable for FG, Carson / Smartech etc. Fully assembled and filled. Special features: 16 mm inner diameter for higher oil volume Volume equalisation Housing and screw connections made entirely of aluminium Hard anodised housing Precision piston made of Delrin, machined (no moulded part!) Aluminium piston rod base and aluminium spring plate Replaceable bearing bushes in the mounting eyes Pre-filled with 1000 silicone oil. For the following models: Kyosho Scorpion XXL
Set contents: Four short dampers with long damper feet. We recommend our progressive off-road tuning shock absorber springs from the "Dirt-Spring M" series, part number y0321, for the shock absorbers. The original springs can also be used on FG models! Silicone oil recommendation: The GPM-Spezial Cross shock absorbers are filled with silicone oil viscosity 1000. This viscosity provides very good damping properties at normal outside temperatures. If softer damping is required, oil with a viscosity of 500 or 600 is recommended; for harder damping, 1500 or higher is recommended. One 50 ml bottle of y0038 is sufficient for five long or six short dampers.When installing in a Kyosho Scorpion XXL (version 6), the dampers on the front axle must be shimmed by 4mm (see picture above!). The original Scorpion springs can still be used. We recommend a silicone oil with a viscosity of 100-200 for the front axle and a silicone oil with a viscosity of 200-300 for the rear axle.
Product information "y1137/01 GPM-Big Bore Premium shock absorbers for FG, Carson/Smartech 2WD, set"
Set consists of 4 shock absorbers. Premium version, suitable for FG, Carson / Smartech etc. Fully assembled and filled. Special features:
16 mm inner diameter for higher oil volume
Volume equalisation Housing and screw connections made entirely of aluminium Hard anodised housing Precision piston made of Delrin, machined (no moulded part!) Aluminium piston rod base and aluminium spring plate Replaceable bearing bushes in the mounting eyes Pre-filled with 1000 silicone oil. For the following models: FG 2WD: Marder, Off-Road Buggy, Beetle, Monster Beetle Carson 2WD: Comanche, Attack Evo, CRT, CPT, Smartech monster truck Set contents:
Two long and two short dampers.We recommend our progressive off-road tuning shock absorber springs from the "Dirt-Spring M" series for the shock absorbers. The original springs can also be used on FG models! Silicone oil recommendation:
The GPM-Spezial Cross shock absorbers are filled with silicone oil viscosity 1000. This viscosity provides very good damping properties at normal outside temperatures. If softer damping is required, oil with a viscosity of 500 or 600 is recommended; for harder damping, 1500 or higher. One 50 ml bottle is sufficient for five long or six short dampers.
Product information "y1137/02 GPM-Big Bore Premium shock absorbers for FG Monster/Stadium Truck 2WD, set" Set consists of 4 shock absorbers. Premium version, suitable for FG, Carson / Smartech etc. Fully assembled and filled. Special features: 16 mm inner diameter for higher oil volume
Volume equalisation
Housing and screw connections made entirely of aluminium Hard anodised housing
Precision piston made of Delrin, machined (no moulded part!)
Aluminium piston rod base and aluminium spring plate Replaceable bearing bushes in the mounting eyes
Pre-filled with 1000 silicone oil. For the following models:
FG 2WD:
Monster Truck, Monster Jeep, Monster Hummer, Monster Beetle Pro, Stadium Truck, Stadium Jeep, Stadium Hummer
Set contents: Four long shock absorbers We recommend our progressive off-road tuning shock absorber springs from the "Dirt-Spring M" series, part number y0321, for the shock absorbers. The original springs can also be used on FG models! Silicone oil recommendation: The GPM-Spezial Cross shock absorbers are filled with silicone oil viscosity 1000. This viscosity provides very good damping properties at normal outside temperatures. If softer damping is required, oil with a viscosity of 500 or 600 is recommended; for harder damping, 1500 or higher is recommended. One 50 ml bottle of y0038 is sufficient for five long or six short dampers.
Set consists of 4 dampers. Premium version, suitable for FG, Carson / Smartech etc. Fully assembled and filled. Special features: 16 mm inner diameter for higher oil volume
Volume equalisation Housing and screw connections made entirely of aluminium Hard anodised housing Precision piston made of Delrin, machined (no moulded part!) Aluminium piston rod base and aluminium spring plate Replaceable bearing bushes in the mounting eyes Pre-filled with 1000 silicone oil. For the following models: FG 4WD:
Marder, Off-Road Buggy Set contents: Four long shock absorbers, one pair of shock absorbers has the upper mount with 5 mm bore. We recommend our progressive off-road tuning shock absorber springs from the "Dirt-Spring M" series, part number y0321, for the shock absorbers. The original springs can also be used on FG models! Silicone oil recommendation: The GPM-Spezial Cross shock absorbers are filled with silicone oil viscosity 1000. This viscosity provides very good damping properties at normal outside temperatures. If softer damping is required, oil with a viscosity of 500 or 600 is recommended; for harder damping, 1500 or higher is recommended. One 50 ml bottle of y0038 is sufficient for five long or six short dampers.
Fully assembled and factory filled with 1.000 viscosity silicone oil. Including springs which can be adjusted via a threaded collar. The excellent quality GPM shocks fit all cars of the HPI Baja 5 series, Carson Wild GP Attack and feature an extremely massive 7 mm rod. The GPM shocks cases and rod ends are completely made of aluminum and equipped with replaceable bushings at the upper and lower mounting points.The external volume control is more efficient than built-in versions with membrane or foam element. Compared with the technically similar solution of a floating balance piston inside of the shock absorber body there is the advantage that no length of the shock absorber is needed for the volume compensation. Furthermore the additional housing surface of the equalizing chamber helps in cooling the oil. Dimensions (front):distance between mounting holes (extended): 187 mm travel: 62 mm li> Outer diameter: 28 mm Mounting specifications: top and bottom 12 mm wide ball mount with 4 mm bore The GPM shocks are filled with 1.000 viscosity silicone oil. For a firmer setting 1.500 or higher viscosity silicone oil is recommended. If a softer setup is required, 900 or lower viscosity oil should be used.
Original GPM Ersatz-/Tuningteil.Shock absorber for Super Baja Rey (incl. 2.0) with external volume compensation in all-metal design, spring perches and lower ball joints are also made of aluminum. Oversized 7 mm diameter piston rod.Mounting hole spacing: extended approx. 134 mm, compressed approx. 103 mm. Dimensions springs: 9 coils 2,5 mm wire thickness approx. 88 mm free length 24 mm inner diameter Contents:2 pieces
Original GPM Ersatz-/Tuningteil.Shock absorber for Super Baja Rey (incl. 2.0) with external volume compensation in all-metal design, spring perches and lower ball joins are also made of aluminum. Oversized 7 mm diameter piston rod.Mounting hole spacing: extended approx. 171 mm, compressed approx. 123 mm.Can be installed on Super Rock Rey as well, but you have to remove the suspension limiting straps. Dimensions springs: 9 coils 2,5 mm wire thickness approx. 117 mm free length 24 mm inner diameter Contents:2 pieces
Fully assembled and factory filled with 1.000 viscosity silicone oil. Including springs which can be adjusted via a threaded collar. The excellent quality GPM shocks fit all cars of the HPI Baja 5 series, Carson Wild GP Attack and feature an extremely massive 7 mm rod. The GPM shocks cases and rod ends are completely made of aluminum and equipped with replaceable bushings at the upper and lower mounting points.The external volume control is more efficient than built-in versions with membrane or foam element. Compared with the technically similar solution of a floating balance piston inside of the shock absorber body there is the advantage that no length of the shock absorber is needed for the volume compensation. Furthermore the additional housing surface of the equalizing chamber helps in cooling the oil. Dimensions:distance between mounting holes (extended): 207 mm travel: 69 mm li> Outer diameter: 28 mm Mounting specifications: top and bottom 12 mm wide ball mount with 4 mm bore The GPM shocks are filled with 1.000 viscosity silicone oil. For a firmer setting 1.500 or higher viscosity silicone oil is recommended. If a softer setup is required, 900 or lower viscosity oil should be used.
Genuine GPM spare/option part. The GPM piggyback reservoir shocks increase the oil volume and the separate vent screw makes filling the shocks easier. Shocks come in pairs including all-metal lower ball joints, spring perches and two pairs of springs with 2.6 mm and 2.8 mm wire diameter. Reinforced shock shafts with 6 mm diameter.Fits Arrma Kraton 8S front suspension application only!Length extended/compressed (center-to-center of mounting points): approx. 180 mm/125 mm.Contents:1 set
Set consists of 4 dampers. Premium version, suitable for FG, Carson / Smartech etc.
Fully assembled and filled. Special features: 16 mm inner diameter for higher oil volume Volume equalisation Housing and screw connections made entirely of aluminium Hard anodised housing Precision piston made of Delrin, machined (no moulded part!) Aluminium piston rod base and aluminium spring plate Replaceable bearing bushes in the mounting eyes Pre-filled with 1000 silicone oil. For the following models: FG 4WD:
Monster Truck, Monster Jeep, Monster Hummer, Stadium Truck, Stadium Jeep, Stadium Hummer, Off-Road Beetle Set contents:
Four long dampers with 5 mm mount in the upper damper caps. Damper feet one pair short, one pair long (4WD MT version). We recommend our progressive off-road tuning shock absorber springs from the "Dirt-Spring M" series, part number y0321, for the shock absorbers. The original springs can also be used on FG models! Silicone oil recommendation: The GPM-Spezial Cross shock absorbers are filled with silicone oil viscosity 1000. This viscosity provides very good damping properties at normal outside temperatures. If softer damping is required, oil with a viscosity of 500 or 600 is recommended; for harder damping, 1500 or higher is recommended. One 50 ml bottle of y0038 is sufficient for five long or six short dampers.
2 pairs of shock absorbers, set
Please select shock absorber version!
Check which version you need!
y1137/01 for FG, Carson 2 WD models
y1137/02 for FG Monster/Stadium Truck 2 WD models
y1137/03 for FG Marder/Offroad Buggy 4 WD models
Y1137/04 for FG Monster/Stadium Truck 4 WD models
y1137/05 for Carson 2 WD models
y1137/06 for Kyosho Scorpion XXL models
y1137/07 for Carson C5 and FG Sportsline TW models
Y1137/08 for FG Evo models up to 2014
y1137/09 for FG Evo 2020 models from 2015 onwards
GPM-Spezial Cross shocks, premium full metal version.Assembled and filled.Special features:
16 mm shock bore for increased capacity
volume compensation
shock body and caps machined from billet aluminum
hard anodized shock body
machined precision delrin pistons (not injection molded!)
aluminum shaft end and spring retainer
shock caps with replaceable bushings
factory filled with 1000
GPM-Spezial Cross shocks, premium full metal version. >Assembled and filled.
volume compensationshock body and caps machined from billet aluminumhard anodized shock bodymachined precision delrin pistons (not injection molded!)aluminum shaft end and spring retainershock caps with replaceable bushingsfactory filled with 1000 filling quantityshort 7mllong 9mlLong and short version availble in the following sets:
y1137/01 Version 1
FG 2WD: Marder, Off-Road Buggy, Beetle, Monster BeetleCarson 2WD: Comanche, Attack Evo, CRT, CPT, Smartech Monster-Truck
Set includes: 2 each long and short shocks
y1137/02 Version 2
FG 2WD: Monster-Truck, Monster Jeep, Monster Hummer, Monster Beetle Pro, Stadium Truck, Stadium Jeep, Stadium Hummer
Set includes: 4 long shocks
y1137/03 Version 3
FG 4WD: Marder, Off-Road Buggy
Set includes: 4 long shocks, one pair features 5 mm upper mounting bore
y1137/04 Version 4
FG 4WD: Monster-Truck, Monster Jeep, Monster Hummer, Stadium Truck, Stadium Jeep, Stadium Hummer, Off-Road Beetle
Set includes: 4 long shocks with a 5 mm mounting hole in the upper shock cap; 1 pair with standard lower shock mounts, the other pair with long lower shock mounts (4WD MT version)
y1137/05 Version 5
Carson 2WD: Attack, Super Attack, Gas Blaster, Big AttackSmartech 2WD: UNO, Spider, Duratrax, Firehammer
Set includes: 2 each long and short shocks with spacers for the front
y1137/06 Version 6
Kyosho Scorpion XXL
Set includes:4 short shocks with long shock mounts
y1137/07 Version 7
Smartech C5 and FG Sportsline 1:5 touring cars 2WD and 4WD
Set includes: 4 short shocks equipped with shock mounts
y1137/08 Version 8
FG-Evo Modelle: 2008 - 2011 and Evo from 2012 an up
Set includes: 4 short shocks equipped with shortened shock mounts
y1137/09 Version 9
FG-Evo Modelle:2020 and 2020.1 from 2015
Set includes:4 short shocks equipped with shortened shock mounts
Overall length, extended: long 155 mm, short 131 mm
Mounting distance, extended: long 144,5 mm, short 120,5 mm
Travel: long 43,5 mm, short 30,5 mm
Inner diameter of spring: 21 mm
Shock body diameter: 20 mm
Eye bore: 4.5 mm
Eye thickness: top 6 mm, bottom 5 mm
Shaft diameter: 4 mm
Shaft thread: M4
We recommend our progressive y0452/02. for these shocks. On FG cars the OEM springs can be used as well. Shock versions y1137/07 and y1137/08 for Smartech C5 and FG on-road cars should use spring Shock oil recommendations:The GPM-Spezial Cross shocks are factory filled with 1000 viscosity silicone oil. This gives a very good shock performance at normal ambient temperatures.When a softer shock is required, you can go for 500 or even 600 viscosity oil; 1500 and up if you prefer more damping.One 50 ml bottle fills 5 long or 6 short shocks.For use in a Kyosho Scorpion XXL (version 6), the shocks must be installed with an additional 4 mm spacer at the lower front mount (see picture above). The stock Scorpion springs can be used. We suggest silicone oil with a 100 to 200 viscosity for the front and a 200 to 300 viscosity for the rear .Introductory price! Regular price: 129,90 EUR / set
Customers also viewed
Set consists of 4 dampers. Premium version, suitable for FG, Carson / Smartech etc. Fully assembled and filled. Special features: 16 mm inner diameter for higher oil volume Volume equalisation Housing and screw connections made entirely of aluminium Hard anodised housing Precision piston made of Delrin, machined (no moulded part!) Aluminium piston rod base and aluminium spring plate Replaceable bearing bushes in the mounting eyes Pre-filled with 1500/2000 silicone oil. For the following models: FG-Evo models:
2008 - 2011 and Evo from 2012 Set contents: Four short dampers with modified (shortened) damper feet
For damper version y1137/07 and y1137/08 for Smartech C5 and FG smooth track models the spring y0452/02. Silicone oil recommendation: The GPM-Spezial shock absorbers are filled with silicone oil viscosity 1500 and 2000. This viscosity provides very good damping properties at normal outside temperatures. If softer damping is required, we recommend using oil with a viscosity of 1000 or 1500; for harder damping, use 2500 or higher. One 50 ml bottle of y0038 is sufficient for five long or six short dampers.
These cask shaped springs are especially designed to fit the diameters of Mecatech Klick-Shocks and Mecatech Big Bore shocks.Springs:y0453 green 2,5mmy0455 black 3,0 mmDimensions: Inner diameter, upper: 20,5 mm Inner diameter, lower: 16,5 mm Outside diameter: 29,5 mm Length: 52,5 mm
%
Wide neck flask with 50 ml.The "work of the devil!" The smell is normal! Among others this lubricant is suitable for the following model car applications:Drive shafts (if covered with boots)Transmission in enclosed housings (i.g. ring & pinion gears in Losi 5ive-T or Desert Buggy XL)Differentials which do not use friction padsChesterton® 787 Sliding Paste is a premium quality pure synthetic lubricant that will function effectively even at ultra high temperatures and pressures. Designed for the most severe operating conditions, it provides, through a novel chemical approach, lubrication at pressures up to 10687 kg/cm2 and 538°C.787 Sliding Paste is a unique thixotropic hybrid lubricant. Consisting of a semi-soft paste-like material, this product will flow to fill in small tolerances, yet will keep metal parts separated by the microscopic, symmetric, plates which slide over each other and provide effective lubrication long after the clean synthetic base oil has burned off. Applications for Chesterton 787 Sliding Paste can be found anywhere a need exists for a clinging semi-solid lubricant that will resist water washout and can withstand high temperatures and pressures. Unlike a grease which can turn to liquid and fail under extremely high loads and temperatures, 787 will maintain a slippery film on surfaces and prevent wear, galling and seizure at temperatures unthinkable for a grease. Use in such high temperature applications as lubrication of welding equipment, steel production facilities, smelting factories, forging furnaces, metal casting foundries, around exhaust stacks in power stations, turbine exhaust areas, and any other area exposed to extreme conditions. Because of its excellent resistance to water washout, the product works extremely well in outdoor applications such as on railroad switching equipment and wire rope cables.Composition:Chesterton 787 Sliding Paste is a unique hybrid material that suits the requirements of todays hotter running equipment. It consists of a combination of both organic and inorganic lubricating components and will perform effectively at temperatures ranging from -23°C to 538°C. The geometry of the solid constituents in 787 Sliding Paste is such that they slide over one another and remain undistorted even at the highest pressures parts and equipment are likely to see. The symmetry of the particles means they can withstand extra stresses compared to some inorganic materials which can shatter under extreme loads. The base oil used in Chesterton 787 Sliding Paste is a pure synthetic that will burn cleanly and leave no carbon or varnish to gum up parts and equipment. Because it contains no petroleum oils, it does not present the clean-up problems associated with waste petroleum residues.Features:Pure Non-Carbonizing, Synthetic Base n Lubricates at pressures to 10687 kg/cm n Withstands Temperatures to 538°CExcellent Water Washout Resistance n Non-Fling, Clinging LubricantLow Coefficient of FrictionNSF H2 - Registration number 133956 n No Toxic Heavy MetalsUltra-Fine ParticlesUnique 3 Phase Lubrication PackageApplications:Use in areas subject to extremes in temperature including smelting, forging, metal refining, glass manufacturing, plastics production, and in chemical, petrochemical and power plants, in foundries, around exhaust stacks, on rotary kilns in the cement and mining industry, etc. 787 is specifically designed to provide lubrication for surfaces subjected to extreme pressure. This would include wire ropes, cranes, railroad switch gear, and on large open gears on doors and bridges.Stem nuts, Lead screws, and Linear actuatorsFlange bolts and High tension studs n Press fit bushingsDirections:Brush or pump 787 Sliding Paste into areas needing to be lubricated. Product can be applied by squirt oiler. Spread evenly to thoroughly lubricate all parts and equipment which will see friction.Safety:Before using this product, please review the or appropriate safety data sheet for your area.
Content: 50 Milliliter (€258.00* / 1000 Milliliter)
Product information "y1137/01 GPM-Big Bore Premium shock absorbers for FG, Carson/Smartech 2WD, set"
Set consists of 4 shock absorbers. Premium version, suitable for FG, Carson / Smartech etc. Fully assembled and filled. Special features:
16 mm inner diameter for higher oil volume
Volume equalisation Housing and screw connections made entirely of aluminium Hard anodised housing Precision piston made of Delrin, machined (no moulded part!) Aluminium piston rod base and aluminium spring plate Replaceable bearing bushes in the mounting eyes Pre-filled with 1000 silicone oil. For the following models: FG 2WD: Marder, Off-Road Buggy, Beetle, Monster Beetle Carson 2WD: Comanche, Attack Evo, CRT, CPT, Smartech monster truck Set contents:
Two long and two short dampers.We recommend our progressive off-road tuning shock absorber springs from the "Dirt-Spring M" series for the shock absorbers. The original springs can also be used on FG models! Silicone oil recommendation:
The GPM-Spezial Cross shock absorbers are filled with silicone oil viscosity 1000. This viscosity provides very good damping properties at normal outside temperatures. If softer damping is required, oil with a viscosity of 500 or 600 is recommended; for harder damping, 1500 or higher. One 50 ml bottle is sufficient for five long or six short dampers.
Set besteht aus 4 Dämpfer.Premiumausführung, passend für FG EVO 2020 Modelle.Fertig montiert und befüllt.Besondere Merkmale:16 mm Innendurchmesser für höheres ÖlvolumenVolumenausgleichGehäuse und Verschraubungen komplett aus Aluminiumharteloxiertes GehäusePräzisionskolben aus Delrin, zerspanend gefertigt (kein Spritzteil!)Alu-Kolbenstangenfuß und Alu-Federtelleraustauschbare Lagerbuchsen in den Befestigungsaugenfertig befüllt mit 1500/2000er Siliconöl.Für folgende Modelle:y1137/09 für FG-Evo 2020 Modelle: ab 2015Setinhalt:Vier kurze Dämpfer mit geänderten (gekürzt) Dämpferfüßen und Federteller, sowie Befüllung Front 2000er Heck 1500er Siliconöl.Bei Dämpfer Version brauchen sie die Feder y0452/02. Silikonöl-Empfehlung:Die GPM-Spezial Stoßdämpfer sind mit Silikonöl Viskosität 1500 und 2000er befüllt. Diese Viskosität ergibt sehr gute Dämpfungseigenschaften bei normalen Außentemperaturen.Wird eine weichere Dämpfung angestrebt, so empfiehlt sich Öl in den Viskositäten 1000 oder 1500; für eine härtere Dämpfung entsprechend 2500 oder höher.Eine 50 ml Flasche y0038 reicht für fünf lange oder sechs kurze Dämpfer.
y0882 Version:
y0882/02 Aluminium version+ 10EUR
Aluminum or steel balljoints for replacement of the stock plastic units on the a-arms of all FG cars except Formula 1. Alloy:A = 5 mmB = M8C = 8 mmD = 17,5 mmE = 39 mmSteel:A = 5 mmB = M8C = 8 mmD = 16 mmE = 37,5 mmContent:8 x Aluminum or Steel balljoints, M8 r/h thread, 5mm bore diameter in the ball8 x low height nut, M8 r/h thread 16 x conical alloy spacer
Variants from €49.90*
The set includes:Item N°.Name:y1027HT Aluminum a-arm 2WD, front uppery1026HT Aluminum a-arm 2WD, front lower, one-piecey1209HT Aluminum front bulkhead A for Carson Comanche, Attack Evo, CRT 2WD + CPTy1210HT Aluminum front bulkhead B for Carson Comanche, Attack Evo, CRT 2WD + CPTy1036HT rose joints with conical spacersUnit prices: 269,00 EURPlease note: the hinge pins are not included, you will use the pins from the stock suspension!Fits on Carson 1/6 / 1:5(Attack, SuperAttack, GasBlaster and Tuareg) and Smartech UNO