y1137/02 GPM-Big Bore Premium shock absorber for FG Monster/Stadium Truck 2WD, set
federn_dirt_m Version:
y0323/01 - M11, yellow
Progressive tuning springs, will fit the standard red and the thick silver shocks on FG offroad cars. The rear springs will also fit Hurrax shocks. All springs have an internal diameter because of the manufacturing progress: 21 up to 21,5 mm. Available in several versions: For the front on FG 2WD buggies:y0322/01 - M1, 2,1 x 50 mm, yellowy0322/02 - M2, 2,2 x 50 mm, orangey0322/03 - M4, 2,4 x 50 mm, purpley0322/04 - M5, 2,5 x 50 mm, blueFor the rear on FG buggies, front and rear on FG monster cars and 4WD buggies:y0323/01 - M11, 2,1 x 90 mm, yellowy0323/02 - M12, 2,2 x 90 mm, orangey0323/03 - M13, 2,3 x 90 mm, redy0323/04 - M14, 2,4 x 90 mm, purpley0323/05 - M15, 2,5 x 90 mm, bluey0323/06 - M16, 2,6 x 90 mm, blackFor the front on FG buggies:y0324/01 - M01, 2,1 x 60 mm, yellowy0324/02 - M02, 2,2 x 60 mm, orangey0324/03 - M03, 2,3 x 60 mm, redy0324/04 - M04, 2,4 x 60 mm, purpley0324/05 - M05, 2,5 x 60 mm, bluey0323/06 - M16, 2,6 x 90 mm, blackContents:2 pieces
y0038 Viscosity:
y0038/1000 - Viscosity: 1000+ 2.5EUR
Genuine silicone shock absorber oil for the optimal shock absorber set-up. Content: 50 ml Please note: Factory filling of FG/Losi/Smartech and many other 1/5 and 1/6 scale shocks is done with genuine silicone shock absorber oil. To ensure seal tightness and consistency you should only use genuine silicone shock absorber oil for refilling as well.Most every rc-car shock absorber uses silicone oil of different viscosities. The smaller the number, the lower the viscosity of the silicone oil and the softer the damping. As a rule of thumb: Viscosity 100 = similar to water Viscosity 1.000 = similar to cooking oil Viscosity 5.000 = similar to shampoo Viscosity 10.000 = similar to honey As a reference: The red FG Marder / Off-Road Buggy series shock absorbers are factory filled with 2.000 viscosity oil, the shocks on monster cars with dual shock set-ups (total of 8 shocks) are filled with 1.000 viscosity oil, and the shocks on FG onroad cars come filled with 4.000 viscosity oil. The original filling of the Losi 5ive-T is 350cc silicone oil.FG Silicone oil with 50 ml:FG Item N° 6510/010 = Viscosity: 100FG Item N° 6510/025 = Viscosity: 250FG Item N° 6510/035 = Viscosity: 350FG Item N° 6510/050 = Viscosity: 500FG Item N° 6510/075 = Viscosity: 750FG Item N° 6510/100 = Viscosity: 1000FG Item N° 6510/150 = Viscosity: 1500FG Item N° 6510/200 = Viscosity: 2000FG Item N° 6510/300 = Viscosity: 3000FG Item N° 6510/400 = Viscosity: 4000FG Item N° 6510/500 = Viscosity: 5000FG Item N° 6510/600 = Viscosity: 6000FG Item N° 6510/700 = Viscosity: 7000FG Item N° 6510/800 = Viscosity: 8000FG Item N° 6510/900 = Viscosity: 9000FG Item N° 6511 = Viscosity: 10000Viscosity of silicone oil at various temperatures.
Content: 50 Milliliter (€229.00* / 1000 Milliliter)
Variants from €8.95*
Product information "y1137/02 GPM-Big Bore Premium shock absorber for FG Monster/Stadium Truck 2WD, set"
Product information "y1137/02 GPM-Big Bore Premium shock absorbers
for FG Monster/Stadium Truck 2WD, set"
Set consists of 4 shock absorbers.
Premium version, suitable for FG, Carson / Smartech etc.
Fully assembled and filled.
Special features:
16 mm inner diameter for higher oil volume
Volume
equalisation
Housing and screw connections made entirely of aluminium
Hard anodised housing
Precision piston made of Delrin, machined (no moulded part!)
Aluminium piston rod base and aluminium spring plate
Replaceable bearing bushes in the mounting eyes
Pre-filled with 1000 silicone oil.
For the following models:
FG 2WD:
Monster Truck, Monster Jeep, Monster Hummer, Monster Beetle Pro, Stadium Truck, Stadium Jeep, Stadium Hummer
Set contents:
Four long shock absorbers
We recommend our progressive off-road tuning shock absorber springs from the "Dirt-Spring M" series, part number y0321, for the shock absorbers.
The original springs can also be used on FG models!
Silicone oil recommendation:
The GPM-Spezial Cross shock absorbers are filled with silicone oil viscosity 1000.
This viscosity provides very good damping properties at normal outside temperatures.
If softer damping is required, oil with a viscosity of 500 or 600 is recommended;
for harder damping, 1500 or higher is recommended.
One 50 ml bottle of y0038 is sufficient for five long or six short dampers.
Login
Similar products
Set consists of 4 dampers. Premium version, suitable for FG, Carson / Smartech etc.
Fully assembled and filled. Special features: 16 mm inner diameter for higher oil volume Volume equalisation Housing and screw connections made entirely of aluminium Hard anodised housing Precision piston made of Delrin, machined (no moulded part!) Aluminium piston rod base and aluminium spring plate Replaceable bearing bushes in the mounting eyes Pre-filled with 1000 silicone oil. For the following models: FG 4WD:
Monster Truck, Monster Jeep, Monster Hummer, Stadium Truck, Stadium Jeep, Stadium Hummer, Off-Road Beetle Set contents:
Four long dampers with 5 mm mount in the upper damper caps. Damper feet one pair short, one pair long (4WD MT version). We recommend our progressive off-road tuning shock absorber springs from the "Dirt-Spring M" series, part number y0321, for the shock absorbers. The original springs can also be used on FG models! Silicone oil recommendation: The GPM-Spezial Cross shock absorbers are filled with silicone oil viscosity 1000. This viscosity provides very good damping properties at normal outside temperatures. If softer damping is required, oil with a viscosity of 500 or 600 is recommended; for harder damping, 1500 or higher is recommended. One 50 ml bottle of y0038 is sufficient for five long or six short dampers.
Fully assembled and factory filled with 1.000 viscosity silicone oil. Including springs which can be adjusted via a threaded collar. The excellent quality GPM shocks fit all cars of the HPI Baja 5 series, Carson Wild GP Attack and feature an extremely massive 7 mm rod. The GPM shocks cases and rod ends are completely made of aluminum and equipped with replaceable bushings at the upper and lower mounting points.The external volume control is more efficient than built-in versions with membrane or foam element. Compared with the technically similar solution of a floating balance piston inside of the shock absorber body there is the advantage that no length of the shock absorber is needed for the volume compensation. Furthermore the additional housing surface of the equalizing chamber helps in cooling the oil. Dimensions (front):distance between mounting holes (extended): 187 mm travel: 62 mm li> Outer diameter: 28 mm Mounting specifications: top and bottom 12 mm wide ball mount with 4 mm bore The GPM shocks are filled with 1.000 viscosity silicone oil. For a firmer setting 1.500 or higher viscosity silicone oil is recommended. If a softer setup is required, 900 or lower viscosity oil should be used.
Set consists of 4 dampers. Premium version, suitable for FG, Carson / Smartech etc. Fully assembled and filled. Special features: 16 mm inner diameter for higher oil volume
Volume equalisation Housing and screw connections made entirely of aluminium Hard anodised housing Precision piston made of Delrin, machined (no moulded part!) Aluminium piston rod base and aluminium spring plate Replaceable bearing bushes in the mounting eyes Pre-filled with 1000 silicone oil. For the following models: FG 4WD:
Marder, Off-Road Buggy Set contents: Four long shock absorbers, one pair of shock absorbers has the upper mount with 5 mm bore. We recommend our progressive off-road tuning shock absorber springs from the "Dirt-Spring M" series, part number y0321, for the shock absorbers. The original springs can also be used on FG models! Silicone oil recommendation: The GPM-Spezial Cross shock absorbers are filled with silicone oil viscosity 1000. This viscosity provides very good damping properties at normal outside temperatures. If softer damping is required, oil with a viscosity of 500 or 600 is recommended; for harder damping, 1500 or higher is recommended. One 50 ml bottle of y0038 is sufficient for five long or six short dampers.
Nut for Arrma shock absorbers and AKX187 front and rear.1 pieces
Item N° y0574/02GPM-Spezial Cross shocks singel, 1 pce.GPM-Spezial Cross shocks, premium full metal version, assembled and filled.Special features:- 16 mm shock bore for increased capacity- volume compensation- shock body and caps machined from billet aluminum- hard anodized shock body- machined precision delrin pistons (not injection molded!)- aluminum shaft end and spring retainer- shock caps with replaceable bushings-factory filled with silicone oilWe recommend our progressive offroad tuning springs "". FG cars can use their stock springs as well.Dimensions: - Overall length, extended: long 155 mm- Mounting distance, extended: long 144,5 mm- Travel: long 43,5 mm- Inner diameter of spring: 21 mm - Shock body diameter: 20 mm - Eye bore: 4.5 mm - Eye thickness: top 6 mm, bottom 5 mm - Shaft diameter: 4 mm - Shaft thread: M4 Shock oil recommendations:The GPM-Spezial Cross shocks are factory filled with 500 viscosity silicone oil. This gives a very good shock performance at normal ambient temperatures.When a softer shock is required, you can go for 400 or even 300 viscosity oil; 600 and up if you prefer more damping.One 50 ml bottle fills 5 long or 6 short shocks.
Original GPM Ersatz-/Tuningteil.Shock absorber for Super Baja Rey (incl. 2.0) with external volume compensation in all-metal design, spring perches and lower ball joints are also made of aluminum. Oversized 7 mm diameter piston rod.Mounting hole spacing: extended approx. 134 mm, compressed approx. 103 mm. Dimensions springs: 9 coils 2,5 mm wire thickness approx. 88 mm free length 24 mm inner diameter Contents:2 pieces
Genuine GPM spare/option part. The GPM piggyback reservoir shocks increase the oil volume and the separate vent screw makes filling the shocks easier. Shocks come in pairs including all-metal lower ball joints, spring perches and two pairs of springs with 2.6 mm and 2.8 mm wire diameter. Reinforced shock shafts with 6 mm diameter.Fits Arrma Kraton 8S front suspension application only!Length extended/compressed (center-to-center of mounting points): approx. 180 mm/125 mm.Contents:1 set
Customers also viewed
Set consists of 4 dampers. Premium version, suitable for FG, Carson / Smartech etc. Fully assembled and filled. Special features: 16 mm inner diameter for higher oil volume
Volume equalisation Housing and screw connections made entirely of aluminium Hard anodised housing Precision piston made of Delrin, machined (no moulded part!) Aluminium piston rod base and aluminium spring plate Replaceable bearing bushes in the mounting eyes Pre-filled with 1000 silicone oil. For the following models: FG 4WD:
Marder, Off-Road Buggy Set contents: Four long shock absorbers, one pair of shock absorbers has the upper mount with 5 mm bore. We recommend our progressive off-road tuning shock absorber springs from the "Dirt-Spring M" series, part number y0321, for the shock absorbers. The original springs can also be used on FG models! Silicone oil recommendation: The GPM-Spezial Cross shock absorbers are filled with silicone oil viscosity 1000. This viscosity provides very good damping properties at normal outside temperatures. If softer damping is required, oil with a viscosity of 500 or 600 is recommended; for harder damping, 1500 or higher is recommended. One 50 ml bottle of y0038 is sufficient for five long or six short dampers.
Shock absorber conversion kit for all 1:5 and 1:6 Ecoline models. Bulk oil-pressure shock absorber Ø20mm, experienced for years. The set contains 2 shock absorber with spring plate and spacer rings.
Set consists of 4 dampers. Premium version, suitable for FG, Carson / Smartech etc.
Fully assembled and filled. Special features: 16 mm inner diameter for higher oil volume Volume equalisation Housing and screw connections made entirely of aluminium Hard anodised housing Precision piston made of Delrin, machined (no moulded part!) Aluminium piston rod base and aluminium spring plate Replaceable bearing bushes in the mounting eyes Pre-filled with 1000 silicone oil. For the following models: FG 4WD:
Monster Truck, Monster Jeep, Monster Hummer, Stadium Truck, Stadium Jeep, Stadium Hummer, Off-Road Beetle Set contents:
Four long dampers with 5 mm mount in the upper damper caps. Damper feet one pair short, one pair long (4WD MT version). We recommend our progressive off-road tuning shock absorber springs from the "Dirt-Spring M" series, part number y0321, for the shock absorbers. The original springs can also be used on FG models! Silicone oil recommendation: The GPM-Spezial Cross shock absorbers are filled with silicone oil viscosity 1000. This viscosity provides very good damping properties at normal outside temperatures. If softer damping is required, oil with a viscosity of 500 or 600 is recommended; for harder damping, 1500 or higher is recommended. One 50 ml bottle of y0038 is sufficient for five long or six short dampers.
%
Genuine Top Tuning spare/option part. Indispensable for optimal suspension tuning!Vacuum container for removal of bubbles from shock fluid when filling shocks.A vacuum pump is built into the lid. The tray has four holes each to accept 1/10, 1/8, 1/6 and 1/5 scale shocks.Suitable for shock absorbers from Losi, Mecatech, BWS, Arrma, Traxxas, FG, Carson, HPI and many more, as long as they have a suitable diameter. All shocks from 15 to 32 mm outer diameter can be used in the Bubble Ex to be "de-bubbled". Tray bore sizes: No. 1 = 32 mm diameter No. 2 = 21 mm diameter No. 3 = 17.5 mm diameter No. 4 = 15 mm diameter The maximum length of the shock absorber up to the upper edge of the body is about 150 mm, whereby longer shock absorbers can also be partially compressed for insertion. (e.g Losi 5ive-T and many more)Operation:Unlock the vacuum pump by turning it slightly to the left, the pump handle then extends a little. The small plug with handle is used to close and ventilate the container. To build up the vacuum, the plug must be in the down position.The small membrane on the opposite side serves as an indicator for whether a vacuum is present. Only when this is curved outwards the lid of the container can be opened again without any effort. Content: Can with integrated vacuum pump Shock tray
With 32 cm³ and 30% more power than the Zenoah G290.Significantly more torque and higher stamina due to larger sized bearings all around, with Racing Carburetor Walbro WT1107.The motor is supplied with WT-1107 carburetor and spark plug.SpecificationType: Two stroke gasoline engineDisplacement: 31,8 cm³Bore: 38 mmStroke: 28 mmWeight: 2,3 KgOverall Dimension:Length: 167 mmWidth: 215 mmHeight: 196 mmMaximum Output: 4,6 PSMaximum Torque: 2,00 N-mRotation Direction: CounterclockwiseCarburetor: Walbro WT-1107Spark plug: CMR7HStarting: Recoil starterFor all HPI Baja 5 cars the G320RCer clutch housing has to be shortened at the mounting base, for Losi 5ive- T and Desert Buggy XL cars the clutch housings overall length must be shortened to CY size.With the new "K & N" version of the Losi DBXL there is another detail, which need to be considered.From the very beginning the hole pattern for the engine installation in the DBXL chassis plate was no precise match to the hole pattern of the engine, even when delivered in stock form with standard engine. Now with the "K&N" version the engine mount has been changed to eliminate this discrepancy. However, all aluminum engine mounts available on the market share their dimensions with the previous plastic engine mount. For the installation of a G320 Zenoah in a "K&N" -DBXL two possible combinations exist in order to obtain the correct hole pattern:When using the standard (new) plastic engine mount a shortened clutch housing is required as in a 5ive-TWhen using an aluminum engine mount a stock length clutch housing is requiredSeparately, it is recommended to enlarge the cutout in the body panel in front of the K & N air filter for about 2 - 3 mm to ensure that the panel cannot chafe on the air filter.When installing the air filter you must pay attention to the length of the screws.For use on Losi and HPI we recommend M5x45 screws (like H94763); you can also cut existing screws to length, of course.When ordering with a modified clutch housing we will include these screws!In our shop you can select from Zenoah G320RC engines already modified to fit your HPI or Losi car.The installation of the Zenoah G320RC in other cars (like FG or Smartech buggies / monsters a.s.o.) is not even remotely straightforward, since the layshaft pinion (the small pinion in front of the big differential spur gear) is in the way for the larger Zenoah G320RC crankcase.Compatibility Zenoah / Losi 5ive-T:Please note that for installation in a Losi 5ive the fan cover must be swapped for a Losi or CY cover #5341 in order to fit the chassis" bolt pattern.If you want to install a Zenoah engine into the Losi 5ive, you usually have to use a fan cover from the CY engine.However, there is a workaround to maintain Zenoah fan cover.The adjustment is done via the pinion specific mounting plates for the engine. The change always affects only the rear, outer (carburetor side) plate under the fan cover. This is rotated by 180°; so that the embossed number on this plate faces the exhaust side of the engine!18T pinion: use 20T plate, rotated 180°19T pinion: use 19T plate, rotated 180°20T pinion: use 18T plate, rotated 180°On the plus side you gain the opportunity to easily mount a Zenoah engine keeping the original fan cover. On the other hand there will be the disadvantage of the necessity to combine two different sets of engine mounting plates when installing any pinion other than the stock 19T version. Therefore we do not recommend this workaround for everyday use. Nevertheless it works perfectly should ever the need arise. Attention! We recommend to run exclusively fully synthetic 2-stroke engine oil, like y0813 Motul 800 racing oil.
Genuine FG spare/option part. Stock spur gear for all FG monster cars.Suitable for spur gear carriers: 6050 (plastic) 6439 (aluminum)Dimensions:Diameter: 75 mmWidth: 15.5 mmTooth width: 12 mmModule: m=1,5 Contents:1 piece
