BJ186F GPM Shocks for HPI-Baja 5, Carson Wild GP Attack cars front
€129.90
Available
Product information "BJ186F GPM Shocks for HPI-Baja 5, Carson Wild GP Attack cars front"
The GPM shocks cases and rod ends are completely made of aluminum and equipped with replaceable bushings at the upper and lower mounting points.
The external volume control is more efficient than built-in versions with membrane or foam element. Compared with the technically similar solution of a floating balance piston inside of the shock absorber body there is the advantage that no length of the shock absorber is needed for the volume compensation. Furthermore the additional housing surface of the equalizing chamber helps in cooling the oil.
Dimensions (front):
distance between mounting holes (extended): 187 mm travel: 62 mm li> Outer diameter: 28 mm Mounting specifications: top and bottom 12 mm wide ball mount with 4 mm bore
The GPM shocks are filled with 1.000 viscosity silicone oil. For a firmer setting 1.500 or higher viscosity silicone oil is recommended. If a softer setup is required, 900 or lower viscosity oil should be used.
1145-1153 Canton Road
Room B, 4/F, Famous Horse Centre
00000 Mong Kok, Kowloon, Hong Kong
Hong Kong
Login
Accessories / Spare parts
Genuine silicone shock absorber oil for the optimal shock absorber set-up. Content: 50 ml Please note: Factory filling of FG/Losi/Smartech and many other 1/5 and 1/6 scale shocks is done with genuine silicone shock absorber oil. To ensure seal tightness and consistency you should only use genuine silicone shock absorber oil for refilling as well.Most every rc-car shock absorber uses silicone oil of different viscosities. The smaller the number, the lower the viscosity of the silicone oil and the softer the damping. As a rule of thumb: Viscosity 100 = similar to water Viscosity 1.000 = similar to cooking oil Viscosity 5.000 = similar to shampoo Viscosity 10.000 = similar to honey As a reference: The red FG Marder / Off-Road Buggy series shock absorbers are factory filled with 2.000 viscosity oil, the shocks on monster cars with dual shock set-ups (total of 8 shocks) are filled with 1.000 viscosity oil, and the shocks on FG onroad cars come filled with 4.000 viscosity oil. The original filling of the Losi 5ive-T is 350cc silicone oil.FG Silicone oil with 50 ml:FG Item N° 6510/010 = Viscosity: 100FG Item N° 6510/025 = Viscosity: 250FG Item N° 6510/035 = Viscosity: 350FG Item N° 6510/050 = Viscosity: 500FG Item N° 6510/075 = Viscosity: 750FG Item N° 6510/100 = Viscosity: 1000FG Item N° 6510/150 = Viscosity: 1500FG Item N° 6510/200 = Viscosity: 2000FG Item N° 6510/300 = Viscosity: 3000FG Item N° 6510/400 = Viscosity: 4000FG Item N° 6510/500 = Viscosity: 5000FG Item N° 6510/600 = Viscosity: 6000FG Item N° 6510/700 = Viscosity: 7000FG Item N° 6510/800 = Viscosity: 8000FG Item N° 6510/900 = Viscosity: 9000FG Item N° 6511 = Viscosity: 10000Viscosity of silicone oil at various temperatures.
Content: 50 Milliliter (€179.00 / 1000 Milliliter)
Genuine silicone shock absorber oil for the optimal shock absorber set-up. Content: 100 ml Please note: Factory filling of FG/Losi/Smartech and many other 1/5 and 1/6 scale shocks is done with genuine silicone shock absorber oil. To ensure seal tightness and consistency you should only use genuine silicone shock absorber oil for refilling as well.Most every rc-car shock absorber uses silicone oil of different viscosities. The smaller the number, the lower the viscosity of the silicone oil and the softer the damping. As a rule of thumb: Viscosity 100 = similar to water Viscosity 1.000 = similar to cooking oil Viscosity 5.000 = similar to shampoo Viscosity 10.000 = similar to honey As a reference: The red FG Marder / Off-Road Buggy series shock absorbers are factory filled with 2.000 viscosity oil, the shocks on monster cars with dual shock set-ups (total of 8 shocks) are filled with 1.000 viscosity oil, and the shocks on FG onroad cars come filled with 4.000 viscosity oil. The original filling of the Losi 5ive-T is 350cc silicone oil.FG Silicone oil with 100 ml:FG Item N° 66295/010 = Viscosity: 100 FG Item N° 66295/025 = Viscosity: 250FG Item N° 66295/035 = Viscosity: 350FG Item N° 66295/050 = Viscosity: 500FG Item N° 66295/075 = Viscosity: 750FG Item N° 66295/100 = Viscosity: 1000FG Item N° 66295/150 = Viscosity: 1500FG Item N° 66295/200 = Viscosity: 2000FG Item N° 66295/300 = Viscosity: 3000FG Item N° 66295/400 = Viscosity: 4000FG Item N° 66295/500 = Viscosity: 5000FG Item N° 66295/600 = Viscosity: 6000FG Item N° 66295/700 = Viscosity: 7000FG Item N° 66295/800 = Viscosity: 8000FG Item N° 66295/900 = Viscosity: 9000FG Item N° 66296 = Viscosity: 10000Viscosity of silicone oil at various temperatures.
Content: 100 Milliliter (€154.00 / 1000 Milliliter)
Customers also viewed
Original GPM Ersatz-/Tuningteil.Shock absorber for Super Baja Rey (incl. 2.0) with external volume compensation in all-metal design, spring perches and lower ball joints are also made of aluminum. Oversized 7 mm diameter piston rod.Mounting hole spacing: extended approx. 134 mm, compressed approx. 103 mm. Dimensions springs: 9 coils 2,5 mm wire thickness approx. 88 mm free length 24 mm inner diameter Contents:2 pieces
Genuine HPI spare/option part.Color: Gunmetal.Range of spring: 127 - 187 mm.Contents:2 pieces
Item N° y0574/02GPM-Spezial Cross shocks singel, 1 pce.GPM-Spezial Cross shocks, premium full metal version, assembled and filled.Special features:- 16 mm shock bore for increased capacity- volume compensation- shock body and caps machined from billet aluminum- hard anodized shock body- machined precision delrin pistons (not injection molded!)- aluminum shaft end and spring retainer- shock caps with replaceable bushings-factory filled with silicone oilWe recommend our progressive offroad tuning springs "". FG cars can use their stock springs as well.Dimensions: - Overall length, extended: long 155 mm- Mounting distance, extended: long 144,5 mm- Travel: long 43,5 mm- Inner diameter of spring: 21 mm - Shock body diameter: 20 mm - Eye bore: 4.5 mm - Eye thickness: top 6 mm, bottom 5 mm - Shaft diameter: 4 mm - Shaft thread: M4 Shock oil recommendations:The GPM-Spezial Cross shocks are factory filled with 500 viscosity silicone oil. This gives a very good shock performance at normal ambient temperatures.When a softer shock is required, you can go for 400 or even 300 viscosity oil; 600 and up if you prefer more damping.One 50 ml bottle fills 5 long or 6 short shocks.
Inklusive: Spektrum™ Firma® 160 Amp Brushless SMART ESCDer Regler ist wasserdicht, vollständig programmierbar und mit einem Hochstrom-IC5-Stecker versehen. Der Regler funktioniert mit den meisten brushless Motoren und ist mit LiPo und NiMH Akkus kompatibel. Die SMART-Technologie liefert Informationen wie Batteriespannung, Drehzahl, RX-Pack-Spannung und Geschwindigkeit direkt vom ESC, wenn das ESC mit der Spektrum Dashboard-App verwendet wird. 80+ KMH Spektrum Firma 4-Pol 780Kv Brushless MotorDer brushless Regler und Motor bieten unglaubliche Leistung mit einem 8S LiPo (nicht im Lieferumfang enthalten), und ermöglichen Geschwindigkeiten von über 80 KMH.- 2x 6200 mAh LiPo battery 4S, 14,8V 60C To complete the HPI Baja 5B you still need the RTR equipment (radio system, servo) receiver battery. Available in our selection! BUILD YOUR OWN ORIGINAL,AUTHENTIC HPI BAJA 5BHPI large scale fans, we have heard you! The one and only original HPI Baja 5B is BACK and ready for you to build from the ground up! The HPI SBK collection of Self Build Kits grows with the addition of not just one, but TWO 1/5th scale HPI kits! Fans of large scale off-road RC will be super excited to build their own gas-powered 1/5th scale Buggy with the HPI Baja 5B Self Build Kit!When the HPI Baja 5B buggy was first introduced, large scale RC was very expensive and quite difficult for the average RC hobbyist to experience. Using highly durable parts and innovative design features, HPI brought large scale off-road to new enthusiasts and ushered in a new, BIGGER era of RC!Now, YOU can build and own the legend! Experience the thrill and excitement of building a car which ends up being over 80cm (nearly 32 inches) long and weighing nearly 10kg (over 21 lb)! Just install your own engine and electronics as you build the HPI Baja 5B and you'll be ready for any adventure that comes your way!With extra-tough drivetrain parts like the viscous torque differential, super-durable composite spur gear with internal damping and all-metal drivetrain, the HPI Baja 5B is ready for your 23-32cc 2-stroke engine so you can experience the joy of gas-powered RC and up to 30-minute runtimes!The HPI Baja 5B is also equipped with extra-big and super-tough suspension parts, featuring awesome HPI durability! With its expertly designed molded composite suspension plus extra-long adjustable HD shocks, and massive high impact nylon 3-piece beadlock wheels, the Baja 5B is ready for full-speed racing on any off-road circuit!The 4mm thick 6061 aluminum monocoque chassis gives the HPI Baja 5B the classic desert racing buggy look. Precisely bent into shape for maximum strength, the chassis provides the mounting points for the engine and suspension, forming the backbone of the car. Precise steering is provided by a dual-bellcrank rack and cam-type servo saver. Aluminum parts are anodized in cool gunmetal and the classic Baja desert racer clear polycarbonate body is included in the SBK kit, ready for your custom racing scheme!The Baja 5B SBK is a great addition to your HPI collection, as well as a fabulous introduction to large scale buggies!RACING CHASSIS DESIGN & LAYOUTThe narrow channel chassis made from rigid 4mm 6061 aircraft aluminum and gives the HPI Baja 5B a classic desert racing buggy look and extreme stiffness and durability. The U-shaped chassis is protected at the rear with a thick plastic skid plate for extra protection to the motor and drivetrain.The tube roll cage is made of high impact nylon and topped with a real aluminum roof to carry on the classic looks. The roll cage is fully functional and protects the motor and internals from crash damage. The roll cage, radio box, body panels, wing, undertray and gear case are all mounted with fast access clips for easy maintenance. To finish you need: Remote control with servos and receiver battery Charger Two cans of Lexan paint Features Summary Unassembled 1/5th scale electric-powered Off-Road Buggy Ready for your 6S or 8S LiPo electronics Streamlined HPI Baja 5B Flux body design Adjustable motor mount Adjustable HD shock absorbers Monocoque chassis Low CG for superior handling Long travel suspension Viscous torque oil-filled gear differential All-terrain tires Beadlock wheels with metal insert hubs Aluminum rear shock tower Hard plastic skid plates Adjustable rear wing Quick access to all critical maintenance points Dual bellcrank steering Cam type servo saver Hex socket hardware Gunmetal anodizing Full set of rubber-sealed ball bearings Enclosed receiver box Chassis Specifications Overall Length 817mm Height: 255mm Width: Front - 460mm; Rear - 480mm Tire Track (to center of tires): Front - 395mm; Rear - 400mm Wheelbase: 570mm Ride Height: 76mm Suspension Travel: Front - 95mm; Rear - 100mm Weight: 9.6kg (21.3lb) Adjustable Camber: front - shims; rear - screw Front caster: adjustable with shim 22 / 25.5* / 29 degrees (* stock) Toe-in: Front adjustable with tie rod; Rear adjustable with inserts 0-4 degrees (3 degrees stock set-up) Aircraft aluminum 6061 T6 monocoque chassis Double wishbone suspension with adjustable roll center F/R Drive system: HD metal gears with sealed gear box (8.382:1 gear ratio) Differential: viscous torque control with 4 pinion gears; sealed diff case with silicone oil Shock absorber: HD Aluminum coilover shock absorber with fully adjustable preload collar Wheel type: 3-piece beadlock design, high impact nylon material with inset heavy-duty metal hex hub