y0571 alloy diff incl. reinforced diff. tube and bevel diff. gearwheel for Carson/Smartech 2WD
€189.90
Currently unavailable
Product information "y0571 alloy diff incl. reinforced diff. tube and bevel diff. gearwheel for Carson/Smartech 2WD"
Fully assembled Alloy differential including reinforced differential-tube and "inner-workings", such as original planetary gears, differential bevel gears, bevel differential wheel axles, sealed bearings, differential shafts with needle bearings (high-speed needle bearing).
You only have to insert your full-floating axle (halfshafts). Since the FG and Carson are having different internal teeths by the planetary gears, different versions for FG and Carson/Smartech 2WD are available.
Even on heavy off-road use and especially on jumps there are often problems with the original plastic differential. Noticeable is also the relatively thin differential-tube of the serial-equipping.
Therefore our special offer for the complete Alloy differential including extra reinforced differential-tube.
Set includet:
- 8486 Alloy differential housing
- 6068 Bevel differential gear axle
- 6066/01 Differential bevel gear A, spline drive
- 6067 Differential bevel gear B
- FG ball bearings, sealed, y19610-rs
- Reinforced differential tube for FG buggy differential, y0902
- 8498/01 Needle bearing for alloy differential
Contents:
- 1 set
Nauenweg 55
47805 Krefeld
Germany
Login
Accessories / Spare parts
Genuine HT spare/option part. Bearing puller especially for the disassembly of ball bearings from differentials.The arms are reliably fixed at the set distance by an adjustment cone, which makes the use of this puller very easy. The thin hooks allow the use even with little space between ball bearing and differential.Dimensions: Min. opening width: 17 mm Max. opening width: 50 mm Max. height from the Clutch: 25 mmContents:1 piece
We essentially simplyfied the inserting of the differential bevel gear wheels with the mounting tool. Through the exact positioning of the bevel gear wheels it is guaranteed that the differential bevel wheel axle and the differential driving axle are in true alignment from the beginning.
Freaking expensive, but it is damned fine.ASONIC HQ 72-102 is a synthetic high-temperature lubricating grease, for use in limited slip differentials. Due to the careful selection of product components and the clean manufacturing environment, ASONIC HQ 72-102 is a rolling bearing grease with a particularly low noise level.Benefits for your application:High-temperature lubricating grease for rolling bearingsHigh purityLow noiseGood water resistanceContent:1 piece, tube with 30g
Content: 30 Gramm (€830.00 / 1000 Gramm)
Customers also bought
Race ported top end set for the original 5ive-T 26 cm³ engine.The SPEED TEC EXPERT genuine Zenoah G260 race ported top end set is optimized for performance with sophisticated craftsmanship and when accurately installed - guarantees, besides greatly increased performance, excellent workmanship and stamina. SPEED TEC EXPERT version modifications: Cylinder: Adjustment of compressionEnlarged portsFuel management milledModified exhaust and intake Piston: Weight reducedSkirt shortenedOil ringsPiston above and below piston ring tapered and piston dome ground The set includes the following items: Performance-optimized cylinder and piston, piston ring, piston pin, piston pin circlips and cylinder gasket.To achieve the optimum performance gain of a SPEED TEC EXPERT top end set, we recommend the use of a tuned pipe.
Genuine Mecatech spare/option part for the FW01.Content:2 pieces
Genuine Mecatech spare/option part for the FW01.Content:2 pieces
Customers also viewed
Genuine HT spare/option part. Fully assembled Alloy differential including reinforced differential-tube and "inner-workings", such as original planetary gears, differential bevel gears, bevel differential wheel axles, sealed bearings, differential shafts with needle bearings (high-speed needle bearing).You only have to insert your full-floating axle (halfshafts). Since the FG and Carson are having different internal teeths by the planetary gears, different versions for FG and Carson/Smartech 2WD are available.Even on heavy off-road use and especially on jumps there are often problems with the original plastic differential. Noticeable is also the relatively thin differential-tube of the serial-equipping. Therefore our special offer for the complete Alloy differential including extra reinforced differential-tube.Set includet:8486 Alloy differential housing6068 Bevel differential gear axle6066/01 Differential bevel gear A, spline drive 6067 Differential bevel gear BFG ball bearings, sealed, y19610-rsReinforced differential tube for FG buggy differential, y09028498/01 Needle bearing for alloy differentialContents:1 set
Suitable for all 1:5 models, Trucks, Formula 1 and Leopard.Please note: The differential comes unassembled, we recommend assembly tool #8505 for bevel gear installation.
FG introduces the first full-blooded fourwheel-driven Touring and Sports cars within the Sportsline series. With a wheelbase of 510mm and 530mm these 4WD chassis fit almost all FG bodyshells. Equipped with a technical high-grade chassis, a powerful 26 cm³ engine with tuning pipe, snap-closure fuel tank, differential gear, front disk brake and a lot more. This chassis offers maximal traction as well as easy handling, simply pure driving fun. You can select the car with complete RTR-equipment from the options menu. RTR-equipment RTR = Ready to Run. The RTR version comes ready to use with the 2,4 GHz rc-system already installed. Transmitter: Reflex Wheel Pro III 2,4 GHzReceiver: Mini BECHigh power servo for throttle and brakeLargescale servo for steeringTx-battery, rx-battery For an additional charge you can also select the HT-EDITION above. A great tuning offer for your new FG Sportsline. The standard price for the individual parts is €200.30. These tuning parts not only look great, but they also make your model more reliable.HT-Edition?HT-Edition means: this version comes with a big set of spare / option parts included.Steel pinions - Non-standard sizesEach of two different ratios are supplied with.Modul: m=1,5Value: 62,60 EURAlloy engine mount smallCNC machined alloy engine mounts, direkt replacement for the stock plastic parts, heat and tweak resistant.Value: 54,90 EURDriveshaft bootsProtect ball drive as well as cardan drive against dirt.4 pairs / 8 piecesValue: 42,90 EURAlloy spur gear carrierUse for 39T - 44 teeth spur gears.Value: 39,90 EURTotal value: 200,30 EURTechnical description:The FG Sportsline class with its detailed bodyshells is not only a visual highlight. These models convince through their sophisticated chassis. With a double wishbone suspension offering adjusting possibilies for toe-in, wheel camber and caster as well as a robust four-wheel drive which gives the model neutral driving characteristics. We placed special importance on durability through using solid materials and on suitability also for beginners in this hobby. The FG Sportsline class is the reasonably priced but still top-quality entry into the RC car sports sector. Equipped with a strong 26 cm³ engine, tuning pipe, tank with snap closure, 2 differential gears, front disk brake and a lot more. However, highlight remains the approved FG four-wheel drive. Maximum traction as well as easy handling, grip in the curves - these are the advantages only offered by a four-wheel drive.- The body shell is unpaintedDimensions: Total length: 900 mmChassis length: 780 mm Width: 392 mm Height: 240 mm Wheelbase: 530 mm The RTR version of the car includes servos, transmitter, receiver, rechargeable batteries for transmitter / receiver.Touring cars in action!Painting tips:
Genuine FG spare/option part. Precise, solid and reliable, for use at competitions, not adjustable.Suitable for Off-Road Buggy 4WD RTR, Off-Road Beetle 4WD RTR and Monster/Stadium models 4WD RTR.Content:1 set
The set includes: rear platedifferential mountsupper a-armslower a-armsinstallation hardware. Please note: must use inge pins 6075 instead of 6073! y0991for all FG 1/5 scale Sportsline 2WD touring cars, GT models (except Formular 1 and 1/6 scale Race Truck) The set includes:Rear platedifferential mountsupper a-armslower a-armsriser platesinstallation hardware.Please note: must use inge pins 6075 instead of 6073! y1003for all 1/6 scale Smartech Uno, Carson Attack, Super Attack, Gas Blaster and 1/5 scale Smartech/Carson touring car C5 and R5 models. The set includes: rear platedifferential mountslower a-armsupper a-armsinstallation hardware. Please note: must use inge pins 6075, also you need two packets turnbuckle 40 mm 6100/04y1205For Smartech 2WD Monster-Truck, Pick up Truck, Monster-Beetle, Comanche, CRT. The set includes: rear plate differential mounts lower a-arms upper a-arms steel turnbuckles for upper a-arms installation hardware. Please note: the hinge pins are not included, you will use the pins from the stock suspension!
Genuine FG spare/option part. For all FG differentials except visco and self locking differentials.Only useable with spline drive differential shafts.Dimensions:Modul: m=1,516 TeethOuter diameter: 26 mmLength: 12.5 mmContents:2 pieces
Genuine HT spare/option part.Extra strong tube machined from 7075-T6 high grade aluminum with an outerdiameter of 49 mm. This tube is made to solve the problem of destroyed differential tubes in off-road cars, it is several times stronger than the stock version.Contents:1 piece