y0902 Reinforced differential tube for FG buggy differential

rc-car-online

€34.90*

Prices incl. VAT plus shipping costs

Available

Product number: diff_0003

EAN: 4058575010913

Product information "y0902 Reinforced differential tube for FG buggy differential"

Genuine HT spare/option part.

Extra strong tube machined from 7075-T6 high grade aluminum with an outerdiameter of 49 mm. This tube is made to solve the problem of destroyed differential tubes in off-road cars, it is several times stronger than the stock version.

Contents:

1 piece

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

Display reviews in current language only.

No reviews found. Share your insights with others.

Customers also bought

y0580 Mammoth Supergrip for 1/6 and 1/5 offroad cars glued

If you want a special combination of compounds please enter that information into the "note to us" form field at the end of the checkout process.Mammoth Supergrip for 1/6 and 1/5 offroad cars. Fits too for Formular 1 models!Parking lot / race tires for your offroad car.VersionWidthOuter diameterFront64 mm153 mmRear78 mm153 mmGlued on genuine FG rims (rear tires using extension rings), with foam rubber inserts included. Rim has 18 mm square drive with reinforcement ring.Please note: based on experience we recommend against using other manufacturers rims and extensions. Since the Mammoth tires provide very good grip the rim and the bonding must withstand high loads. Due to the high torque load on the bonding of tires on largescale cars, checking the bonding from time to time and re-glueing (y0067) if necessary is unavoidable.The Mammoth Supergrip is available in in the following compounds: Super softSoftMediumHardFront tirey0581y0582y0583y0584Rear tirey0591y0592y0593y0594General recommendation:The dirtier the track or the lower the ambient temperatures, the stickier (softer) the rear tires should be.Hint regarding the front tires: 2WD cars should use them one or two grades harder then the rears. 4WD cars usually like the same compound all around.Of course, the softer the tire the higher the wear rate; and this applies to Mammoth Supergrip onroad tires as well.The tires have a special onroad thread pattern but will still provide ideal traction after the pattern has been worn out. The white lettering on the tires has been applied for presentation purpose only. The tires will be delivered with black sidewall.Prices per unit: FrontRearMammoth Supergrip:Pair44,90 EUR49,90 EURTire inserts:Pair13,00 EUR13,00 EURFG rim:Pair14,90 EUR14,90 EURFG extension ring:Pair--.-- EUR14,90 EURMounting:Pair13,00 EUR13,00 EURTotal Price 85,80 EUR 105,70 EUR = 191,50 EUR SETTotal for 1 pair each front and rear: 169,90 EUR================================Also suitable for:With the following wheel adapter: y1183 Rim adapter

€119.90*

6065/05 FG Differential key

Genuine FG spare/option part. The differential key prevents a damage of the diff. cover through bigger stones. Suitable for all FG 1:6 Buggy and Monster models.Contents:1 piece

€4.90*

6512 FG Differential grease 50 ml

Genuine FG spare/option part.When adding this grease in the differential you achieve a blocking effect according to its sticky nature. Only for standard differentials, not for the adjustable differentials.Contents:1 piece / 50 ml

€11.90*

y0067 HT tire cement and activator

Accelerator-spray is the second component to cure superglue immediately.This set is also particularly suitable for the possible repair of loosened tire/rim gluing!Advantages:Tangible adhesion after a few secondsAromatic solvents and hexane freeSuitable for hobby, craft, industry and householdProcessing:Clean the surface thoroughly. Apply accelerator at room temperature on both surfaces to be bonded until a clear liquid film appears. Air out the applied accelerator, then apply the superglue as usual.Contents:Special tire cement ht 4000Spray can activator

Content: 170 Milliliter (€87.65* / 1000 Milliliter)

€14.90*

6065/01 FG Plastic diff. cover

Original FG Ersatz-/Tuningteil.Well-priced but still effective plastic diff. cover. Stones can damage metal covers and it is difficult to removethem. According to the flexible plastic material an impressing becomes hardly possible. If it still happens the cover can be easily removed through cutting with a knife or a scissors.Dimensions:Length: 43 mmDiameter: 45 mmFlange diameter: 65 mmInhalt:1 Stück

€6.90*

y1621 Differential cover set for FG / Carson 2WD off-road cars

This two-piece differential cover is easy to attach with the existing screws and provides optimal protection against stones and dirt. Suitable for all 2WD FG Offroad models, not suitable for the 2WD models that are based on 4WD e.g. Fun Cross, Leopard, Truggy and all WB535 models.Also suitable for Carson 2WD models e.g. Uno, Attack, Gas Blaster and more.Contents:1 set

€19.90*

Similar products

y0744 Differential Silicone oil / grease, viscosity 15.000 untill 2.000.000, 50 ml

y0744 Viscosity: y0744/03 - 50.000+ 2.9EUR

For changing the locking effect of large scale car differentials.Top quality in 50 ml plastic wide-neck bottles.Silicone oil / grease with a viscosity to choose:15.00030.00050.000100.000300.0001.000.0002.000.000Viscosity of silicone oil at various temperatures.

Content: 50 Milliliter (€316.00* / 1000 Milliliter)

Variants from €12.90*

€15.80* €17.80* (11.24% saved)

y0809 Klüber high performance grease for differentials

Freaking expensive, but it is damned fine.ASONIC HQ 72-102 is a synthetic high-temperature lubricating grease, for use in limited slip differentials. Due to the careful selection of product components and the clean manufacturing environment, ASONIC HQ 72-102 is a rolling bearing grease with a particularly low noise level.Benefits for your application:High-temperature lubricating grease for rolling bearingsHigh purityLow noiseGood water resistanceContent:1 piece, tube with 30g

Content: 30 Gramm (€730.00* / 1000 Gramm)

€21.90*

y1072 HT Alloy differential spur gear protector

Genuine HT spare/option part.Gear protector for the bottom of the 2WD chassis plate. Replaces stock plastic part FG 6082 or Carson 32481.Contents:1 piece

€29.90*

y1528 Bearing puller for differentials

Genuine HT spare/option part. Bearing puller especially for the disassembly of ball bearings from differentials.The arms are reliably fixed at the set distance by an adjustment cone, which makes the use of this puller very easy. The thin hooks allow the use even with little space between ball bearing and differential.Dimensions: Min. opening width: 17 mm Max. opening width: 50 mm Max. height from the Clutch: 25 mmContents:1 piece

€19.90*

y0203 Shaft seal conversion kit for Losi 5ive-T and Mini differential

This kit replaces the o-ring for sealing the drive cup shaft in the stock differential case by a real oil seal. Two new shims provide for the adjustment of the width of the shaft seal and replace the stock shim.Shaft seals are better than o-rings for sealing fast rotating shafts.The set includes the parts for retrofitting all three differentials of the vehicle.Installation can be done only in the differential housing. Unfortunately the corresponding bore in the differential gears is machined differently, so you have to stay with the O-ring for that application.Set includes:Three pieces shaft seal 10 x 15 x 3 mmThree pieces shim 15 x 21 x 0.2 mmThree pieces shim 10 x 20 x 0.3 mmFive pieces washer 10,5 x 20 x 2 mm

€6.90*

6501 FG general-purpose grease 20 ml

Genuine FG spare/option part. general-purpose grease Topas L32 developed as a high-speed and low-temperature grease for roller bearing and plain bearing, non-ageing.Temperature range: -60 to 220°C.Contents:1 piece / 20 ml

Content: 20 Milliliter (€465.00* / 1000 Milliliter)

€9.30*

6501/01 FG Differential grease 50 ml

Genuine FG spare/option part. Contents:1 piece / 50 ml

Content: 50 Milliliter (€186.00* / 1000 Milliliter)

€9.30*

6065/05 FG Differential key

Genuine FG spare/option part. The differential key prevents a damage of the diff. cover through bigger stones. Suitable for all FG 1:6 Buggy and Monster models.Contents:1 piece

€4.90*

6512 FG Differential grease 50 ml

€11.90*

y19120 Drive shaft boots

Reduce the wastage at the drive shafts. Price per pair.

€6.90*

8505 FG Mounting tool for bevel gear wheels - 1pce.

We essentially simplyfied the inserting of the differential bevel gear wheels with the mounting tool. Through the exact positioning of the bevel gear wheels it is guaranteed that the differential bevel wheel axle and the differential driving axle are in true alignment from the beginning.

€7.90*

Z181 HPI Silicone diff oil vis. 1000 30 cc

Genuine HPI spare/option part. Content:30 cc / 1 piece

Content: 30 Milliliter (€329.33* / 1000 Milliliter)

€9.88*

This product is no longer available.

Customers also viewed

y1553/01 Porsche 962C 1/5 for 530/535 mm Wheelbase with rear wing with mirrow, clear

Fits on 2WD touring car chassis' with 535 mm wheelbase, FG, Carson C5 chassis and most other 1/5 touring cars with the same wheelbase. The body shell is vac-formed from 2 mm Lexan.Due to the low body shell, you need the low height FG airbox # 9043.Clear body shell for 1/5 scale for 530/535 mm wheelbase. With rear wing and mirrows.Required body mounts:Mount front: FG 7020/14 Front bumper Rear body mount: FG 7152/01 Rear body mount Side body mount front: FG 8013 Body mounts Side body mount rear: FG 3014 Body mounts Dimensions: Length: 900 mm Width: 395 mm Height: 230 mm Contents:1 piece Painting tips:

€199.90*

y1072 HT Alloy differential spur gear protector

Genuine HT spare/option part.Gear protector for the bottom of the 2WD chassis plate. Replaces stock plastic part FG 6082 or Carson 32481.Contents:1 piece

€29.90*

10654 FG Alloy engine mount - 1 pce.

€14.60*

6064 FG Differential case

Genuine FG spare/option part. Stock plastic differential case. Also available in aluminum.Dimensions:Length: 70 mmDiameter: 42.5 mmFlange diameter: 65 mmBearing seats: 12 x 8 mmShaft bore: 8 mmInner dimensions: 40 x 30 mmContents:1 piece

€25.50*

y0580 Mammoth Supergrip for 1/6 and 1/5 offroad cars glued

€119.90*

FG Sportsline 2WD-530 with Super Race Truck body and HT-Edition

Former: "Cat" Truck.The Sportsline 08 quality at a reasonable price for beginners. The Sportsline series is ideal for car modellers whose main focus is not just the chassis, but rather the combination of chassis and body shell.You can select the car with complete RTR-equipment from the options menu. RTR-equipment RTR = Ready to Run. The RTR version comes ready to use with the 2,4 GHz rc-system already installed. Transmitter: Reflex Wheel Pro III 2,4 GHzReceiver: Mini BECHigh power servo for throttle and brakeLargescale servo for steeringTx-battery, rx-battery Technical description:The models are built on a 4mm alloy chassis with double wishbones at front and rear axle. All borings of the alloy chassis are countersunk to prevent the screw heads from bearing out. The models are serial equipped with the 2-damper front axle which guarantees an optimal traction of both front wheels. At the front/rear axle you can adjust through track rods or adjusting screws with right-/left-handed thread the king pin angle, trailing effect and toe-in. Further equipment points are front disk brakes, differential gear, easy-running FG ball drive, alloy brake calliper with big brake disk, stabilizer bar front and rear, tuned pipe muffler, Evo gas tank, rear brace, 20T steel pinion, spark plug cap suppression cover, latest version (Evo) oil-pressure shock absorbers with volume control and external adjusting ring for the initial spring preload. All rotating parts as shafts, axles and clutch bells a.s.o. are supported by ball bearings. The models are equipped with a powerful 23 cm³ combustion engine. The engine needs a 2-stroke petrol oil mixture. One tank filling gives you about 45 minutes driving fun. The power is transmitted over the well-tried system: from the engine over the 2-block clutch over radial tooth wheels on to the rear axle which is equipped with the bevel differential gear with pluggable axles. RC-plate with receiver box.HT-Edition? HT-Edition means: this version comes with a big set of spare / option parts included. Steel pinions - Non-standard sizesEach of two different ratios are supplied with.Modul: m=1,5Value: 62,60 EURAlloy engine mount bigCNC machined alloy engine mount, direkt replacement for the stock plastic part, heat and tweak resistant. They come with all necessary hardware included. Value: 64,95 EUR Alloy spur gear carrierUse for 39T - 44 teeth spur gears.Value: 39,90 EUR Ball bearing set, sealed, set of 14The seal rings on sealed ball bearings keep dirt and dust out of the bearings. They are therefore particularly suitable for use in dirty and dusty environments.Value: 59,90 EURTotal value: 227,35 EURDimensions:Length: 880 mmWidth: 435 mmHeight: 380 mmWheelbase: 530 mmTrucks in action!

€1,349.95*

Configure now

y0270 Alloy differential case conversion kit for FG 2WD models

alu_diff_umbau Application: y0270/01 Smartech (except Gas Devil 4x4)

Genuine HT spare/option part.Alloy case conversion kit for Smartech / Carson 2WD and FG 2WD large scale cars .Comes complete as shown with reinforced differential tube, sealed bearings, installed needle bearings, shims, screws and o-rings.The scope of supply for FG:4 x Countersunk screw M4 x 8 mm2 x Shims 8 x 20 x 0,10 mm2 x Lenticular flange head screw M3 x 10 mm2 x Washers 3,2 mm2 x Gasket for DiffThe scope of supply for Smartech:4 x Countersunk screw M4 x 8 mm4 x Shims 8 x 20 x 0,10 mm8 x Shims 5 x 17 x 0,10 mm2 x Lenticular flange head screw M3 x 10 mm2 x Washers 3,2 mm2 x Gasket for DiffContents:1 set

€99.90*