2012-120 Mecatech Spacer for Rear Upright Bearing

€5.90*

Prices incl. VAT plus shipping costs

Available

Product number: mec_2012_120

EAN: 4058575020424

Product information "2012-120 Mecatech Spacer for Rear Upright Bearing"

Genuine Mecatech spare/option part for the FW01.

Content:

2 pieces

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

Display reviews in current language only.

No reviews found. Share your insights with others.

Customers also bought

2012-61 Mecatech Plastic Bush for Wishbones

Genuine Mecatech spare/option part for the FW01.Content:8 pieces

€18.00*

2012-07 Mecatech Plastic Bumper

Genuine Mecatech spare/option part for the FW01.Content:1 piece

€18.50*

2012-18 Mecatech Front upper Wishbone shaft

Genuine Mecatech spare/option part for the FW01.Content:2 pieces

€9.20*

2012-24 Mecatech Uniball end Wishbone M6

Genuine Mecatech spare/option part for the FW01.Content:1 piece

€22.50*

y0544 Sanding fleece Gold Microfine Pads, 100 x 80 mm

y0544 Grit: y0544/01 - 1000 grit, gold

Genuine HT spare/option part. Perfect surface preparation for paint jobs.Metal-free grinding fleece with a 1000, 1200 or a 1500 grit to roughen the inside of the body shell to improve paint adhesion. The flexible carrier of the fleece allows for a consistent, uniform contact with the work surface and makes it possible to prepare the polycarbonate to the smallest corner.Use it dry or wet when you rinse the body shell. The 1,500 grit (y0544//03) is especially recommended for metallic paint.Contents:5 pieces PadsPainting tips:

€4.90*

2012-47 Mecatech Plastic Uniball front Anti-Roll Bar

Genuine Mecatech spare/option part for the FW01.Content:2 pieces

€5.90*

Similar products

2012-106 Mecatech Aluminium Washer for Engine Fastening

Genuine Mecatech spare/option part for the FW01.Content:4 pieces

€8.30*

Details

2012-108 Mecatech Zahnrad Z64

Genuine Mecatech spare/option part for the FW01.Content:1 piece

€61.00*

Details

2012-105 Mecatech Countersunk Screw M5x12

Genuine Mecatech spare/option part for the FW01.Content:8 pieces

€3.80*

2012-107 Mecatech Gearwells Retaining Ring

Genuine Mecatech spare/option part for the FW01.Content:4 pieces

€2.60*

Details

2012-104 Mecatech Countersunk Screw M5x14

Genuine Mecatech spare/option part for the FW01.Content:8 pieces

€3.80*

2012-122 Mecatech Rear Driving Axle

Genuine Mecatech spare/option part for the FW01.Content:1 piece

€23.00*

2012-123 Mecatech Bush for rear Wheel Toe in 1° -3°

Genuine Mecatech spare/option part for the FW01.Content:4 pieces

€29.50*

2012-112 Mecatech Pinion Z24

Genuine Mecatech spare/option part for the FW01.Content:1 piece

€41.80*

Details

2012-124 Mecatech Bush for rear Wheel toe in 1,5° -2,5°

Genuine Mecatech spare/option part for the FW01.Contents:4 pieces

€29.50*

2012-121 Mecatech Square Wheel Driver 11,5 mm

Genuine Mecatech spare/option part for the FW01.Content:1 piece

€17.50*

GPM 6079/01 Ball drive wheel shaft for all FG and Mecatech cars, 1 pce.

Fits all FG cars and the Mecatech FW01. The GPM drive parts are made of high quality spring steel and due to its elasticity provide high impact resistance and extreme stability. Ground bearing seats ensure maximum accuracy of fit. Ball drives run significantly smoother and with less wear than normal dog bones with pins. The GPM ball drives can be partially mixed with FG parts. The heads of the GPM driveshafts fit into FG differential cups or wheel shafts.The opposite combination, i.e. FG shafts in GPM differential cups or wheel shafts does not always fit. We had tests where some FG shafts fit neatly, but due to slight tolerances others who did not fit into the very same cups/shafts. For this combination, we can not guarantee compatibility! Dimensions: Diameter: 8 mmTotal length 76.6 mm

From €32.90*

Details

2012-110 Mecatech Bearing for Main Shaft

Genuine Mecatech spare/option part for the FW01.Low-friction Bearing for main shaft ABEC-7, sealed on booth sides.Content:1 piece

€9.20*

Customers also viewed

Mielke 5441 Power Gearshift clutch for FG (except Formula 1+Evo2020), Smartech, Harm, Losi /HPI, Mix, 2,3mm springs with long clutch carrier

The new adjustable system features two aluminum and one carbon pad with special 2.3 mm springs.Weight of the complete clutch is 70 grams. Very wear resistent when running with the recommended clutch bells.Adjustable friction points: First gear - 8.500 U/min. Second gear - 9.300 U/min. Third gear - 10.100 U/min. Fourth gear - 11.000 U/min.With tool #5445 the engagement speed can be adjusted to different settings within a range from about 8,500 to 11,000 rpm.For RS5 models from version T14!

€129.50*

2012-203 Mecatech Brake HUB front short 12 mm

Genuine Mecatech spare/option part for the FW01.With a special mount for the brake disk.Content:2 pieces

€55.70*

Details

2012/500 Linkage set dedicated to Mecatech FW01, complete

Complete set for steering, throttle and brake linkagesSet includes:3 x 6534/02 Throttle pivot post for 2 mm linkages 1 x y0132 y0132 Linkage rod for MecaTech brakes1 x 1213/10 Steel ball 7 x 6,5 mm1 x 66244, Ball joint 7mm M41 x 1213/11 Steering linkage l./r., M4 x 42mm1 x 6020 Set collar 2,1mm1 x 1018/01 Throttle linkage Evo 09 / Comp. 077 x Nut M32 x Screw M3 x 16 mm3 x Screw M3 x 18 mm 2012/501 Throttle linkage 2012/502 Brake linkage set 2012/503 Steering servo linkage set 2012/504 Throttle/brake servo horn The Servo arm is suitable for all servos with an output shaft with 25T spline shaft, for example:y2006 Digital Big-Scale Servo D-21HVNearly all Robbe/Futaba servosMega Power servoThunder Tiger DS1015Savöx servosand many more!

€79.90*

2012-121 Mecatech Square Wheel Driver 11,5 mm

Genuine Mecatech spare/option part for the FW01.Content:1 piece

€17.50*