y0022 HT Edge trim

Chassis mud flaps for the Losi 5ive-T, made of 1.0 mm extremely durable plastic material. The mud flaps are precisely contoured to follow the 5ive-Ts roll cage and body shell. Die-cut and ready for installation featuring 15 eyelets in 3 different sizes and 4 each form and hole punchings to fit the roll cage brackets. The set also includes complete hardware for installation and an illustrated manual! Dimensions of mud flaps (laying flat): 930 x 135 mm Set includes: 2 x protective cover (right and left) 6 x cable clip 14 x fixing screws 12 x washers 1 x manual

Special remover for Lexan (Polycarbonate) and for X- and XF-color, AS- and TS-color and many more painting system until 2-K color. Does not damage the body shell!For small corrections soak a cotton swap with Color ex. Use a lint-free cloth for large area applications.Color Ex comes in a glas bottle with child-proof bottle top.Contents:100 ml / 1 piece

Genuine HT spare/option part. For all epoxy models, plastic and polycarbonate/lexan body repairs!Direction of use:Use a brush or other applicator. Apply enough Flexa Fix to the damaged area. Be careful not to apply too much in one go as it can be difficult to manipulate. If necessary apply two or three coats to build up the joint area. Use epoxy blanket of pieces of polycarbonate (Lexan) to re-enforce if necessary.You can also use the Flexa Fix to re-enforce the body corners (let the pure product leak into the corners) or to make flexible battery packs.Contents:1 piece / 100 ml

Genuine HT spare/option part. Perfect surface preparation for paint jobs.Metal-free grinding fleece with a 1000, 1200 or a 1500 grit to roughen the inside of the body shell to improve paint adhesion. The flexible carrier of the fleece allows for a consistent, uniform contact with the work surface and makes it possible to prepare the polycarbonate to the smallest corner.Use it dry or wet when you rinse the body shell. The 1,500 grit (y0544//03) is especially recommended for metallic paint.Contents:5 pieces PadsPainting tips:

Genuine HT spare/option part. Ideal for cutting polycarbonate body parts.Dimensions:Total length: 175 mmLength of edge: 35 mmContents:1 piece

Genuine HT spare/option part.50 mm wide, extra strong duct tape, i.e. for repair of cracks in body shells or for preventative taping of RC car body shells.Content:1 piece / 50 meters

Genuine HT spare/option part. Ideal for cutting polycarbonate body parts.Dimensions:Total length: 175 mmLength of edge: 35 mmContents:1 piece

Genuine HT spare/option part. Small and handy step drill, made of TiN-coated HSS steel with steps of 4/6/8/10/12 mm. Split point tip for good centering, 6 mm tri-flat shank for sure grip. For use with drills or with our hand chuck.Contents:1 piece

Genuine HT spare/option part. With non-slip surface perfect for delicate work, actually improving dexterity and grip.Available sizes: 8, 9 and 10.Glove size?Size 8 = 21 cm (S - L) circumferenceSize 9 = 24 cm (L - XL) circumferenceSize 10 = 27 cm (XL - XXL) circumferenceMeasure the circumference of your hand without the thumb and at the widest point (above the ankle). The tape measure should embrace the hand loosely.Norm EN388, Lining 100% polyamide.Partially coated with hightech nitrile Fits like a second skinGrips even when wetGood touch sensitivityLiquid-repellentGood resistance against oil and greaseContents:1 pair / 2 pieces3 pairs / 6 pieces

Genuine HT spare/option part. You can select from two different sizes of body support.Dimensions small body support y1103/01:Length: approx. 80 mmWidth: approx. 16 mmDistance bore to bore: approx. 64 mmDimensions large body support y1103/02:Length: approx. 105 mmWidth: approx. 16 mmDistance bore to bore: approx. 88 mmBore diameter: approx. 8 mmContents:2 pieces

The perfect tool for drilling perfectly round holes without cracks into a body shell.The cap protects the extremely sharp and spiky tip, the convenient handle provides secure grip on the tool.Dimensions:For holes up to 14 mm diameterLength of tip: approx. 45 mmTotal length: approx. 132 mmContent:1 Piece

Genuine HT spare/option part. Scissors for cutting and detailing of Lexan bodies. Slim design makes preparing small holes easier. Slightly curved blades for smooth radius cutting (wheel housings for example).Contents:1 piece

Genuine SCZ spare/option part. Replacement part for SCZ E290 engine, order-no. y1386. Contents:1 piece

Decal especially for Desert Buggy XL rear wing.Dimensions:250 x 100 mm

Item N° 66237/01 Gilmer belt 15mm, for Leopard 4WD 530, Offroad 4WD 535 and Sportline TW 4WD 535, 1 pce.

y0550 HT Car Bag for 1/5 scale cars (Fits FG, HPI, Mecatech FW01, Smartech/Carson a.s.o.)Fits for all 1/5 models for example: FG-: HPI-; Mecatech FW01-; Carson-; Smartech-; Conrads-; Harm-; RS5-; Lauterbacher a.s.oMade from extremely durable fabric, easily washable; with wrap-around shoulder belts and zipper closure.No dirt in the car boot!Dimensions:Length: 95 cmWidth: 50 cmHeight: 30 cmy0551 HT Car Bag for 1/6 scale cars (Fits FG, Smartech/Carson a.s.o.)Fits for all 1/6 models for example: FG Offroad-; Monster/Stadium-; Racetruck-; Carson-; Smartech-; Reely Carbon Fighter; Losi Super Rock Rey, Super Baja Rey, Axial Jeep and any more models. Made from extremely durable fabric, easily washable; with wrap-around shoulder belts and zipper closure. No dirt in the car boot! Dimensions: Length: 70 cm Width: 50 cm Height: 40 cm y0558 HT Car Bag XXL for LOSI 5ive-T, Mini 5ive WRC and Desert Buggy XL and many moreThe XXL version is especially made for the Losi 5ive-T, Mini 5ive WRC, Desert Buggy XL; Arrma Outcast/Kraton; Axial Honcho, Traxxas X-Max/XRT; UFRC GR1/Big Bully. Of course, other 1/5 and 1/6 large scale cars will fit into this bag as well; however, in this case the XXL bag gives you plenty of room for additional accessories. Made from extremely durable fabric, easily washable; with wrap-around shoulder belts and zipper closure. No dirt in the car boot! Dimensions: Length: 100 cm Width: 57 cm Height: 39 cm

Go BIG wherever you bash with the 1/6 scale Losi® Super Rock Rey® AVC® 4WD! This ready-to-run gives any driver the power and stability to succeed off the beaten path and to dominate the desert with impressive size, speed, and endurance.The Super Rock Rey® takes its inspiration from full-scale rigs that tackle the King of Hammers and similar places others wont dare go. Realistic solid axle performance joins 6S brushless power that pushes the needle to 50+ mph or more while the stability of AVC® technology lets you hold nothing back through corners and jumps.Over rough terrain, slick surfaces, and loose dirt, youll have full-throttle freedom no matter how the environment fights back. Dependable Spektrum DSMR® technology delivers precise control. Through it all, the bottom-loading battery enables fast pack changes without body removal.The large tires and new front end geometry increase suspension travel and improve performance over any terrain. Super Rock Rey loves rocky off-road tracks, and the rougher, the better! It also rips through sand, mud, water, and most any other surface condition with a new roll cage and body work creating the dirt-spitting image of 1:1 desert racing, rock crawling, off-road action.Impressive 1/6 scale size and exceptional scale looks.55+ mph speed potential to outperform the competition.Supports up to 6S LiPo battery power out of the box.AVC® Active Vehicle Control system to provide the right amount of stability for any driver.4WD independent front suspension with solid axle 4-link rear adds realism and improves performance over any terrain.4mm aluminum chassis with injection-molded roll cage provides superior durability and scale looks.Larger wheels and tires increase ground clearance to avoid hang-ups.LED light bars provide scale looks when the sun goes down.All-metal gear drivetrain increases durability.Preset motor plate provides easy, precise gear mesh.Coil-over, oil-filled shocks keep the ride smooth and plush.750Kv Dynamite® Brushless Motor and Dynamite Fuze 160A Brushless ESC are capable of 6S up to 8S power and 50+ mph speeds.Waterproof electronics withstand racing over wet and muddy tracks.Spektrum DX2E Active 2.4GHz Radio SystemLarge-scale, metal gear Spektrum steering servo withstands punishing action.Multi-piece body and driver interior maximize scale realism.Bottom-loading battery makes pack changes quick and easy, with the capacity to hold up to 6S packs.Ball Bearings: Full Ball BearingsChassis: 4mm Plate, 6061-T6 AluminumCompletion Level: Ready-To-RunDifferential: Fluid Filled, Bevel GearGear Pitch: 1.5 ModuleGround Clearance: 3.0 in (76.2 mm)Internal Gear Ratio: 4.88:1Motor Type: Non-Sensored BrushlessRadio: Spektrum DX2E Active, 2 ch DSMR with AVCShock Type: Oil-Filled, Coil-Over SpringsSuspension: Independent Front/4-Link RearVehicle Type: Off-Road Rock Racing BuggyWater-Resistant: YesDimensions:Motor Size: 56 x 87 mmLength: 27.0 in (685.8 mm)Weight: 20.6 lb (9.3 kg) without batteriesWheel Diameter: 3.2 in (81.3 mm)Wheel Width: 2.1 in (53.3 mm)Wheelbase: 20.0 in (508.0 mm)Width: 17.25 in (438.1 mm)Front Track: 17.25 in (438.1 mm)Rear Track: 16.5 in (419.1 mm)Height: 11.0 in (279.4 mm)Tire Diameter: 7.0 in (177.8 mm) Long Travel 4-link Live Rear Axle The Super Rock Reys rear suspension allows it to soak up massive whoops and bumps with the same realistic handling and movement of a full-scale desert truck. You get better control and a more locked-in feel regardless of the terrain. Long Travel Independent A-Arm Front Suspension The front, independent A-Arm suspension has been carefully engineered letting the Super Rock Rey rip across the terrain with confidence. By having fully independent suspension, it allows each side to react accordingly providing more control and more precise steering and handling. Coil-Over Oil Filled Shocks with Pre-Load adjustment The long-travel shocks do a fantastic job of soaking up the energy from big bumps and jumps. They also feature threaded shock bodies with adjustment collars so you can fine tune the pre-load settings of the coil-over springs. External bump stops provide plush landings on the hardest surfaces. 55+ MPH Dynamite Fuze 1/6th 750Kv Brushless Motor and 160A ESC The vehicle comes equipped with a Dynamite® Fuze 750Kv brushless motor and a waterproof 160A ESC. This potent combination can handle 8S LiPo batteries (sold separately) and will allow you to hurtle across the landscape at speeds of up to 55+ mph. Full Bodied Roll Cage Just like the 1:1 desert trucks, the Super Rock Rey® truck comes with a super-rigid roll cage made of super-tough composite material that enhances the trucks scale looks and durability. It is integrated with the 4mm hard-anodized aluminum chassis plate providing the ultimate protection for your truck and electronics. True-to-Scale Body Panels The two piece bolt-on body panels give the buggy an authentic factory look. These panels are polycarbonate for incredible durability and rugged good looks. Aluminum Chassis The foundation of the Super Rock Rey consists of a 4mm, hard-anodized aluminum chassis plate with a 4mm upper deck. For added durability and performance its integrated with a realistic roll cage made of super-tough composite material. Whether you are hitting the whoops, getting huge air, or just wide open, the 4mm chassis just keeps asking for more! 4X4 Driveline with Adjustable Differentials Full-time four-wheel drive provides amazing traction. Additionally the front, center and rear differentials can be tuned allowing adjustment of the power bleed between the front and rear drivetrain. The power bleeds evenly front-to-rear and the truck will drive out of the turns harder from point to point. The tunable differentials allow you to dial in your truck for maximum performance and traction. LED Light Bars (Front) The fun doesnt stop even when the sun goes down with the Super Rock Rey. Brilliant LEDs on the two front-mounted integrated light bar cast more than enough illumination for running at night. Plus, the roll cage-mounted LEDs place only a small demand on the battery allowing you to stay out all night! LED Light Bars (Rear) Just as important as the front lights, the red rear lights allow you to gauge the orientation of the buggy even in the darkest night. Large Scale Servo The robust Spektrum S904 waterproof digital servo is designed to handle whatever you can throw at it. Monstrous torque delivers the most intense Super Rock Rey® experience possible. Bottom-Loading-Batterie To help withstand the trials and tribulations of off-road driving, the Super Rock Rey incorporates our innovative bottom loading battery system, which allows you to change the batteries without removing the body. Quickly and easily make battery changes without removing the body or wrestling with battery straps. Full-Size Spare Tire Blow out a tire out on the flats? No worries. The fully-functional spare tire not only adds an authentic scale look to the Super Rock Rey®, but serves as a true spare. Easily add the tire and get back to tackling the terrain. Scale Fox Shox Looking just like their full-scale counterparts, the Fox Shox reservoirs add to the incredible scale realism of the Super Rock Rey. Scale Fire Extinguisher The Super Rock Rey features several scale details rarely included. Attached to the outside, the scale fire extinguisher is at the ready and adds to the realism of this desert racer. Scale Rear View Mirrors Scale rear view mirrors on the Super Rock Reys doors include high-end details like mirror-like chrome inserts. You can actually see your reflection! Scale Window Netting Rubberized safety window netting looks and feels like the full-scale counterparts real netting. Everywhere you look, the Super Rock Reys scale details set it apart from the competition. Fully Detailed Driver Figures The Super Rock Rey also has a molded interior that includes a driver and co-driver, both of which sport racing helmet and harness details. Suspension Limiting Straps Fully-functional suspension limiting straps look and act just like their real-world counterparts. A buckle allows drivers to adjust the length of the strap. Scale Appearing Rotors and Calipers Mounted separately, the authentic looking rotors and calipers add to the incredible scale appearance and keep the realism alive as the Super Rock Rey races over rough terrain. Authentic MAXXIS Creeper Crawler Tires True-to-scale tires look incredible, increase ground clearance to avoid hang-ups, and allow drivers to hit the ground running. Licensed Trim Schemes Licensed Raceline Wheels and Baja Designs trim schemes complete the scale details of the Super Rock Rey. These trim schemes will have racers doing double takes as they take on all comers. Spektrum DX2E Active Radio System The Spektrum DX2e Active radio system offers advanced features like AVC control, a 3-position throttle limiting switch and travel adjust. It also has an expansion port that lets you add the Spektrum Speedometer or a Bluetooth module and phone mount to utilize the Spektrum Dashboard app. The Full-Throttle Freedom of AVC® Technology The receiver"s built-in AVC® (Active Vehicle Control®) system works behind the scenes, making hundreds of throttle and steering adjustments per second, so more of the motor"s power is translated into ballistic speed and acceleration instead of just flying dirt. The patent-pending AVC system adds a level of performance that simply cannot be found with any vehicle from any manufacturer other than Horizon Hobby. Like traction control in your full-scale vehicle, you can activate or deactivate the system on the fly and adjust the level of stability based on driving conditions. Any RC vehicle can go fast and with AVC you can go faster while maintaining optimum stability in all driving conditions. It is still needed:Charger

Genuine TopTuning spare/option part.These adapter nuts, manufactured from billet 7075 aluminum allow for easy and precise installation of all MadMax, HPI and Losi 5ive tires and rims on the Traxxas X-Maxx. For the best result possible, nut and adapter are manufactured as a one-piece unit.It should be noted that the wide rims can be used on the rear axle only. On the front axle they would limit the steering angle by grinding on lower a-arm and steering rod.LosiDBXL rims do not fit the X-Maxx (depth of hex is too deep)!Traxxas has microencapsulated the wheel shafts of the X-Maxx to secure the wheel nuts. Like any thread locking compound this is not for eternity. After several tire changes the use of a normal screw locking compound is advised, we recommend it "y0113 / 01 medium strength".The dimensions of the nut are specifically designed for use with MadMax, current HPI and Losi rims. Rims from Losi 5ive have slightly different dimensions in the hub area. This is meaningless on the large LOSI or HPI wheel adapters. With the smaller and shorter wheel nut thread of the X-Maxx wheel shafts you cannot compromise. Therefore there are also special nuts for the Losi rims/wheels available at our options menu.However, somewhere in the past, the injection moulds for the HPI rims were slightly modified in the hub area. As part of that job the bore diameter has probably been slightly increased. Therefore, the use of older rims in combination with the adapter nuts makes it necessary to increase the rim bore a little bit.Due to repeated requests for use: these wheel nuts replace the stock wheel nuts when installing the wheels!Contents:4 pieces

Genuine FG spare/option part. The set includes: 10250/02 FG Body set F2000 1.5 mm 10254 FG Rear spoiler for F1 10455 Frontspoiler 10265/03 y0312 Decals Contents:1 set