Skip to main content Skip to search Skip to main navigation
EXTRA 20% off Outlet*. Use Code: EXTRA20 at checkout!!
+49 2151 820200 Mon-Fri 9 am - 6 pm, Sa 9 am - 1 pm

y0715 rc-car-online High tech mechanics gloves, nitrile, black

Product information "y0715 rc-car-online High tech mechanics gloves, nitrile, black"

Genuine HT spare/option part.

With non-slip surface perfect for delicate work, actually improving dexterity and grip.
Available sizes: 8, 9 and 10.

Glove size?
  • Size 8 = 21 cm (S - L) circumference
  • Size 9 = 24 cm (L - XL) circumference
  • Size 10 = 27 cm (XL - XXL) circumference


Measure the circumference of your hand without the thumb and at the widest point (above the ankle). The tape measure should embrace the hand loosely.

Norm EN388, Lining 100% polyamide.

  • Partially coated with hightech nitrile
  • Fits like a second skin
  • Grips even when wet
  • Good touch sensitivity
    Liquid-repellent
  • Good resistance against oil and grease


Contents:
  • 1 pair / 2 pieces
  • 3 pairs / 6 pieces

0 of 0 reviews

Average rating of 0 out of 5 stars

Leave a review!

Share your experiences with other customers.


Customers also bought

Average rating of 0 out of 5 stars

6464/05 FG Foam filter oiled
Genuine FG spare/option part.Spare part for FG no.: 6464.Dimensions:Outer diameter 61 mmInner diameter 20 mmHeight 71 mmContent:2 pieces

€13.50*

Average rating of 0 out of 5 stars

y0851/01 Spark plug wrench, Zenoah / CY with T27 Torx
Original Zenoah spark plug wrench, especially for the tiny plugs from the CY / Zenoah G230/240/260/270.

€9.90*

Average rating of 0 out of 5 stars

6452/04 FG O-ring 19x1,5mm for air filter adapter - 2pcs.
Spare part for 6452/05

€2.60*

Average rating of 0 out of 5 stars

VP99635 Transmitter Battery Li-Po 7,4V 2200mAh
2-Cell 7.4V 2200mAh LiPo Transmitter BatteryThis is a transmitter only, rechargeable LiPo battery pack that fits some Futaba transmitters and also other radio brands. Fits Futaba Transmitters: T4PM T4PLS T4GRS T4PV T4PX T6KT7PX T7XC (tight fit) T8J T10JT10PX T12K T14SG T16SZ T18SZ FX20 FX36 Make sure the transmitter battery settings are for 2S LiPo with alarm cut-off set to 6.4 volt. Specs: Type: LiPo Transmitter Battery Power Connector: Futaba Power Wire: 22AWG Balance Connector: JST-XH Battery: 2S1P LiPo Nominal Voltage: 7.4V/2S Max Charge Voltage: 4.2V/Cell Mac Charge Current: 2.2A (1C) Capacity: 2200mAh Energy: 16Wh Storage Voltage: 3.7-3.8V/cell Size: Length: 73mm Width: 45mm Thickness: 15.5mm Weight: 98g Tech Notes: Charge the battery outside the transmitter with a LiPo balance charger equipped with an Futaba adapter lead and XH balancing connector Set the charger to "LiPo", 2s, 3.7v/cell

€28.90*

Average rating of 0 out of 5 stars

y0518 Hobbythek service bag
Genuine HT spare/option part. Special fabric bag to protect engines, rc-plates or other expensive items. Large opening and pull-string closure.Size:Diameter 200 mmHeight 200 mmContents:1 pieceAccessories not included.

€7.90*

Average rating of 0 out of 5 stars

y0950 Spark plug, Champion RZ7C, 3 pcs.
Genuine Champion spare/option part.OEM spark plug for Zenoah G230/240/260/270/290/320.Ideal too for PT, Chung Yang, Losi, HPI-Fuelie, Smartech, Nutech and Carson and other engines.The most widely used, qualitatively best spark plug for the model sport! Especially by the most 1/6 scale models the short ceramic body is indispensable, because otherwise on grounds of the heightened mounting position- the spark plug would protrude beyond the roll cage and therefore is extremely fragile by flashovers.Contents:3 pieces

€19.90*

Similar products

Average rating of 0 out of 5 stars

y0695 HT Tool bag
Tools and decorative items are for presentation purpose only and not included. Genuine HT spare/option part. Tool bag, extremely rugged tool bag made from reinforced fabric, sewn edge. With 41 flexible attachment loops for various tools with all-round zipper and reinforced handle.Dimensions:Width: 510 mm Height: 275 mmContents:1 piece

€22.90*

Average rating of 0 out of 5 stars

y1366 TURBO-TWIST 325 mm special XXL screw driver
y1366 Version: y1366/03 - Phillips no. 2 / PH2
TURBO-TWIST, 325 mm long screw driver in top quality.Allows easy access to hard-to-reach screws in any 1/5 & 1/6 car.Features:Soft Grip handlesExtra long 325 mm shaftChrome Vanadium hardened and tempered bladesBlackened magnetic tipsVersions:y1366/01 - Phillips No. 0 / PH0y1366/02 - Phillips No. 1 / PH1y1366/03 - Phillips No. 2 / PH2y1366/04 - Flat 1.2 x 8 x 325 mm

€6.90*

Average rating of 0 out of 5 stars

GPM-Roadtech allen head spare tips
y0600_ersatz Size: y0608 3,0 mm
Top quality spare tips, available in the following sizes: 1.5, 2.0, 2.5 and 3.0 mm.Fits GPM-Roadtech handles from screw driver set y0600.

€3.90*

Average rating of 0 out of 5 stars

y0716/01 Torx screwdriver spare blades
y0716_01 Size: y0716/T6 - T6
Very high quality Torx screwdriver blades with ¼ hexagon shaft and engraved size indication.Sizes T7 to t25 are usually required for rc-cars.Available sizes:T6, T7, T8, T9, T10, T15, T20, T25

€5.90*

Average rating of 0 out of 5 stars

y1471 Turnbuckle wrench 6 mm
Genuine HT spare/option part. Handy wrench for 6 mm turnbuckles.Maße: Wrench size: 6 mmLength: 75 mmContent:1 piece

€9.90*

Average rating of 0 out of 5 stars

DYN2834 Startup Tool Set: Metric
Key FeaturesContains most every tool needed in order to maintain a vehiclePackaged in a zippered tool pouchCompact, complete and affordableFits ASC 1/18th scale vehicles and Losi 1/8th and 1/10th scale vehicles (excluding the Losi LST platform which uses a mix of US and metric fasteners)OverviewDynamite’s startup tool sets come in either metric or US sizes and are packaged in a convenient zipper pouch providing users with the ultimate in utility and flexibility. Containing almost every tool needed in order to maintain a vehicle these tool sets are the perfect add on for users looking for an easy and affordable tool set for their RC collection.Compatible with the following brands:ARRMA, Axial, Traxxas, Kyosho, Ofna, Tamiya, HPI, Hot Bodies, Mugen, CEN, GS Racing, Associated, and Losi minis.Includes:NUT DRIVERS- 4, 5, 5.5, 7, & 8mmHEX DRIVERS- 1.5, 2, 2.5, 3, 3.5 & 4mmPHILLIPS- #0, #00 & #1FLATBLADE- #2, #3 & #4BOX WRENCH- 3, 4, 5.5, 6mm

€32.99*

Average rating of 0 out of 5 stars

y1367 TURBO-TWIST 325 mm special carburetor screw driver
y1367 Version: y1367/01 - 1,0 x 5,5 x 325 mm
TURBO-TWIST, 325 mm long screw driver in top quality. Allows you to set the carburetor on almost any 1:5 / 1:6 model also with a mounted body shell.On most models, you have to adjust the motor with this screwdriver does not even stoop.Caution:May differ from picture!

€9.90*

Average rating of 0 out of 5 stars

y0302 Torx screwdriver T25
Genuine HT spare/option part.High quality Torx screwdriver.Contents:1 piece

€11.90*

Average rating of 0 out of 5 stars

G004 Carson Sparkplug tool
Genuine Carson spare/option part. Contents:1 piece

€9.80*

Average rating of 0 out of 5 stars

6833/25 FG Bits insert Torx TX25 - 1pce.
Bit insert, completely hardened, high dimensional stability, toolmaker quality, for Torx screws size 25.

€4.20*

Average rating of 0 out of 5 stars

y0716/02 Torx screwdriver unit handle module
Genuine rc-car-online spare/option part. Very high quality Torx screwdriver handle module with rc-car-online logo.Contents:1 piece

€9.90*

Average rating of 0 out of 5 stars

y0037/05 Allen key bit 1/16“
High quality bit made from S2 steel by KS-Tools. Fits the Allen screw on the throttle lever of our ball raced carbs and the screws for the ball joints on GPM trailing arms SB014L.Content:1 pieces

€4.90*

Customers also viewed

Average rating of 0 out of 5 stars

y1104 Maintenance tray for 1/5 cars
Genuine HT spare/option part. Maintenance tray for all 1/5 scale RC car models. The tray with its rubber pad prevents the car from sliding while working on the vehicle at the race or in the basement.Dimensions:Length: 370 mmHeight: 60 mmWidth: 170 mmContents:1 piece

€44.90*

Average rating of 0 out of 5 stars

TW-04 Mecatech Winter jacket
mec_tw_04 Size: M - Medium
Genuine Mecatech spare/option part. Please note:Due to the variety of sizes, the garments will be ordered from Mecatech only after receipt of payment and usually arrive at our shop after approx. two weeks. We ask for your understanding. Available sizes:Contents:1 piece

€159.90*

Average rating of 0 out of 5 stars

BJ012 GPM Aluminum transmission case for HPI Baja / Carson Wild GP Attack
Genuine GPM spare/option part. High quality cnc machined parts made by GPM Racing Products from high strength billet aluminum. Fits all vehicles from the HPI Baja 5 line and Carson Wild GP Attach.Contents:1 piece

€149.90*

Average rating of 0 out of 5 stars

GRP Formel 1 tires S1 vorne, used "1"
1 pair of Formula 1 tyres S1 on white GRP rims with 18 mm square, used. -Diameter 133 mm -width 65 mm See photos for condition and scope of delivery.Also for many off-road models such as FG and Carson with 18 mm square, who want to drive their vehicle on asphalt to protect their off-road tyres, as these are not suitable for this use.

€15.00*

Average rating of 0 out of 5 stars

y0963 FG manuals set Marder Race 2WD, set
Genuine FG manual as included with the car.

€3.90*
%

Average rating of 0 out of 5 stars

TT1030/02 Top Tuning CAR-STAND Set incl. tool tray and transport bag
The set consists of:  - TT1030 Top Tuning CAR-STAND for 1:5, 1:6, 1:8 and 1:10 models.  - TT1030/01 Top Tuning Tool Tray  - y0550 Carrying bagIdeal work stand with extra wide tripod up to 100 kg. load capacity with excellent stability, even on uneven (!) urface.Specially made support mechanism, individually adjustable width from 115 mm to 375 mm for most RC cars from 1/10 to 1/5 scale.incline from 0 to 90°Quickly folded and loadedFor easy storage, as well as for transport completely foldable! (Carrying bag available!)Height adjustment of the support from 635 mm to 1000 mm and inclination from 0-90° Length of the support surface 386 mmBis zu 100Kg belastbar!Support mechanism continuosly adjustable in widthDue to various adjustment options, the Top Tuning CAR STAND offers the optimal possibilities for making adjustments or maintenance work on the RC car.The load capacity and stability are beyond doubt with a load limit of 100 kg and the extremely stable tripod.The up to 90 ° adjustable slant shows your RC car at events and presentations, as well as in your assembly room to its best advantage!6.5 kg. weightPivoting bracketHeight adjustable from 69 to 104 cmBasic frame is made of steel, painted or chromedCar bracket is made of aluminum and stainless steelA tool holder TT1030/01 is also available as an accessory in our shop selection.

€239.00* €299.70* (20.25% saved)

Average rating of 0 out of 5 stars

8539 FG Measuring bench 740mm - 1pce.
Item N° 8539 Measuring bench 740mm - 1pce.Allows a measuring of toe-in and adjusting of both sides the same time without changing the side. For an optimal usw you need 2 . Suitable for all FG models except Formula 1.

€67.95*
Loading...
Upload in progress, please be patient ...
Shopware-Theme Development Shopware-Theme Development