The Lightscale spoiler for Formula 1 cars is a form-blown plastic part which is hollow inside and the outside has the effective wing shape. The plastic used is extremely durable and lightweight. The lateral supports are made of Carbon and offer the possibility to set the wing at an angle and adjust the hight. The integrated carbon wingrestraints facilitates a securely screwed wing. The shape of the wing is optimized to bring a good downforce at minimum storage effect, thus ensuring the safe driving through fast corners without sacrificing top speed on straight sections. The total weight of the wing, including all attachments is about 160 grams and is therefore lighter then many carbon wings. The wing has already proved it's durability during crash tests, but still ofcourse all its components are also available separately. The Wingset is designed compatible with the RS-5 Carbon Wing so you can exchange wings from both sets. RS-5 Wings will fit the Lightscale Winglets as well as Lightscale seperate Wings will fit the RS-5 Winglets. Lightscales groundplate oft he wingset is a wing as well and therefore offers additional downforce while even one more wing can be applied tot he set.Painting tips:
Chromed three-chamber tuned pipe system for Carson Wild GP Attack and HPI Baja buggies from the Australian exhaust manufacturer Powerslide Racing. Theres no need for cutting the stock Baja body shell for installation! Unlike many tuned pipe systems which are mounted in the rear of the Carson Wild GP Attack and HPI Baja cars and compromise power output due to the restricted available mounting space, the side mounting of the Riot Stampede allows for an optimized three-chamber system.You can see the Riot Stampede's multi-chamber design in the cutaway model shown in picture 9. The mounting system of Riot Stampede is secured by a tension spring and also provides the necessary flexibility even for jumps. The side mount uses a chromed adapter which is securely bolted to the chassis frame of your car. Set includes: Chromed tuned pipe Header and mounting bracket Complete installation hardware, as well as tension spring and exhaust hose
The new GRP tire XM1plus was produced to complement the GRP 2023 tire range because the vehicle set-up of the 1:5 RC cars showed that the grip between the compound difference of the XM1 and the XM2 proved to be a little too big.The addition of the GRP program with this new mixture of the XM1 plus, which consequently lies between the XM1 and XM2 in terms of grip, has shown that this often enables a more precise vehicle set-up and is particularly recommended for longer races, such as final runs.This pair of XM1plus tires has the following performance characteristics: HIGH GRIP for clean tracks. HIGH GRIP for medium to coarse asphalt grain. HIGH GRIP for medium to high temperatures. This pair of Tyres have the following technical features: REVO treated profile for the maximum traction and the maximum lateral grip. Treated profile studied to maintain the tyre surface alway clean from rubber murble. Compound exclusively developped for model tyres. Inside belt flexible but very strong, vulcanized directly together with tyre compound. Insert foam with special material for high temperatures, for maximum stability and high drive precision. Spoked wheel moulded with special material for high temperatures for maximum grip and stability. Special gluing system 100% guaranteed.The main sizes for this tyre are: WHEEL fixing with square 18mm. TYRE outside diameter 118mm. WHEEL inside diameter 90mm. TYRE tota width 65mm. Note:The harder a tire compound - the longer it lasts, but the more moderate the performance.The softer a tire compound - the better the performance, but the lower the durability. Hint!As a rule, the same tires can be used for front and rear.If the vehicle tends to oversteer, this can be avoided by using a harder front tire!In wet conditions you should use a rain tire which offers maximum grip under these circumstances.With the use of Magic Rain, a tire traction compound, the grip can be further improved.Check your tires after driving! It can happen that a tire starts to detach from the rim, in this case you should glue this spot immediately with our tire repair kit (y0067), otherwise the tire could detach completely from the rim.So find out which tire is the best for you!
240 mm wide rear wing base plate, spare part for the RS-5 Formula 1 wing. The weight is the same as the RS-5 carbon wing; but the Lightscale plastic wing is significantly tougher and cheaper to replace if necessary. You need Lightscale inserts # 50053930 for installation of the carbon side flaps. With hole for spacer bushing.
€22.90*
This product is currently not available.
This website uses cookies to ensure the best experience possible. More information...