16 products found for "y0190"

rc-car-online - Home

y0100 Carson offroad tyre 150mm with insert

Original Carson article Offroad tyre with foam insert without rim. Diameter 150mm Width 75mm Front cut-out diameter 80mm Rear cut-out diameter 109mm 1 pair Scope of delivery see photos Tyres fit on Losi rim LOS45020

€29.90*

y0790 SPEED TEC EXPERT Zenoah G230 tuning engine

The SPEED TEC EXPERT genuine Zenoah G230 engine is optimized for performance with sophisticated craftsmanship and guarantees, besides greatly increased performance, excellent workmanship and stamina. SPEED TEC EXPERT version modifications: Cylinder: Adjustment of compression; enlarged ports, fuel management milled, modified exhaust and intake. Piston: weight reduced; skirt shortened; oil rings, piston above and below piston ring tapered and piston dome ground. Crankshaft: is adjusted and aligned. Flywheel: weight reduced and checked for runout. Gaskets: use of premium quality gaskets.To achieve the optimum performance gain of a SPEED TEC EXPERT engine, we recommend the use of a tuned pipe ( to the tuned pipes ).

€649.00*

Engine kill switch with protective rubber cover, y0090

Engine kill switch with protective rubber cover, eliminates the hassle with sticking kill switches. Complete with wiring for easy installation, fits Zenoah G230/240/260/270 and CY engines.

€12.00*

y0191 HT-Steel spur gear 46 teeth

Fits the y0190/46 HT-Alloy carrier with steel spur gear 46T for the layshaftInner diameter and bolt pattern are the same as a standard FG differential spur gear.Module: m=1,5Content:1 piece

€49.90*

y0190 HT-Alloy carrier for steel spur gears on the layshaft

y0190 Content of delivery: Carrier only

This carriers makes it possible to run steel spur gears on the layshaft. Pebbles heat and the high torque of monster truck applications are no longer a problem.The carrier is designed for reverse installation as seen on the FG EVO car, where the hubs of the pinion and the spur gear carrier are pointing to the outside of the car. The carrier features M8 (eight, no typo) grub screws for installation on the layshaft. This means that the tip of the screw is as wide as the flat area on the shaft and ensures best possible load distribution.Please note: the wide FG 48T spur gear 6048/2 does not fit this adapter, but it wouldn't be recommended for this application anyway; it's way too heavy.Content:1 piece

€39.90*

y0190/01 Grub screws M8 x 8mm - 5pcs

Item No.: y0190/01Grub screws M8 x 8mm - 2pcs. Spare part from:- y0190/46 HT-Alloy carrier with steel spur gear 46T for the layshaft- y0190/48 HT-Alloy carrier with steel spur gear 48T for the layshaftPart is delivered in silver or black color from vendor!

€2.20*

y0190/46 HT-Alloy carrier with steel spur gear 46T for the layshaft

€89.90*

y0190/48 HT-Alloy carrier with steel spur gear 48T for the layshaft

€89.90*

HT Aluminum rear suspension conversion kit for FG 1/6 cars,2WD, y0990, set, SO

Alloy rear axle conversion kit for all FG 2WD 1/6 cars: Marder, Off-Road Buggy, Beetle, Race Truck and all FG Monster / Stadium models.The set includes:- rear plate- differential mounts- lower a-arms- upper a-arms- installation hardware.Please note: must use inge pins 6075 instead of 6073!

€239.90*

y0196 Cask-shaped springs for 16 mm Shocks

ha_0050 Version: y0196/F15 - Orange/black

Genuine HT spare/option part. Available in several versions. The springs are suitable for shocks with 16 mm diameter.For the front axle:order no.:Wire size/Length:Color:y0196/F12,4 x 48 mmyellowy0196/F22,5 x 48 mmorangey0196/F32,6 x 48 mmredy0196/F42,7 x 48 mmpurpley0196/F52,8 x 48 mmblueFor the rear axle:Order no.:Wire size/Length:Color:y0196/F122,4 x 55 mmyellowy0196/F132,8 x 55 mmorangey0196/F142,5 x 55 mmbluey0196/F152,6 x 55 mmorange / black stripey0196/F162,3 x 55 mmredOil recommendation for genuine Evo shocks:viskosity 3000 for cold weather viskosity 4000 for hot weatherContents:2 pieces

€17.90*

Self adjusting hose clamps, y0170 - 2pcs.

For use with teflon tube, pair.

€5.10*

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Ball bearings 8x16, y0193 - 4pcs.

Sealed (2RS) ball bearings 8x16 mm, for elcon steering blocks. Set of 4.

€20.50*

y0690 FG manuals for Leopard 2WD from 2010, 1 St.

y0690 Language: German

Item N° y0690 FG manuals for Leopard 2WD until 2010, 1 St.Genuine FG manuals as included with the cars.

€3.90*

y0109 Universal radio plate for FG 1/6 2WD

Genuine HT spare/option part. Universal radio plate for FG 2WD Marder/Beetle/Off-Road Buggy/Pajero an all Monster and Stadium models. With drilling templates for the following steering servos:Hitec HS-805BB/HS-5745/5735/Orange Power MPX Jumbo und Rhino The size of the steering servo can vary because you can adjust the position of the aluminum tray bar to accomodate larger or smaller servos. You will need FG adapters for installation of the gas / brake servo: #5014/04 servo mounting frame for (standard sized) Futaba / JR, Thunder Tiger DS1015 - 2pcs. Accepts FG servo frames for up to two throttle/brake servos (not included). Spacers for rx-box installation are included.Old version chassis plates (~pre 2003) have a different bolt pattern. When installing this radio plate on an old chassis new mounting holes must be drilled into the chassis plateThe surface is plain aluminum. With the necessary effort it can be polished to a high luster.Contents:1 piece

€99.90*

y0910 Hörmann / Mammoth Jumbo foam inserts

Fits Mammoth and Hörmann Jumbo tires on FG rims with extension ring only. Priced per pair.

€9.90*

y0191/01 HT-Steel spur gear 48 teeth

Fits the y0190/48 HT-Alloy carrier with steel spur gear 48T for the layshaftInner diameter and bolt pattern are the same as a standard FG differential spur gear.Module: m=1,5Content:1 piece

€49.90*

16 products found for "y0190"

Filter products

rc-car-online - Home