28 products found for "clarks_50353011"

rc-car-online - Home

50353011 Support Blocks for the Lightscale Droop Gauge front 30 mm, 1 pce.

Item N° 50353011Support Blocks for the Lightscale Droop Gauge front, 1 pce.This is an Alloy Support Block anodized in black colour with 30mm height.The Support Block is manufactured as a rectangle and so can used a 30mm, depending on which side you choose.The front block uses a single point of support while the rear one comes with two of those. Due to this 3 point support it is assured that even a little tweak in your chassis (none of them is 100% straight) will not affect the result of your measurement. Remove the wheels and tyres from your car and put the car onto the support blocks. Ideally the rear block is positioned to the back of car and the front one just where the servo saver is fixed to the chassis. The car is now propped on the support blocks safely and cannot bounce. Please make sure that no dirt or rubber is trapped between the Support blocks and the chassis.Now you can easily and correctly measure the droop of each axle and adjust the cars` tweak.To do so please use the Lightscale Droop Gauge (50835400)The use of Lightscales` Droop Gauge Support Blocks prevents incorrect measurements and therefore is absolutely reliable. Measurements which are done using a flat surface where the chassis is resting on, like you would use in the pits are usually incorrect due to a slightly tweaked chassis because dirt underneath the chassis will falsify the measurement and lead to a irregular setup. The use of Support Blocks which are based on 4 support points will result in the same incorrect results and downgrade the performance of your car which is why we 100% recommend the use of our support block because as racers ourselves we know all about the problems you may face.

€24.90*

50353021 Support Blocks for the Lightscale Droop Gauge 35 mm rear, 1 pcs.

Item N° 50353021Support Blocks for the Lightscale Droop Gauge 35 mm rear, 1 pce.This is an Alloy Support Block anodized in black colour with 35mm height.The Support Block is manufactured as a rectangle and so can used as a 30mm as well as a 35mm, depending on which side you choose.The front block uses a single point of support while the rear one comes with two of those. Due to this 3 point support it is assured that even a little tweak in your chassis (none of them is 100% straight) will not affect the result of your measurement. Remove the wheels and tyres from your car and put the car onto the support blocks. Ideally the rear block is positioned to the back of car and the front one just where the servo saver is fixed to the chassis. The car is now propped on the support blocks safely and cannot bounce. Please make sure that no dirt or rubber is trapped between the Support blocks and the chassis.Now you can easily and correctly measure the droop of each axle and adjust the cars` tweak.To do so please use the Lightscale Droop Gauge (50835400)The use of Lightscales` Droop Gauge Support Blocks prevents incorrect measurements and therefore is absolutely reliable. Measurements which are done using a flat surface where the chassis is resting on, like you would use in the pits are usually incorrect due to a slightly tweaked chassis because dirt underneath the chassis will falsify the measurement and lead to a irregular setup. The use of Support Blocks which are based on 4 support points will result in the same incorrect results and downgrade the performance of your car which is why we 100% recommend the use of our support block because as racers ourselves we know all about the problems you may face.

€29.90*

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

50032200 Clarks Upgradekit SDT auf STX

Genuine Lightscale spare/option part. Contents:1 piece

€119.00*

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

305035 Space cover

€6.90*

5301 FG Crank case A+B

Genuine FG spare/option part. Spare part for all Chung-Yang engines.Contents:2 pieces

€67.90*

LOS253015 Schock shafts 6IX

Genuine Losi spare/option part.Content:2 pieces

€15.99*

2435 FG Body detailing kit McLaren

Genuine FG spare/option part. Content of delivery as shown in the picture.

€11.40*

Details

LOS253012 Shock Pistons 6IX

Genuine Losi spare/option part.Content:4 pieces

€20.99*

LOS253016 Shock bodys 6IX

Genuine Losi spare/option part.Content:2 pieces

€20.99*

LOS253017 Shock adjustment nut 6IX

Genuine Losi spare/option part.Content:2 pieces

€15.99*

LOS253018 Shock cap Top and Bottom 6IX

Genuine Losi spare/option part.Content:2 pieces

€41.99*

LOS45035 Losi Slicers Rib Tire, DBXL-E 2.0

Genuine Losi spare/option part. Contents:1 pair / 2 pieces

€49.99*

30110 FG Body Monster-/ Stadium-Hummer H2, yellow, for 2WD

Genuine FG spare/option part. The bodyshell is made from colored polycarbonate.The decal set is not included!Length 660 mmWidth 290 mmHeight 195 mmWheelbase 460 mmContents:1 piece

€129.90*

LOS253012 Shock rebuild kit 6IX

Genuine Losi spare/option part.Content:1 Set

€31.99*

LOS253014 Springs Medium 6IX

Genuine Losi spare/option part.Content:2 pieces

€15.99*

VTR235035 Vaterra Cap Head Screws, M3 x 30 mm

Genuine VTR spare/option part. Contents:10 pieces

€4.99*

y3011 Team Decals set Mafia car

Genuine HT spare/option part. Mafia style decal set, suitable for all cars.Dimensions:450 x 400 mmContents:1 piece

€29.90*

10353/02 FG Pushrod lever, ballraced, F1 Competition

Genuine FG spare/option part.For use with bearing: Contents:1 oiece

€47.90*

TLR 353004 Bleeder shock cap screws and Washers, 5ive-T, TLR 5ive-B and Mini WRC

Genuine TLR spare/option part.Content:2 piece

€5.99*

This product is no longer available.

LOS253019 Losi Fr/Rr Shock Body, Cap, AL, silver MTXL

Genuine Losi spare/option part.Contents:2 pieces

€59.99*

10353/03 FG Bushing for ballraced pushrod lever - 2pcs.

€9.90*

LOS253010 Shock springs, Complete Losi DBXL+MTXL 1/5 4WD

Genuine Losi spare/option part.

€39.99*

10353 FG Front pushrod lever, ball raced for F1 Competition

Genuine FG spare/option part.New designed front pushrod lever system for FG F1 Competition chassis. Ball raced damper levers with M5 mounting bolts. Increased shock piston travel. The set includes all parts necessary for the conversion.Contents:1 set

€143.95*

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

LOS353007 Losi Lower Shock Cap, Aluminum, 5ive-T / B

Genuine Losi spare/option part. Contents:2 pieces

€29.99*

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

28 products found for "clarks_50353011"

Filter products

rc-car-online - Home