y3011 Team Decals set Mafia car

Genuine HT spare/option part. Universal sponsor decals suitable for all body shells. The decals are printed on clear film and have to be cut out by yourself.All logos are 40 mm wide, their heights differ depending on the logo; four logos each per sheet.With logos from: Kenwood, Sparco, Shell V-Power, Sonax, Recaro, O-Z Racing, Hankook, ABT, Michelin, H&R, Eibach, Castrol, Akrapovic, Bosch, Bilstein.Size (Height x Width):Complete sheet: 310 mm x 450 mmThis decal set is also available in the elasto version! Decal sets made from elasto film are substantially more durable and have a much more massive adhesive layer. Unfortunately, the elasto film has three times the price of the vinyl normally used for decal sets. Therefore the elasto decal sets have an approx. 30% higher price. And sorry, but the choice of elasto decal sets is still limited at the moment! Attention:Due to the special surface properties of TPE (elasto plastics), elasto decal sets are strongly recommended for TPE body shells. However, with the usual polycarbonate body shells the standard decals are sufficiently durable.Contents:1 piece

Alfa Romeo decals for front and rearheadlights, radiator a.s.o., with FG labels.Sheet dimensions:305 x 210 mm

Genuine HT spare/option part. Universal decals suitable for all body shells. The decals are printed on clear film and have to be cut out by yourself.Size (Height x Width):Complete sheet: 285 mm x 390 mm3 x Number frame: 105 x 90 mm3 x Numbers from 1 to 0: 50 mm (different widths)This decal set is also available in the elasto version! Decal sets made from elasto film are substantially more durable and have a much more massive adhesive layer. Unfortunately, the elasto film has three times the price of the vinyl normally used for decal sets. Therefore the elasto decal sets have an approx. 30% higher price. And sorry, but the choice of elasto decal sets is still limited at the moment! Attention:Due to the special surface properties of TPE (elasto plastics), elasto decal sets are strongly recommended for TPE body shells. However, with the usual polycarbonate body shells the standard decals are sufficiently durable.Contents:1 piece

Genuine HT spare/option part. Dimensions Jägermeister Logo:1 x 170 mm diameter1 x 90 mm diameter4 x 50 mm diameterDimensions Jägermeister lettering:1 x 250 mm width, 4 x 210 mm width,1 x 130 mm width, 2 x 60 mm width, Dimensions Dezent lettering 4x 110 mm width Total dimensions: Width: 490 mm Height: 420 mmIn the shopping cart selection of this large Jägermeister team decal sheet,this is also available in a with an extra charge under item number y0683/01high-quality opaque screen print version, available on a special film.This decor set is especially for decorating on dark Body colors suitable.Contents:1 piece

Genuine FG spare/option part. Mini Challenge Team decals with red and white stripes, writings a.s.o, suitable for the MIni Cooper bodyshell.Dimensions:500 x 230 mm455 x 115 mmContents:1 set

Mammoth Supergrip onroad 60 and 80 mm tires on white FG rims complete glued, 1 pair.Mammoth Supergrip onroad tires on FG rims for 1/6 and 1/5 offroad cars.Suitable for asphalt surfaces such as car parks and race tracks.   Racing tyres for your off-road model.VersionWidthOuter diameterFront64 mm153 mmRear78 mm153 mmGlued on genuine FG rims (rear tires using extension rings outside ), with foam rubber inserts included. Rim has 18 mm square drive with reinforcement ring.Please note: based on experience we recommend against using other manufacturers rims and extensions. Since the Mammoth tires provide very good grip the rim and the bonding must withstand high loads. Due to the high torque load on the bonding of tires on largescale cars, checking the bonding from time to time and re-glueing (y0067) if necessary is unavoidable.The Mammoth Supergrip is available in in the following compounds: Super softSoftMediumHardFront tirey0581y0582y0583y0584Rear tirey0591y0592y0593y0594General recommendation:The dirtier the track or the lower the ambient temperatures, the stickier (softer) the rear tires should be.Hint regarding the front tires: 2WD cars should use them one or two grades harder then the rears. 4WD cars usually like the same compound all around.Of course, the softer the tire the higher the wear rate; and this applies to Mammoth Supergrip onroad tires as well.The tires have a special onroad thread pattern but will still provide ideal traction after the pattern has been worn out. The white lettering on the tires has been applied for presentation purpose only. The tires will be delivered with black sidewall.Prices per unit: FrontRearMammoth Supergrip:Pair44,90 EUR49,90 EURTire inserts:Pair13,00 EUR13,00 EURFG rim:Pair14,90 EUR14,90 EURFG extension ring:Pair--.-- EUR14,90 EURMounting:Pair13,00 EUR13,00 EURPrices Total                                                                                          85,80 EUR    105,70 EUR