13 products found for "at_5t013"

rc-car-online - Home

AT-5T013 ATOP Rear camber rods 5ive-T/2.0

Genuine ATOP spare/option part. Upper rear camber rods with guide bushing set and with pivoted steel ball joints right/left thread and locknuts for 5ive-T. Balls with 6 mm hole, adapter bushings for 5 mm screws, shortest distance between mounting points (center/center) 140 mm. Contents:2 pieces

€34.90*

AT-5T023 ATOP Aluminum front a-arms Losi 5ive-T/2.0

Genuine ATOP spare/option part.Light weight design (108 grams each), CNC-machined from 6061-T6 aluminum by ATOP a-arms fits Losi 5ive-T front.The chassis-side is wider than stock arms to bring the large longitudinal play at this point down to a reasonable level.Bushings for the hinge pins guarantee low wear. On the wheel side floating stainless steel bushings allow for normal tightening of the c-hub screws.Contents:1 set

€79.90*

AT-5T012 ATOP Front camber rod 5ive-T/2.0

Genuine ATOP spare/option part. Upper front camber rods with guide bushing set and with pivoted steel ball joints right/left thread and locknuts for Losi 5ive-T. Balls with 6 mm hole, adapter bushings for 5 mm screws, shortest distance between mounting points (center/center) 130 mm. Contents:2 pieces

€39.90*

AT-5T019 ATOP aluminum clutch bell holder Losi 5ive-T and Mini

Genuine ATOP spare/option part. CNC-machined from 6061-T6 aluminum by ATOP. Open design for maximum clutch cooling and reduced weight. Larger 15x32x9 mm bearings for higher load capacity.Contents:1 piece

€54.90*

AT-5T015 ATOP Aluminum front transmission case Losi 5ive-T/2.0/B and Mini

Genuine ATOP spare/option part.Completely cnc-machined front transmission case from billet 6061-T6 aluminum by Atop. Service life of ball bearings and ring & pinion will greatly benefit from the increased strength of this aluminum case. It also ends the problem of stripped tread holes for the mounting screws. Weight:approx. 297 gramsContents:1 piece

€159.90*

AT-5T014 ATOP Ball-raced servo saver for Losi 5ive-B/T and Mini

Genuine Atop spare/option part. Ball-raced servo saver and steering assy for Losi 5ive-B/T and Mini. Replaces all stock parts between steering servo and steering rods except for the servo saver shafts. With ball bearings all around and dual linkages between servo and servo saver steering precision is greatly enhanced. Complete set with ball-raced servo saver, ball-raced centerlink, full metal second side servo linkage and installation hardware.Content:1 set

€89.90*

AT-5T016 ATOP Aluminum rear transmission case Losi 5ive-T/B and Mini

Genuine ATOP spare/option part. Completely cnc-machined rear transmission case from billet 6061-T6 aluminum by Atop. Service life of ball bearings and ring & pinion will greatly benefit from the increased strength of this aluminum case. It also ends the problem of stripped tread holes for the mounting screws. Set comes with bearing carriers included! We recommend to install the bearings using thread locking compound y0113. Bindulin silicone sealant y19015 is recommended for installing the bearing adaptors into the transmission case. Modification of the Atop bearing carriers is required when using HD differential drive cups y1477. Weight:approx. 418 gramsContents:1 piece

€189.90*

AT-5T003 ATOP Aluminum top chassis brace Losi 5ive-T/2.0 and Mini

Genuine ATOP spare/option part. CNC-machined from 6061-T6 aluminum by ATOP.Complete with all required hardware.Contents:1 piece

€29.90*

AT-5T018 ATOP Aluminum spring perches Losi 5ive-T/2.0/B and Mini

Genuine FG spare/option part.CNC-machined from 6061-T6 aluminum by Atop RC. Contents:2 piece

From €19.90*

Details

AT-5T017 ATOP aluminum gas cap Losi 5ive-T/B/Mini models and Carson Wild Attack

at_5t017 Color: Silver

Genuine Area spare/option part.CNC-machined from 6061-T6 aluminum by Area RC for Losi 5ive-T/B and Mini tank. Does not fit the tank from a 2.0. Even though the part number of the tank did not change, thread diameter on the 2.0 tank is a few tenths of a millimeter larger.Contents:1 piece

€17.90*

LO5T019/ACC

€2.90*

AT-5T016/01 ATOP Alloy bearing inserts, rear diff, 5ive-T/2.0/B and Mini

Genuine ATOP spare/option part. Fits the rear plastic gearbox on all cars from the 5ive series and as spare part the ATOP gearbox AT-5T016. Stock size bearings are used.Contents:2 pieces

€19.90*

AT-5T015/16 ATOP Aluminum front and rear transmission case Losi 5ive-T/2.0/B and Mini

Genuine ATOP spare/option part.AT-5T015 ATOP Aluminum front transmission case Losi 5ive-T/B and MiniCompletely cnc-machined front transmission case from billet 6061-T6 aluminum by Atop. Service life of ball bearings and ring & pinion will greatly benefit from the increased strength of this aluminum case. It also ends the problem of stripped tread holes for the mounting screws. Weight:approx. 297 gramsAT-5T016 ATOP Aluminum rear transmission case Losi 5ive-T/B and MiniCompletely cnc-machined rear transmission case from billet 6061-T6 aluminum by Atop. Service life of ball bearings and ring & pinion will greatly benefit from the increased strength of this aluminum case. It also ends the problem of stripped tread holes for the mounting screws. Set comes with bearing carriers included! We recommend to install the bearings using thread locking compound y0113. Bindulin silicone sealant y19015 is recommended for installing the bearing adaptors into the transmission case. Modification of the Atop bearing carriers is required when using HD differential drive cups y1477. Weight:approx. 418 gramsContents:1 set

€319.90* €349.80* (8.55% saved)