22 products found for "y0005"

rc-car-online - Home

y0205 HT steel pinion 17 teeth Carson/Smartech Offroad 2WD models

Original rc-car-online spare/tuning part. The sprockets are milled from steel and nitride-hardened. They all fit on the standard main gear and are fastened with 2 grub screws. The sprockets are profile-shifted and therefore all have the same diameter! Module: m=1.51 piece

€29.90*

Tuning brake pads y0050 for mechanical FG brake, 4 piece set

uning brake pad set, 4 pieces for steel brake discs. Suitable for all mechanical wheel brakes from FG and HPI y0056 to significantly increase the braking force. Set contains 4 brake pads.

€49.90*

Brake rotor, Baja premium brake, 2 pcs., y0005

Diameter 70 mm24 mm hex

€23.50*

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

y3005 RC Universal decals

Genuine HT spare/option part. Decal sheet with logos from several rc-car and supplies manufacturers. All decals are cutted with a plotter. List of manufacturers:rc-car-online.deSmartechLightscaleMecatechHPI-RacingRC-PaintRoadiesFGSpektrumClark´sLosiHorizon HobbySpeed-TecGRPBigscalerGPMPMTZenoahMultiplexLRPChung YangMotulHitecDimensions:220 mm x 330 mmContents:1 piece

€14.90*

y0003 Billet brake lever, long

Genuine HT spare/option part. Fits HT Baja 5B premium brake and FG offroad models, race truck and Formula 1.Contents:2 pieces

€24.90*

y0045 GPM Crankcase cover for 1/5 & 1/6

To ensure the required cooling for current 1/5 and 1/6 engines the flywheels have fins on both sides. Therefore the fan housing has large openings on the crankcase side for the required air supply. However, the risk of foreign objects (grass, sand, or even stones!) entering here Is very high! As a result, broken fins on the flywheel occur frequently. This leads to reduced cooling efficiency and - even more critical vibrations from a flywheel which is out of balance due to missing fins. Therefore, this kind of flywheel protection is highly recommended, especially for offroad use. The product video explains the handling in detail! Note:It is essential to thoroughly clean and degrease the crankcase prior to attaching the hook-and-loop tape (OKS2661)!For installation on Chung-Yang and Zenoah engines in FG cars, the crankcase cover must be slightly modified in two places where the engine mount is attached (see Figure 6 and 7). Furthermore the fit of the fabric must be as tight as possible in the region of the layshaft pinion (in front of the differential ring gear!) (see Figure 8).Set includes:Special tailored fabric with sewed on hook-and-loop tapehook-and-loop tape for installation to the crankcaseAdhesive for securing the hook-and-loop tape

€24.90*

Bowden cable, Baja premium brake, 1 pce., y0006

Sheath complete with core cable.Length: 315 / 395 mm

€15.90*

Brake caliper Baja premium brake, 1 pce., y0001

€30.70*

Bowden cable bracket, Baja premium brake, 1 pce., y0008

€20.50*

y0002 Bowden cable mount 1/6 and Formula 1, 2 pcs.

€12.60*

y0805 SPEED TEC HPI-Fuelie original 26er EXPERT tuning engine

The SPEED TEC EXPERT genuine 5ive-T engine is optimized for performance with sophisticated craftsmanship and guarantees, besides greatly increased performance, excellent workmanship and stamina. SPEED TEC EXPERT version modifications: Cylinder: Adjustment of compression; enlarged ports, fuel management milled, machined and polished exhaust and intake. Piston: weight reduced; skirt shortened; oil rings, piston above and below piston ring tapered and piston dome ground. Crankshaft: is adjusted and aligned. Flywheel: weight reduced and checked for runout. Gaskets: use of premium quality gaskets.To achieve the optimum performance gain of a SPEED TEC EXPERT engine, we recommend the use of a tuned pipe ( to the tuned pipes ).

€599.00*

Bearing plate for brake cam Baja premium brake, 2 pcs., y0004

€7.10*

y2005 Tuning aluminum engine mount set for all FG 4WD Sportsline cars

Tuning aluminum engine mount set for all FG 4WD Sportsline cars: Monster-Truck, Off-Road Buggy, Marder, Beetle, Touring Cars.Inhalt:Aluminum large engine / layshaft mountAluminum small engine mountAll necessary screws are included!

€99.90* €124.80* (19.95% saved)

y0003/01 Pin for Billet brake lever y0003 and y0015

Genuine HT spare/option part. Fits for the brake levers with the numbers y0003 and y0015.Contents:2 pieces

€2.90*

y0035 rc-car-online Jacket

bekl_jacke Size: M

Genuine rc-car-online spare/option part. Rugged, universal jacket with many features.BreathableWindproofWaterproofSealed seams Concealed hood in collarRemoveable synthetic fur collar liningRemoveable sleeves Removeable synthetic fur inner liningPocket with zipper and pen holder on the sleeveTwo large chest pockets with zipperMobile phone pocket with cover and hook-and-loop closureTwo large pockets Inside pocket Material: 100% polyester, lining: 70% polyacryl, 30% polyester Contents:1 piece

€35.90*

DLD Maxi Blockpass, 1 pair, y0085

y0085 Mounted/glued: Tires only

DLD Maxi Blockpass offroad tire, fits FG Marder/Leopard/Beetle/Monster models, diameter 155 mm, width 60 mm, hard rubber compound.

€41.00*

y0075 BMW 320si WTCC body shell clear, 1 pce.

Fits chassis with 535 mm wheelbase, current touring car width. EFRA and DMC homologated. Body set includes front part and main part. A rear wing is available through the shop's options menu. The body shell is vac-formed from 2 mm Lexan.Efra # 5052/06Required body mounts:Mount front: FG 7152/01 Rear body mount Rear body mount: Side body mount front: Side body mount rear: Measures:Length: 885 mmWidth: 392 mmHeigth: 260 mmWheelbase: 530 mmPainting tips:

€199.96*

y0305 Colored flexible fuel line, top quality, 1 meter

y0305 Color: y0305/06 - Orange

High quality flexible fuel line in your choice of blue, red, yellow, orange and green. Size:Length: approx. 1 meterOuter diameter: approx. 6.3 mmInner diameter: approx. 3.2 mmDiameters are 100% identical to the Zenoah Tygon hose #7352!

€5.90*

E540005 UFRC A-arm brace front suspension, rear

Genuine UFRC spare/option part. Fits Growler GX1.Contents:1 piece

€41.90*

500500053 Carson Reflex Wheel Pro III 2.4 GHz BEC

Genuine Carson spare/option part. The Reflex Wheel Pro III is the innovative 2-channel entry-level RC system from Carson-Model Sport. The steering angle and the servo travel on the throttle are adjustable (Dual Rate). This allows each model to be controlled very precisely and tuned to the road. In addition, the throttle can be limited for beginners and children. The chrome steering wheel with cellular rubber surface allows precise control and can be tilted individually forwards and backwards. The automatic stop function (low-voltage protection) integrated in the receiver is the life guard for your combustion engine model. This remote control system is ideal for all areas of RC-Car sport.Absolutely ingenious yet simple is the binding procedure:1. Switch the receiver on2. Press the setup key3. Switch on the transmitter - READY!Technical details: Operating voltage transmitter 4.8 to 6 V Operation possible with Li-Ion battery or 4x AA NiMh cells 2.4 GHz FHSS system (frequency hopping spread spectrum) Two infinitely variable, fully proportional channels Servo reverse for both channels (reverse direction) Trim function for throttle and steering Dual Rate for both channels (servo travel limit) Power supply of the BEC receiver from a battery with 4.8 - 7.2V possible Integrated fail-safe (programmable) Uni connector system for Futaba and Graupner-JR Charging socket (positive center pole) Battery status indication by means of LEDContents:1 x 2-channel transmitter 2.4 GHzBEC Mini receiver

€64.99*

LOS350005 Losi Front Hood section, Clear, 5ive-T 2.0

Genuine Losi spare/option part. Contents:1 piece

€119.99*

300058599 Tamiya 1:10 RC RAYBRIG NSX Concept-GT TT-02

Product information The Raybrig NSX Concept-GT is also released on the reliable shaft-driven 4WD of the TT-02 Chassis. The racing car was developed to race in the 2014 Japanese Super GT Series, and features a 1.6-liter turbocharged direct injection engine with anti-lag, plus a midship layout that optimizes distribution of car's weight, particularly taking into account its unique hybrid system. About the Model • This is a 1/10 scale R/C model assembly kit. Wheelbase: 257mm. • The durable polycarbonate body accurately captures the low nose and complex make up of the front and rear ends.• The TT-02 is a highly versatile and easy-to-maintain chassis. • Separate parts are included to recreate dynamic rear wing and unique door mirrors. • Comes with black 10-spoke wheels. • Includes body markings and masking stickers for use when painting the model. • A wide range of option parts is available to tune and customize TT-02 Chassis cars. • Please note that R/C equipment and battery pack are separately required. Technical details:- 1/10 scale kit model - Wheelbase 257mm - Detailed polycarbonate body (includes window masking film for painting) - Robust TT-02 chassis - 4WD shaft drive with protected drive train - Incl. electronic speed controller - Powerful 540 Torque Tuned motor Attention: Not suitable for children under 14 years.

€129.90* €160.00* (18.81% saved)

22 products found for "y0005"

Filter products

rc-car-online - Home