Tuning brake pads y0050 for mechanical FG brake, 4 piece set

Affordable standard brake lining with good braking deceleration. Glued on a steel plate. Spare part for , , , , and .Length approx. 50 mmWidth approx. 10 mmThickness approx. 5.5 mmMounting hole distance 40 mm

Special offer price!  Including Mecatech Expert hydraulic brake on the front axle.  Vehicle is pre-assembled, with a 26 cm³ combustion engine and almost 100 km/h fast, what more could you want? Another improvement is the hydraulic disc brake in the front wheels. (included, not installed) A crystal-clear polycarbonate body is included. Quality and high-quality equipment at a reasonable price. Technical description of the Formula 1 Sportsline chassis: The chassis of the FG Formula 1 is built on a high-strength 5 mm aluminium chassis. All chassis holes (screws) are countersunk from below. The front and rear axle with versatile adjustment options such as camber, caster etc. consists of double triangular wishbones. The double triangular wishbones of the rear axle are supported by additional track rods, with which the adjustment work can be carried out as quickly as possible. Thanks to the mounted wishbone threaded rods with right-hand and left-hand threads, all adjustment work can be carried out without dismantling any parts. The model is equipped with 4 aluminium oil pressure shock absorbers. The push-rod suspension ensures play-free transmission from the individual wheel suspension to the shock absorber. The Formula 1 chassis is supplied with a powerful 26 cm³ combustion engine. Power is transmitted via a four-jaw Teflon clutch to a toothed belt drive. This toothed belt drive is also designed for increased drive power. The BBS rims and tyres were modelled on the large prototypes. All rotating parts are mounted on ball bearings. The construction of the Formula 1 chassis is not identical to the other 1:5 FG models such as the Mercedes C-Class, racing truck etc. and therefore cannot be converted to these models using conversion kits.In unserer Shopauswahl ist das Modell auch inklusive kompletter RTR-Ausstattung erhältlich!RTR AusstattungRTR = Ready to Run. Die RTR-Version wird fahrfertig und mit montierter 2,4 GHz Fernsteuerung ausgeliefert.Sender 2,4 GHzEmpfängerHochleistungsservo für Gas und BremseGroßmodellservo für LenkungSenderakku, EmpfängerakkuMaße:Länge: 960 mmBreite: 440 mmHöhe: 230 mmRadstand: 620 mmFormel 1 Modelle in Action!Antrieb:2WDMaßstab:1:5Motorisierung:BenzinRTR:RTR auswählbar

Original FG article.  4 pieces

Suitable for Collari hydraulic brake.

Genuine HT spare/option part.Wheel squares made of high-strength aluminum, hardened, with two M6 mounting threads Suitable for most 1/6 and 1/5 rc-cars. Through the use of two 6 mm screws a significantly higher retention force is achieved. Yet it is still recommended to use medium strength thread lock (link y0114)! The hard anodizing (HART-COAT) guarantees much lower wear of the squares! Especially recommended when using wheel mounted brake discs! Four 3x16 dowel pins per square are included which prevent the squares from spinning in the rim. Press fitting them into the wheel squares is optional. The 12, 14 and 17 mm wide squares feature a groove for inserting a C-clip (link 6106/05), which acts as a guide for the brake disk. The narrow 9.5 mm wide squares dont need a clip; the close sitting rim will guide the disk. Measures18 mm square (wheel drive!)9,5 mm wide, 8.0 mm diameter axle boretwo M6 mounting threads The set includes 2 pieces of 9,5 mm wide wheel squares and 4 pieces each of M6 grub screws and 3x16 dowel pins.Contents:2 pieces