EXTRA 20% off Outlet*. Use Code: EXTRA20 at checkout!!
+49 2151 820200 Mon-Fri 9 am - 6 pm, Sa 9 am - 1 pm

y0553 Zenoah G260RC with Walbro carburetor WT 603B

Product information "y0553 Zenoah G260RC with Walbro carburetor WT 603B"
This is the G260 in the 26 cm³ version.

The engine will be delivered with pull starter, carb and spark plug / spark plug cap. Genuine Zenoah air filter and / or complete clutch and / or ball beard carburetor are optionally available at additional charge.

Compatibility Zenoah / Losi 5ive-T:
Please note that for installation in a Losi 5ive the fan cover must be swapped for a Losi or CY cover #5341 in order to fit the chassis" bolt pattern.If you want to install a Zenoah engine into the Losi 5ive, you usually have to use a fan cover from the CY engine.
However, there is a workaround to maintain Zenoah fan cover.

The adjustment is done via the pinion specific mounting plates for the engine. The change always affects only the rear, outer (carburetor side) plate under the fan cover. This is rotated by 180°; so that the embossed number on this plate faces the exhaust side of the engine!

  • 18T pinion: use 20T plate, rotated 180°
  • 19T pinion: use 19T plate, rotated 180°
  • 20T pinion: use 18T plate, rotated 180°
On the plus side you gain the opportunity to easily mount a Zenoah engine keeping the original fan cover. On the other hand there will be the disadvantage of the necessity to combine two different sets of engine mounting plates when installing any pinion other than the stock 19T version. Therefore we do not recommend this workaround for everyday use. Nevertheless it works perfectly should ever the need arise.


018ddb112ca4707699958e078f158e8c.jpg


0 of 0 reviews

Leave a review!

Share your experiences with other customers.


Loading...
Upload in progress, please be patient ...
Shopware-Agency Shopware-Theme Development