5851 Mielke Power Gearshift II Converse clutch for FG, Harm SX3, RS5, Losi, HPI Carbon with 2mm springs, long clutch carrier
€129.50
Available
Product information "5851 Mielke Power Gearshift II Converse clutch for FG, Harm SX3, RS5, Losi, HPI Carbon with 2mm springs, long clutch carrier"
Fits for FG, Losi, HPI.
For onroad vehicles, less Grip or rain use.
Backwards installedshoes make this clutch a "Converse" clutch!
After many successes with the "normal" Power Gearshift clutch this is the next step.
Made of high-strength aluminium 7075-T6! All components, including the pads, are manufactured on precision machines.
Contents:
- 1 piece
Login
Accessories / Spare parts
Genuine Mielke spare/option part.Clutch carrier for Mielke Power Gearshift II clutches part numbers 5641 and 5651.Content:1 piece
Genuine Mielke spare/option part.Front cover for Mielke Power Gearshift II clutches part numbers 5641 and 5651.Content:1 piece
Genuine Mielke spare/option part.Clutch shoes for Mielke Power Gearshift II clutches part numbers 5640, 5641 and 5642.Content:3 Pieces
Genuine Mielke spare/option part. Contents:3 pieces
Genuine Mielke spare/option part. Replacement part for Mielke Power Gearshift 2 clutches.Contents:3 pieces
Adjustment tool for Mielke Power Gearshift clutches #5440 and #5441.
Genuine Mielke spare/option part. For easier change of springs or clutch shoes.Contents:1 piece
Customers also bought
Genuine Mecatech spare/option part for the FW01.Contents:1 piece
Genuine Speed-Tec spare/option part. For Zenoah G230/G260AN - expansion sealing gaskets are in use in the 2-stroke motor sports for years and are based on NBR-linked cellulose fibers. They are especially used for sealing hot oils, greases and fuels! The sealing material is compressed during assembly, and as soon as it comes into contact with fuel, it swells again. Thus it is e.g. possible to make up for irregularities in the sealed surfaces (e.g. cylinder / crankcase) and seal them properly! The material of the SPEED TEC AN - expansion sealing gaskets guarantees a very good dimensional accuracy and is often the solution for leaks on your engine! Technical data of the material in contact with fuel:Rebound ASTM G > 30%; increase in thickness < 5%; weight gain < 55%;Compressibility ASTM F36 G 22.5% +/- 2.5 27.5% +/- 7.5 The SPEED TEC AN - expansion sealing gaskets are available in the following versions:# ST-AN26V carburetor gasket 0,25/0,50 mm# ST-AN25I insulator gasket 0,25/0,50 mm# ST-AN24L air filter gasket 0,25/0,50 mm# ST-AN22 cylinder gasket, two bolt 0,25/0,50 mm# ST-AN42 cylinder gasket, four bolt 0,25/0,50 mm# ST-AN23G crank case gasket 0,25/0,50 mmContents:1 piece
Genuine FG spare/option part. Only suitable with standard size ball bearings.Dimensions:Length: 10 mmOuter diameter: 11 mmInner diameter: 8 mmContents:2 pieces
Customers also viewed
Genuine Mielke spare/option part. Fits for FG, Losi, HPI.For onroad vehicles, less Grip or rain use.Backwards installedshoes make this clutch a "Converse" clutch!After many successes with the "normal" Power Gearshift clutch this is the next step.Made of high-strength aluminium 7075-T6! All components, including the pads, are manufactured on precision machines.Contents:1 piece
Genuine Mielke spare/option part. Fits FG Evo / RS 5 Tourenwagen / Harm SX 3 / Losi 5ive / Losi DBXL / HPI Baja.Backwards installedshoes make this clutch a "Converse" clutch!After many successes with the "normal" Power Gearshift clutch this is the next step.Made of high-strength aluminium 7075-T6! All components, including the pads, are manufactured on precision machines.Contents:1 piece
Genuine Mielke spare/option part. Fits FG Evo / RS 5 Tourenwagen / Harm SX 3 / Losi 5ive / Losi DBXL / HPI Baja.Backwards installedshoes make this clutch a "Converse" clutch!After many successes with the "normal" Power Gearshift clutch this is the next step.Made of high-strength aluminium 7075-T6! All components, including the pads, are manufactured on precision machines.Contents:1 piece
Genuine Mielke spare/option part. Fits Harm SX 4 / FG 2020 / some F1 cars / Harm Formel FX 3.Backwards installedshoes make this clutch a "Converse" clutch!After many successes with the "normal" Power Gearshift clutch this is the next step.Made of high-strength aluminium 7075-T6! All components, including the pads, are manufactured on precision machines.Contents:1 piece Not for FG Formula 1 sportsline models!
Genuine FG spare/option part.Handy auxiliary tool to press-in ball bearings, guide bushes a.s.o. A jaming of ball bearings or guide bushes is almost impossible. Also suitable for dismounting of cooling fans and clutches at Zenoah engines. For Solo only suitable for cooling fans.
The new slick tyre from PMT. Allowed in the Race Car Series! Novelty! Combines performance and durability. The perfect tyre for long turns and fast lap times.Dimension:Outside diameter: approx. 116 mmWidth: approx. 65 mmRims: 18 mm square driveContents:2 piece
Item N° y0656 Shocks for Bigscale cars 1/6 and 1/5, 173 mm long, 2 pcs.GD type extra high capacity shock for largescale cars. Shock comes complete with spring and is factory filled.Dimensions:Mounting hole distance (extended): 173 mmTotal length (extended): 190 mmTravel: 56 mmShock shaft diameter: 6 mmBody diameter: 30 mm