Skip to main content Skip to search Skip to main navigation
EXTRA 20% off Outlet*. Use Code: EXTRA20 at checkout!!
+49 2151 820200 Mon-Fri 9 am - 6 pm, Sa 9 am - 1 pm

y0656 Shocks for Bigscale cars typ GD 1/6 and 1/5, 173 mm long, 2 pcs.

Product information "y0656 Shocks for Bigscale cars typ GD 1/6 and 1/5, 173 mm long, 2 pcs."

Item N° y0656
Shocks for Bigscale cars 1/6 and 1/5, 173 mm long, 2 pcs.


GD type extra high capacity shock for largescale cars. Shock comes complete with spring and is factory filled.

Dimensions:
Mounting hole distance (extended): 173 mm
Total length (extended): 190 mm
Travel: 56 mm
Shock shaft diameter: 6 mm
Body diameter: 30 mm

0 of 0 reviews

Average rating of 0 out of 5 stars

Leave a review!

Share your experiences with other customers.


Accessories / Spare parts

Average rating of 0 out of 5 stars

y0350 Offroad tuning spring Dirt-Spring for GD
Genuine HT spare/option part. Fits Carson Gas Devil/ Hell Devil 4x4. Not for Thunderbolt!.Measures:Inna diameter: 31,4 mmOuter diameter: 37 mmLength short spring: 103 mmCoils short spring: 8 StückLength long spring: 143 mmCoils long spring: 10 StückFront axle:VersionMeasuresColorItem N°GD012.3 x 103 mmyellowy0350/01GD022.4 x 103 mmredy0350/02GD032.6 x 103 mmbrowny0350/03GD042.75 x 103 mmbluey0350/04GD052.8 x 103 mmsilvery0350/05GD062.9 x 103 mmblacky0350/06Rear axle::VersionMeasuresColorItem N°GD072.3 x 143 mmyellowy0350/07GD082.4 x 143 mmredy0350/08GD092.6 x 143 mmbrowny0350/09GD102.75 x 143 mmbluey0350/10GD112.8 x 143 mmsilvery0350/11GD122.9 x 143 mmblacky0350/12HelpThe stock springs have 2.5 mm wire diameter. The Gas Devil / Titan shocks are factiry filled with silicone oil 500, which is slightly soft in rear and way to soft in front. In rear brown springs with oil in the 800 - 900 range or blue springs with 900 - 1000 range oil should be fine for bashing. In front blue springs and 1500 silicone oil are a good point to start from. Due to the size of the shocks you need two bottles of oil pes axle.Contents:2 pieces

€24.90*

Customers also bought

Average rating of 0 out of 5 stars

86632 HPI Set screw M5 x 3 x 22 mm
Genuine HPI spare/option part. Contents:10 pieces

€4.20*

Average rating of 0 out of 5 stars

6729/04 FG Allen Grub screw M4x4 mm, 15 pieces
Genuine FG spare/option part.Part is delivered in silver or black color from vendor!Content:15 pieces

€3.30*

Average rating of 0 out of 5 stars

y0674/01 Cable ties black 2,5 x 140 mm, 100 pcs.
Genuine HT spare/option part. Cable tie for one time tightening / sealing / fastening. For example on drive shaft boots, fuel hoses, brake lines and many more.Specification:Size: 2,5 x 140 mmHolding strength: 18 kgTemperature range: -40°C to +85°CContents:100 piece

€5.90*

Average rating of 0 out of 5 stars

6732/07 FG E-clip spring steel 7 mm
Genuine FG spare/option part. Fits FG clutch bell and FG + Carson layshaft.Part is delivered in silver or black color from vendor!Content:15 pieces

€3.30*

Customers also viewed

Average rating of 0 out of 5 stars

s054406 Front shocks short, complete, 2 pcs.
Item N° s054406 Front shocks short, complete, 2 pcs.Mesaures:Spring length: 120 mmSpring inner diameter: 24 mmShock diameter: 22 mmBottom mounting hole distance: 154 mmRod end diameter top: 7,5 mm (without ball joints) bottom: 7,5 mm (without ball joints)

€94.90*

Average rating of 0 out of 5 stars

305029, shock absorbers front, Comanche / Attack Evo, 2 pcs
Mounting hole distance: 119 mmTravel: 21 mmDiameter: 16 mm

€45.70*

Average rating of 0 out of 5 stars

32488 Carson front shock absorbers 1/5, 2 pcs.
Carson C5 OEM shocksC5 oil pressure shocks, factory filled, complete with springs, metal body, shaft end and upper mounting tab made of plastic.Dimensions:Lower mounting hole diameter: 4 mmUpper mounting hole diameter: 5 mmTotal length: approx. 135 mmMounting hole distance: approx. 120 mmTravel: 30 mmDiameter: 16 mm

€39.90*

Average rating of 0 out of 5 stars

y1137/04 GPM-Big Bore Premium shock absorber for FG Monster/Stadium Truck 4WD, set
Set consists of 4 dampers. Premium version, suitable for FG, Carson / Smartech etc. Fully assembled and filled.  Special features: 16 mm inner diameter for higher oil volume Volume equalisation Housing and screw connections made entirely of aluminium Hard anodised housing Precision piston made of Delrin, machined (no moulded part!) Aluminium piston rod base and aluminium spring plate Replaceable bearing bushes in the mounting eyes Pre-filled with 1000 silicone oil. For the following models: FG 4WD: Monster Truck, Monster Jeep, Monster Hummer, Stadium Truck, Stadium Jeep, Stadium Hummer, Off-Road Beetle  Set contents: Four long dampers with 5 mm mount in the upper damper caps. Damper feet one pair short, one pair long (4WD MT version).  We recommend our progressive off-road tuning shock absorber springs from the "Dirt-Spring M" series, part number y0321, for the shock absorbers.  The original springs can also be used on FG models!  Silicone oil recommendation:  The GPM-Spezial Cross shock absorbers are filled with silicone oil viscosity 1000. This viscosity provides very good damping properties at normal outside temperatures.  If softer damping is required, oil with a viscosity of 500 or 600 is recommended; for harder damping, 1500 or higher is recommended.  One 50 ml bottle of y0038 is sufficient for five long or six short dampers.

€149.90*

Average rating of 0 out of 5 stars

2011 Mecatech Big Bore Shocks
Genuine Mecatech spare/option part. The new Mecatech Big Bore shock absorbers with piggy back volume compensation reservoirs use normal silicone oil. The increased diameter in combination with the separate volume compensation via a floating piston of the new MecaTech Big Bore shocks allows for a very constant driving. This results in improved traction and optimized handling.The Big Bore shocks fit most 1/5 scale onroad cars.The outstanding craftsmanship guarantees a perfect seal; the shocks come w/o springs. The Big Bore shocks feature aluminum shock ends with replaceable bushings. Technical specifications: Total length: 120 mmDistance of mounting holes: 110 mm center/centerMounting hole diameter: 4.10 mmThickness of shock ends: 6 mmMax shock/spring travel: 30 mmWeight without oil: 46 g eachWeight without oil with spring: 68 g eachRecommended silicone oil:Mecatech recommends silicone oil with a viscosity of 6,000 to 8,000 for the front axle and 3,000 to 5,000 for the rear.Content:1 set

€175.00*

Average rating of 0 out of 5 stars

7200 FG alloy shock absorber 04 short
Genuine FG spare/option part. The alloy housing has an outside thread to adjust the damper spring. The upper alloy shock absorber seal is equipped with a ventilation boring which makes the refilling if the damper easier. Completely new is the lower shock absorber seal with the plastic guiding bushes for the damper piston rod and for an easier chaning of the o-rings. The alloy adjusting ring has a socket for the spring collet and an adjusting mark. The shock absorber has an diameter of approx. 16 mm. Suitable for all damper springs with approx. 17 mm inside diameter .With 110 mm hole distance.Contents:2 pieces

€67.95*

Average rating of 0 out of 5 stars

BJ186F GPM Shocks for HPI-Baja 5, Carson Wild GP Attack cars front
Fully assembled and factory filled with 1.000 viscosity silicone oil. Including springs which can be adjusted via a threaded collar. The excellent quality GPM shocks fit all cars of the HPI Baja 5 series, Carson Wild GP Attack and feature an extremely massive 7 mm rod. The GPM shocks cases and rod ends are completely made of aluminum and equipped with replaceable bushings at the upper and lower mounting points.The external volume control is more efficient than built-in versions with membrane or foam element. Compared with the technically similar solution of a floating balance piston inside of the shock absorber body there is the advantage that no length of the shock absorber is needed for the volume compensation. Furthermore the additional housing surface of the equalizing chamber helps in cooling the oil. Dimensions (front):distance between mounting holes (extended): 187 mm travel: 62 mm li> Outer diameter: 28 mm Mounting specifications: top and bottom 12 mm wide ball mount with 4 mm bore The GPM shocks are filled with 1.000 viscosity silicone oil. For a firmer setting 1.500 or higher viscosity silicone oil is recommended. If a softer setup is required, 900 or lower viscosity oil should be used.

€129.90*
Loading...
Upload in progress, please be patient ...
Shopware-Theme Development Shopware-Agency