70 products found for "clarks_52023000"

rc-car-online - Home

52023010 Lightscale adapter 10° angled, aluminum, for Lightscale touring car airbox

Genuine Lightscale spare/option part. The 10 ° downward angled adapter for the Lightscale touring car air box is made from high quality aluminum and uses an O-ring for sealing; which prevents the airbox slipping as well. The adapter features a slight reverse taper on the outside, making it virtually impossible for the airbox to come loose.The aluminum adapter comes with O-ring, screws for installation, gasket and hose clamp included.Contents:1 set

€65.90*

50032200 Clarks Upgradekit SDT auf STX

Genuine Lightscale spare/option part. Contents:1 piece

€119.00*

52023011 Lightscale adapter 10° angled, plastic, for Lightscale touring car airbox

The 10 ° downward angled adapter for the Lightscale touring car air box is made from high quality plastic (weight-reduced) and uses an O-ring for sealing; which prevents the airbox slipping as well. The adapter features a slight reverse taper on the outside, making it virtually impossible for the airbox to come loose.The plastic adapter comes with O-ring, screws for installation, gasket and hose clamp included.

€49.90*

LOS252023 Differential housing 6IX

Genuine Losi spare/option part.Content:1 pieces

€15.99*

s23003, Cylinder set for PT 23

With mounting screws and gasket.Please note: It is recommended to use a gasket sealer with every gasket on an engine. This gives better sealing anda longer lasting gasket

€59.90*

LOS252022 Gear Box 6IX

Genuine Losi spare/option part.Contents:1 piece

€20.99*

3000-21 Mecatech T-Connector

Genuine Mecatech spare/option part. Replacement part for Mecatech Cross Hydro. Content:1 piece

€21.90*

y3000-23 Mecatech Bottle oil 50 ml

Replacement part for Mecatech Cross Hydro. Content:1 piece / 50 ml

Content: 50 Milliliter (€154.00* / 1000 Milliliter)

€7.70*

3000-23 Mecatech Bottle oil 50 ml

Genuine Mecatech spare/option part. Replacement part for Mecatech Cross Hydro. Content:1 piece / 50 ml

Content: 50 Milliliter (€154.00* / 1000 Milliliter)

€7.70*

s23005, Piston set PT23

Set includes:- piston- piston pin- circlips - spacers for needle bearing

€19.90*

LOS252025 Differential Outdrive 6IX

Genuine Losi spare/option part.Content:2 pieces

€31.99*

3000-03 Mecatech Pins, set

Replacement part for Mecatech Expert and Cross Hydro

€3.60*

s23004, Crankcase set PT 23/28

Complete crankcase with ball bearings, crankshaft seals, gasket and bolts.

€49.90*

3000-24 Mecatech Brakedisk steel/epoxy

mec_3000_24 Material: Epoxy

Genuine Mecatech spare/option part. Replacement part for Mecatech Cross Hydro. Epoxy or steel to choiser.Dimensions: Strength: 1,5 mm Outside diameter: 64 mmContent:1 piece

€9.90*

3000-15c Mecatech Expert brake pad

Content:1 PairGenuine Mecatech spare/option part.

€24.90*

3000-17 Mecatech Steelpins, 4 pcs.

Replacement part for Mecatech Expert and Cross Hydro

€2.50*

LOS252026 Differential ring gear 6IX

Genuine Losi spare/option part.Content:1 piece

€41.99*

s23007, Clutch set PT 23/28

Clutch shoes with spring, mounting bolts and washers.

€27.70*

s23006, Crankshaft PT23/28, set

With crank key included.

€59.90*

y3000 Light cover decals, set #1

Suitable for the lights on off-road cars like Losi 5ive-T or HPI Baja cars and also for embellishment of other body shells.Dimensions:Diameter: 32 mmContent:Four naughty orange smiliesFour frightened yellow smiliesFour red crosshairsFour green off-road srokes

€4.90*

300001318 Carson Assembly wrench

Genuine Carson spare/option part. Contents:1 piece

€19.90*

3000-35 Mecatech Brakedisk epoxy for expert

Genuine replacement part for Mecatech Expert.Dimensions: Outer diameter: 69 mmInternal dimension: 18 mm (square)Material thickness: 1,8 mm Content:2 pieces

€25.90*

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

3000-06 Mecatech seals for for piston/master cylinder - set

€5.50*

LOS252020 Universal Rebuild Kit (2): 1:5 4wd DBXL+MTXL

Genuine Losi spare/option part.Replacing the pins on DBXL drive shafts LOS252001, LOS252021, LOS252019: Remove set screw completelyOpen bench vise until the pin just fits between the jaws Position shaft on vice, held by a second person if necessaryDrive pin out with light hammer blows using a pin punch or a suitable comparable tool If Loctite was excessively used in the assembly, heating the shaft end may be required. Depending on the thread locking compound, you will strive for a value of 200 - 300°C. The shaft end must not be annealed! An annealed pin will mushroom on impact and make it very difficult to drive it out if not impossible. When installing the new pin from set LOS252020 make sure that the flat section of the pin is positioned under the set screw. The set screw should be just slightly tightened against the pin using high strength thread locker (link). Firm tightening puts the pin under preload and increases the risk of breakage!Contents:1 set

€11.99*

70 products found for "clarks_52023000"

Filter products

rc-car-online - Home