Skip to main content Skip to search Skip to main navigation
EXTRA 20% off Outlet*. Use Code: EXTRA20 at checkout!!
+49 2151 820200 Mon-Fri 9 am - 6 pm, Sa 9 am - 1 pm

3000-35 Mecatech Brakedisk epoxy for expert

Product information "3000-35 Mecatech Brakedisk epoxy for expert"

Genuine replacement part for Mecatech Expert.

Dimensions:
  • Outer diameter: 69 mm
  • Internal dimension: 18 mm (square)
  • Material thickness: 1,8 mm


018dda1f891b71f4bc249ff96edb62ab.jpg018dda1f8d157085ae9e44ed194426fa.jpg


Content:
  • 2 pieces

0 of 0 reviews

Average rating of 0 out of 5 stars

Leave a review!

Share your experiences with other customers.


Similar products

Average rating of 0 out of 5 stars

3000-37 Mecatech valve cover, 6 pcs.
Replacement part for Mecatech Expert and Cross Hydro.Inner diameter of eylet and cap: 4 mmLength: 21 mm

€9.90*

Average rating of 0 out of 5 stars

3000-22 Mecatech Brakeline 1 meter, 1 pce.
Replacement part for Mecatech Expert and Cross Hydro.Dimensions:Inner diameter: 2.7 mmOuter diameter: 4 mm

€4.90*

Average rating of 0 out of 5 stars

3000-06 Mecatech seals for for piston/master cylinder - set

€5.50*

Average rating of 0 out of 5 stars

3000-23 Mecatech Bottle oil 50 ml
Genuine Mecatech spare/option part. Replacement part for Mecatech Cross Hydro. Content:1 piece / 50 ml

Content: 50 Milliliter (€154.00* / 1000 Milliliter)

€7.70*

Average rating of 0 out of 5 stars

3000-24 Mecatech Brakedisk steel/epoxy
mec_3000_24 Material: Epoxy
Genuine Mecatech spare/option part. Replacement part for Mecatech Cross Hydro. Epoxy or steel to choiser.Dimensions: Strength: 1,5 mm Outside diameter: 64 mmContent:1 piece

€9.90*

Average rating of 0 out of 5 stars

3000-38 Mecatech brake calliper complete, 1 piece
Product information "3000-38 Mecatech brake calliper complete, 1 piece" Original Mecatech spare part. Mecatech Expert brake caliper complete with all connections, 1 piece. Suitable for FG steering knuckle (not Evo 2020 models), Can be used on the right and left

€89.90*

Average rating of 0 out of 5 stars

3000-16 Mecatech Expert brake pad return spring
Genuine Mecatech spare/option part. Contents:8 piece

€7.50*

Average rating of 0 out of 5 stars

3000-02 Mecatech Bleeding valve, 2 pce.
Replacement part for Mecatech Expert and Cross Hydro

€17.90*

Average rating of 0 out of 5 stars

y3000-23 Mecatech Bottle oil 50 ml
Replacement part for Mecatech Cross Hydro. Content:1 piece / 50 ml

Content: 50 Milliliter (€154.00* / 1000 Milliliter)

€7.70*

Average rating of 0 out of 5 stars

3000-36 Mecatech Expert brake pad, steel
Genuine Mecatech spare/option part. Fits Mecatech expert.Content:4 pieces

€49.90*

Average rating of 0 out of 5 stars

3000-05 Mecatech Bushing for Mastercylinder, 1 pce.
Replacement part for Mecatech Expert and Cross Hydro

€4.90*

Average rating of 0 out of 5 stars

3000-14 Mecatech Expert piston spring - set

€12.90*

Customers also viewed

Average rating of 0 out of 5 stars

3000-24 Mecatech Brakedisk steel/epoxy
mec_3000_24 Material: Epoxy
Genuine Mecatech spare/option part. Replacement part for Mecatech Cross Hydro. Epoxy or steel to choiser.Dimensions: Strength: 1,5 mm Outside diameter: 64 mmContent:1 piece

€9.90*

Average rating of 0 out of 5 stars

1000-40 Mecatech brake rotors, 2 pcs.
Replacement part for Mecatech twin piston hydraulic brake.Measures:Diameter 64 mmThickness 1.9 mm18 mm square

€29.90*

Average rating of 0 out of 5 stars

8457/03 FG Competition brake lining glued for FG and HPI disc brakes
Genuine FG spare/option part. New competition brake lining with good braking characteristics and low wear. Glued on a steel plate.Spare part for: 6250/05, 6250/06, 8450/05, 8452/05, 10452, 10453 and y0056 HT - Baja 5B/SS premium front disk brake.Measures:Length approx. 50 mmWidth approx. 10 mmThickness approx. 5.5 mmMounting hole distance 40 mmContents:4 pieces

€44.50*

Average rating of 0 out of 5 stars

y1436 SPEED TEC CRANK Ignition-System (CIS)
y1436 Tools: Without tool
New ignition system for RC Car race engines with air baffles, special 62 mm balanced flywheel, modified ignition coil mount and special Löhin tuning ignition (#1361). For Zenoah G230/240/260/270/290/320 und CY / Fuelie / Losi engines.A much smaller and lighter flywheel, in conjunction with the special air baffles, ensures that the engine gets more cooling air then with previously available modified flywheels! The fan from the CIS-ignition with fins on both sides is about 30% lighter (!) than the stock version! Needless to say an engine equipped with such a flywheel revs considerably faster and significantly higher, of course. This in itself is nothing new, because modified flywheels, even though not 30% lighter, are pretty common on modified engines. However, the problem with these modified flywheels is maintaining sufficient cooling for the engine, which is absolutely mandatory for a reliably running engine! The 20% smaller in diameter flywheel is primarily responsible for the very substantial performance increase by the SPEED TEC CRANK ignition . The lower inertia, which is quite crucial for engine performance, allows for an extremely fast and higher revving engine! The air baffles of the CIS-ignition ensure that the path of the cooling air is matched to the reduced diameter of the CIS-fan wheel and the engine gets more cooling! As our product video shows, the stock engine gained near 2,000 rpm through installation of the SPEED TEC CIS-ignition ! But perhaps the optimized torque is even more convincing. This for 30% reduced and 20% more centrally positioned flywheel mass gives your engine a stunning power increase. Other benefits of SPEED TEC CIS - ignition system: Fits all Zenoah, as well as HPI, Losi-, CY 1/5 & 1/6 engines (incl. Zenoah G320) No modifications to the cylinder or the ignition coil mount required! No assembly of the flywheel, thus 100% exact fit and running true The enclosed Löhin ignition system is designed for speeds up to 25,000 rpm! The baffles protect the flywheel from debris (stones, etc.) Complete with Löhin ignition and all necessary parts in a nice special bag Easy installation: Remove the stock ignition system - install the CIS-ignition - done! The color of the ignition cable and the spark plug cap may vary.

€329.00*

Average rating of 0 out of 5 stars

67570 FG Chassis for Leopard 2+4 Sportsline, TR2+4 and Fun Cross
Genuine FG spare/option part.Standart chassis for the Sportsline Leopard 2 and 4WD, TR2, TR4 and Fun Cross.Contents:1 piece

€158.50*

Average rating of 0 out of 5 stars

3000-15 Mecatech Expert brake pad - 4 pcs.

€39.90*

Average rating of 0 out of 5 stars

1001 Mecatech twin piston hydraulic brake, set incl. brake bleeding set
Mecatech twin piston hydraulic brakeIt is the best brake for RC cars in the large model range from teh Mecatech FW01 and can be retrfitted to many FG models.Best quality for the highest demands!- The main brake cylinder is equipped with volume compensation and ensures constant braking pressure with good metering.- The brake calipers have a double-piston system and steel brake pads and teh epoxy brake discs ensure short braking distances. Installation instructions!Suitable for all FG off-road 2WD/4WD models (Leopard basis) and also for all FG off-road 2WD and 4WD models on a Marder basis with a laterally angled chassis such as (buggy / monster / stadium with original FG 700 ml tank) only with mounting base.Mounting base for all FG Offroad models:9438/01 a> Aluminum wheel chockWhen installing in an FG Evo 2020, 2020.1, 2020.2 and FG Raceline you need the adapter plates y1515.For FG Evo 12-14 models with the wishbone no. evo-2013-1-st-.html">1100/10 or 1100/11, the brake fits without additional accessories.For FG Evo 04-08 models with the wishbones no. evo-04-08-1st-.html">1100/05 or 1100/05, the brake must be 1100/05.When running wheel squares with Seeger ring, the ring has to be removed.Not for FG Formula 1 models.

From €299.90*
Loading...
Upload in progress, please be patient ...
Shopware-Agency Shopware-Theme Development